| Manufacturer | GROB |
|---|---|
| Model | G 350 |
| Year | 2008 |
| Location | Germany
|
GROB G 350 five-axis machining center, manufactured in 2008, with Heidenhain iTNC 530 control system. The machine has X, Y and Z travels of 600 mm, 770 mm and 805 mm respectively. It is equipped with a motor spindle rated at 36 kW, with a maximum speed of 18,000 rpm and stated torque of 47 Nm. The spindle uses an HSK 63 tool holder.
The NC swivel rotary table has A-axis travel of 240° and B-axis travel of 360°. The pallet size is 400 × 400 mm, with a stated maximum table load of 300 kg and a 600 mm clearance circle. The machine has a two-pallet changer. Its wheel-type tool magazine has 40 stations, with a pick-up tool changer. Stated tool limits are 365 mm maximum length and 72 mm maximum diameter, or 160 mm with the specified allowance noted in the listing.
Equipment and features include direct measuring systems with glass scales on all axes, a chip conveyor, through-spindle coolant, probe preparation for workpiece measurement, a mechanical emulsion mist separator and an electronic handwheel for setup. The enclosed machine has white and blue exterior panels and a separate operator console with display and keyboard. Inside the work area are a large rotary assembly, rectangular tooling plate and spindle head. The lower blue base panel has scuffing and chipped paint along its bottom edge. Interior surfaces and the fixture show visible staining, residue and discoloration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
GROB G 350
Year of manufacture: 2008
Control system: Heidenhain iTNC 530
Speed: 18,000 rpm
X/Y/Z travel: 600/770/805 mm
Tool holder: HSK 63
____________
Description:
General:
Year of manufacture: 2008
Control system: Heidenhain iTNC 530
X/Y/Z travel: 600/770/805 mm
Speed: 18,000
Tool holder: HSK 63
Spindle:
Technology: Motor spindle
Speed: 18,000 rpm
Power: 36 kW
Torque: 47 Nm
Tool holder: HSK 63
NC swivel rotary table:
A-axis: 240°
B-axis: 360°
Pallet size: 400 x 400 mm
Max. table load: 300 kg
Clearance circle: 600 mm
Tool magazine:
Technology: Wheel magazine
Tool changer: Pick-up
Number of stations: 40
Max. tool length: 365 mm
Max. tool diameter: 72 (160) mm
Equipment / accessories:
Measuring systems: Direct on all axes (glass scales)
Automation: 2-pallet changer
Chip disposal: Chip conveyor
Coolant supply: Through-spindle coolant system
Workpiece measurement: Probe preparation
Emulsion mist separator: Mechanical
Setup mode: Electronic handwheel
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 41 |
| Last activity | Oct. 28, 2026 |
Gläsener+Schmidt GmbH is a leading manufacturer based in Germany, specializing in high-quality machine tools and precision engineering solutions. With decades of experience in the industry, the company has established itself as a trusted partner for businesses seeking innovative and reliable machinery. Their commitment to excellence is evident in every product they offer, ensuring that clients receive the best tools to enhance their manufacturing processes. At Gläsener+Schmidt, the focus is on delivering cutting-edge technology that meets the evolving needs of various sectors, including automotive, aerospace, and general manufacturing. The company prides itself on its state-of-the-art production facilities and a dedicated team of engineers who work tirelessly to develop solutions that optimize efficiency and productivity. Their extensive range of products includes CNC machines, milling machines, and specialized tooling, all designed to provide superior performance and durability. Customer satisfaction is at the heart of Gläsener+Schmidt's operations. They offer tailored solutions and exceptional after-sales support, ensuring that clients can maximize the potential of their investments. By choosing Gläsener+Schmidt GmbH, businesses not only gain access to top-tier machinery but also a partnership that prioritizes innovation, quality, and service excellence. Experience the difference with Gläsener+Schmidt, where precision meets performance.
GROB G 350
Year of manufacture: 2008
Control system: Heidenhain iTNC 530
Speed: 18,000 rpm
X/Y/Z travel: 600/770/805 mm
Tool holder: HSK 63
____________
Description:
General:
Year of manufacture: 2008
Control system: Heidenhain iTNC 530
X/Y/Z travel: 600/770/805 mm
Speed: 18,000
Tool holder: HSK 63
Spindle:
Technology: Motor spindle
Speed: 18,000 rpm
Power: 36 kW
Torque: 47 Nm
Tool holder: HSK 63
NC swivel rotary table:
A-axis: 240°
B-axis: 360°
Pallet size: 400 x 400 mm
Max. table load: 300 kg
Clearance circle: 600 mm
Tool magazine:
Technology: Wheel magazine
Tool changer: Pick-up
Number of stations: 40
Max. tool length: 365 mm
Max. tool diameter: 72 (160) mm
Equipment / accessories:
Measuring systems: Direct on all axes (glass scales)
Automation: 2-pallet changer
Chip disposal: Chip conveyor
Coolant supply: Through-spindle coolant system
Workpiece measurement: Probe preparation
Emulsion mist separator: Mechanical
Setup mode: Electronic handwheel
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
GROB G 350 five-axis machining center, manufactured in 2008, with Heidenhain iTNC 530 control system. The machine has X, Y and Z travels of 600 mm, 770 mm and 805 mm respectively. It is equipped with a motor spindle rated at 36 kW, with a maximum speed of 18,000 rpm and stated torque of 47 Nm. The spindle uses an HSK 63 tool holder.
The NC swivel rotary table has A-axis travel of 240° and B-axis travel of 360°. The pallet size is 400 × 400 mm, with a stated maximum table load of 300 kg and a 600 mm clearance circle. The machine has a two-pallet changer. Its wheel-type tool magazine has 40 stations, with a pick-up tool changer. Stated tool limits are 365 mm maximum length and 72 mm maximum diameter, or 160 mm with the specified allowance noted in the listing.
Equipment and features include direct measuring systems with glass scales on all axes, a chip conveyor, through-spindle coolant, probe preparation for workpiece measurement, a mechanical emulsion mist separator and an electronic handwheel for setup. The enclosed machine has white and blue exterior panels and a separate operator console with display and keyboard. Inside the work area are a large rotary assembly, rectangular tooling plate and spindle head. The lower blue base panel has scuffing and chipped paint along its bottom edge. Interior surfaces and the fixture show visible staining, residue and discoloration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 41 |
| Last activity | Oct. 28, 2026 |
Gläsener+Schmidt GmbH is a leading manufacturer based in Germany, specializing in high-quality machine tools and precision engineering solutions. With decades of experience in the industry, the company has established itself as a trusted partner for businesses seeking innovative and reliable machinery. Their commitment to excellence is evident in every product they offer, ensuring that clients receive the best tools to enhance their manufacturing processes. At Gläsener+Schmidt, the focus is on delivering cutting-edge technology that meets the evolving needs of various sectors, including automotive, aerospace, and general manufacturing. The company prides itself on its state-of-the-art production facilities and a dedicated team of engineers who work tirelessly to develop solutions that optimize efficiency and productivity. Their extensive range of products includes CNC machines, milling machines, and specialized tooling, all designed to provide superior performance and durability. Customer satisfaction is at the heart of Gläsener+Schmidt's operations. They offer tailored solutions and exceptional after-sales support, ensuring that clients can maximize the potential of their investments. By choosing Gläsener+Schmidt GmbH, businesses not only gain access to top-tier machinery but also a partnership that prioritizes innovation, quality, and service excellence. Experience the difference with Gläsener+Schmidt, where precision meets performance.
France
2019
| Axis X | 762 mm |
|---|---|
| Axis Z | 507 mm |
| Type | Continuous |
| Table length | 630 mm |
| Max. part weight | 300 kg |
| Spindle taper | CT 40 |
| Spindle motor power | 22.4 kW |
| Axis Y | 508 mm |
|---|---|
| Type | Vertical |
| CNC | HAAS |
| Table width | 500 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 15000 rpm |
Spain
2012
| Axis X | 600 mm |
|---|---|
| Axis Z | 805 mm |
| Spindle taper | HSK A-63 |
| Axis Y | 770 mm |
|---|---|
| CNC | SIEMENS-840D |
| Max. spindle speed | 12000 rpm |
Germany
2008
| Axis X | 600 mm |
|---|---|
| Axis Z | 675 mm |
| Type of axis | Universal head |
| Spindle taper | HSKA63 |
| Number of pallets | 2 |
| Axis Y | 770 mm |
|---|---|
| CNC | Heidenhain iTNC 530 |
| Number of tool pockets | 40 |
| Max. spindle speed | 18000 rpm |
Germany
2011
| Axis X | 800 mm |
|---|---|
| Axis Z | 1020 mm |
| Max. part weight | 800 kg |
| Spindle taper | HSK-A63 |
| Axis Y | 950 mm |
|---|---|
| CNC | Heidenhain |
| Number of tool pockets | 60 |
| Max. spindle speed | 12000 rpm |
Germany
2012
| Axis X | 800 mm |
|---|---|
| Axis Z | 1020 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 950 mm |
|---|---|
| CNC | |
| Spindle taper | HSK-A63 |
Germany
2011
| Axis X | 600 mm |
|---|---|
| Axis Z | 800 mm |
| Type | |
| Type of axis | |
| Table width | mm |
| Number of tool pockets | |
| Max. spindle speed | 30000 rpm |
| Number of pallets |
| Axis Y | 770 mm |
|---|---|
| Type | Horizontal |
| CNC | |
| Table length | mm |
| Max. part weight | kg |
| Spindle taper | |
| Spindle motor power | kW |
Germany
2011
| Axis X | 600 mm |
|---|---|
| Axis Z | 750 mm |
| Type | |
| Type of axis | Universal head |
| Table width | mm |
| Number of tool pockets | |
| Max. spindle speed | rpm |
| Number of pallets |
| Axis Y | 855 mm |
|---|---|
| Type | Horizontal |
| CNC | |
| Table length | mm |
| Max. part weight | kg |
| Spindle taper | |
| Spindle motor power | kW |
Germany
2009
| Axis X | 600 mm |
|---|---|
| Axis Z | 675 mm |
| Number of tool pockets | 40 |
| Axis Y | 770 mm |
|---|---|
| CNC | Siemens 840D SL |
| Spindle taper | HSK-A63 |
China
2017
| Axis X | 800 mm |
|---|---|
| Axis Z | 1020 mm |
| Table length | 630 mm |
| Max. part weight | 800 kg |
| Max. spindle speed | 16000 rpm |
| Axis Y | 950 mm |
|---|---|
| CNC | Siemens 840D |
| Table width | 630 mm |
| Spindle taper |
5-осен обработващ център GROB G 350
5osé obráběcí centrum GROB G 350
GROB G 350 5-akset bearbejdningscenter
GROB G 350 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων GROB G 350
GROB G 350 5-axis machining center
Centro de mecanizado de 5 ejes GROB G 350
Centre d'usinage 5 axes GROB G 350
5-osni obradni centar GROB G 350
GROB G 350 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi GROB G 350
GROB G 350 5 ašių apdirbimo centras
GROB G 350 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe GROB G 350
Centro de usinagem de 5 eixos GROB G 350
Centru de prelucrare cu 5 axe GROB G 350
GROB G 350 5-осевой обрабатывающий центр
5-osni obradni centar GROB G 350
GROB G 350 5-axligt bearbetningscenter
5 eksenli işleme merkezi GROB G 350
EN
- Languages
English (GB)