Contact us to receive an offer.
| Manufacturer | Haas |
|---|---|
| Model | VF-2 SSHE |
| Year | 2007 |
| Location | Switzerland
|
This Haas VF-2 SSHE vertical machining center, manufactured in 2007, is designed for versatile and precise machining operations. It features a robust construction with overall dimensions of 3300 mm in length, 2230 mm in width, and 2570 mm in height, and weighs approximately 6200 kg. The machine supports three simultaneous axes with travel distances of 762 mm (X-axis), 406 mm (Y-axis), and 508 mm (Z-axis), allowing for complex part machining within a working envelope. The worktable measures 914 mm by 356 mm and can accommodate parts weighing up to 680 kg.
Equipped with a powerful 22 kW spindle motor, the spindle can reach speeds up to 12,000 rpm, suitable for high-speed machining tasks. The spindle uses a BT40 nose configuration. The tool magazine holds 25 tool pockets, arranged as 24+1, facilitating efficient tool changes during operation.
The machine includes a range of accessories and features to enhance functionality and ease of use: preparation for a fourth axis, a coolant system with chip flushing and a programmable, rotatable coolant nozzle, as well as a chip conveyor to manage machining debris. It is also fitted with a Renishaw measuring feeler gauge and workpiece measurement probe, supporting precision setup and in-process inspection.
The control panel is mounted on the right side and includes a screen displaying machine coordinates, status, and active commands, along with various buttons and a rotary switch for manual control. Interior lighting ensures good visibility within the machining area. The machining area shows typical signs of use such as metal chips and coolant residue, indicating active service. The probe and spindle area appear clean and well maintained. Electrical and pneumatic connections are visible at the rear, with no apparent damage or missing parts. Overall, the machine is installed in a workshop environment with organized cables and hoses, and the exterior is clean and intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Controller :
Haas Automation
Number of axis simultaneous
3
Table length
914 mm
Table width
356 mm
Table load max.
680 kg
Longitudinal travel (X-axis)
762 mm
Transversal travel (y-axis)
406 mm
Vertical travel (z axis)
508 mm
Tool magazine number of tools
24+1
Spindle nose: BT
40
Spindle speeds:
stepless
from
0 rpm
up to
12000 rpm
Rapid traverse:
35 m/min
Voltage 50 Hz 3x
400 Volt
Spindle motor
22 kW
Machine's weight about
6200 kg
Overall dimensions machine:
Length
3300 mm
Width
2230 mm
Height
2570 mm
Various accessories:
Preparation 4the axis
Coolant chip flushing
Programmable and rotatable coolant nozzle
Coolant system
Measuring feeler gauge Renishaw
Workpiece measurement Renishaw
Chip conveyor
Lamp
Rigid tapping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Haas VF-2 SSHE machining center manufactured?
This Haas VF-2 SSHE machining center was manufactured in 2007.
How many hours has this Haas VF-2 SSHE operated?
This Haas VF-2 SSHE has operated for 3900 hours.
What type of machine is this Haas VF-2 SSHE?
This Haas VF-2 SSHE is a vertical machining center.
When was the machine manufactured?
The machine was manufactured in 2007.
Is this Haas VF-2 SSHE used?
This Haas VF-2 SSHE vertical machining center is used.
When was this Haas VF-2 SSHE manufactured?
This Haas VF-2 SSHE vertical machining center was manufactured in 2007.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 1, 2026 |
Controller :
Haas Automation
Number of axis simultaneous
3
Table length
914 mm
Table width
356 mm
Table load max.
680 kg
Longitudinal travel (X-axis)
762 mm
Transversal travel (y-axis)
406 mm
Vertical travel (z axis)
508 mm
Tool magazine number of tools
24+1
Spindle nose: BT
40
Spindle speeds:
stepless
from
0 rpm
up to
12000 rpm
Rapid traverse:
35 m/min
Voltage 50 Hz 3x
400 Volt
Spindle motor
22 kW
Machine's weight about
6200 kg
Overall dimensions machine:
Length
3300 mm
Width
2230 mm
Height
2570 mm
Various accessories:
Preparation 4the axis
Coolant chip flushing
Programmable and rotatable coolant nozzle
Coolant system
Measuring feeler gauge Renishaw
Workpiece measurement Renishaw
Chip conveyor
Lamp
Rigid tapping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Haas VF-2 SSHE machining center manufactured?
This Haas VF-2 SSHE machining center was manufactured in 2007.
How many hours has this Haas VF-2 SSHE operated?
This Haas VF-2 SSHE has operated for 3900 hours.
What type of machine is this Haas VF-2 SSHE?
This Haas VF-2 SSHE is a vertical machining center.
When was the machine manufactured?
The machine was manufactured in 2007.
Is this Haas VF-2 SSHE used?
This Haas VF-2 SSHE vertical machining center is used.
When was this Haas VF-2 SSHE manufactured?
This Haas VF-2 SSHE vertical machining center was manufactured in 2007.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Haas VF-2 SSHE vertical machining center, manufactured in 2007, is designed for versatile and precise machining operations. It features a robust construction with overall dimensions of 3300 mm in length, 2230 mm in width, and 2570 mm in height, and weighs approximately 6200 kg. The machine supports three simultaneous axes with travel distances of 762 mm (X-axis), 406 mm (Y-axis), and 508 mm (Z-axis), allowing for complex part machining within a working envelope. The worktable measures 914 mm by 356 mm and can accommodate parts weighing up to 680 kg.
Equipped with a powerful 22 kW spindle motor, the spindle can reach speeds up to 12,000 rpm, suitable for high-speed machining tasks. The spindle uses a BT40 nose configuration. The tool magazine holds 25 tool pockets, arranged as 24+1, facilitating efficient tool changes during operation.
The machine includes a range of accessories and features to enhance functionality and ease of use: preparation for a fourth axis, a coolant system with chip flushing and a programmable, rotatable coolant nozzle, as well as a chip conveyor to manage machining debris. It is also fitted with a Renishaw measuring feeler gauge and workpiece measurement probe, supporting precision setup and in-process inspection.
The control panel is mounted on the right side and includes a screen displaying machine coordinates, status, and active commands, along with various buttons and a rotary switch for manual control. Interior lighting ensures good visibility within the machining area. The machining area shows typical signs of use such as metal chips and coolant residue, indicating active service. The probe and spindle area appear clean and well maintained. Electrical and pneumatic connections are visible at the rear, with no apparent damage or missing parts. Overall, the machine is installed in a workshop environment with organized cables and hoses, and the exterior is clean and intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 1, 2026 |
Haas VF-2 SSHE
Obráběcí centrum - vertikální Haas VF-2 SSHE
Haas VF-2 SSHE
Haas VF-2 SSHE Bearbeitungszentrum Vertikal
Haas VF-2 SSHE
Haas VF-2 SSHE Machining center - vertical
Centro de mecanizado vertical Haas VF-2 SSHE
Centre d'usinage vertical Haas VF-2 SSHE
Haas VF-2 SSHE
Haas VF-2 SSHE
Centro di lavoro verticale Haas VF-2 SSHE
Haas VF-2 SSHE
Haas VF-2 SSHE
Pionowe centrum obróbcze Haas VF-2 SSHE
Haas VF-2 SSHE
Haas VF-2 SSHE
Haas VF-2 SSHE Вертикальный обрабатывающий центр
Haas VF-2 SSHE
Haas VF-2 SSHE
Dikey işleme merkezi Haas VF-2 SSHE
EN
- Languages
English (GB)