Contact us to receive an offer.
| Manufacturer | Gleason |
|---|---|
| Model | No. 16 (3 units), No. 19 and No.453 |
| Year | |
| Location | Serbia
|
This listing offers multiple Gleason gear shaping and finishing machines, including three Gleason No. 16 Hypoid & Spiral Bevel Gear Generators, one Gleason No. 19 Hypoid Lapper, and one Gleason No. 453 Hypoid Cutter Sharpening Machine.
The Gleason No. 16 machines are designed for gear generation and format operations, capable of cutting both crown-wheel and pinion gears. They come equipped with hydraulic clamping, 263 change gears covering 1.5 and 2 modules, and clamping devices. Each unit also includes a cutter body.
The Gleason No. 19 Hypoid Lapper supports gear diameters up to 432 mm (17 inches) and has spindle distances and offsets allowing precise lapping operations. It can also be used as a tester. The maximum drive spindle speed is 1200 rpm. The maximum gear diameter can be increased with special lapping guards.
The Gleason No. 453 Hypoid Cutter Sharpening Machine accommodates spiral bevel cutters ranging from 89 mm to 457 mm (3.5 to 18 inches) in diameter, revacycle cutters of 406 mm and 457 mm (16 and 18 inches), and Coniflex cutters of 229 mm and 381 mm (9 and 15 inches). It removes stock at rates of 0.007 inches (0.18 mm) per roughing cycle and 0.002 inches (0.05 mm) per finishing cycle, with a grinding time of approximately 5 seconds per blade. The machine uses a 12-inch by 0.75-inch (305 mm by 19 mm) disc-type 30-degree bevel grinding wheel with a 4-inch (101.6 mm) bore diameter.
All machines bear the Gleason brand and show signs of use, including some dirt, wear, and minor rust patches, but appear structurally intact. Visible handwheel controls and protective covers with the Gleason branding are present. The machines are situated in a workshop environment with overhead lighting and industrial shelving. Several gear shaping tools and parts are stored nearby on racks and pallets. A cloth or rag is placed near the spindle area on one of the machines. The floor around the machines is generally clean with some scattered debris.
Please note that while the machines appear complete and structurally sound, no specific information regarding testing, operational status, or refurbishment is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Gleason No. 16 Hypoid & Spiral Bevel Gear Generator (3 units for sale)
All 3 machines are in excellent working condition and are offered with 263 change gears 1,5 and 2 modules and clamping devices.
- The machine can work in Generation Mode & also in Format Mode.
- The machine can cut both Crown-wheel & Pinion Gears.
- With Hydraulic Clamping, complete with Change Gears & equipped with a Cutter Body.
+
Gleason No.19 Hypoid Lapper
Max. Diameter of Gear - 432 mm (17")
Max. Distance from Center of Gear Spindle to nose of Pinion Spindle - 267 mm (10.5")
Max. Distance from Center of Pinion Spindle to nose of Gear Spindle - 273 mm (10.75")
Max. Offset of Gear Spindle above, or below, center of Pinion Spindle - 76 mm (3")
Max. Drive Spindle Speeds - 1200 rpm
- Max. Gear Diameter can be increased with special lapping guards.
- Machine can also be used as a tester.
- Machine is in excellent working condition.
+
GLEASON No. 453 Hypoid Cutter Sharpening Machine
PRINCIPAL SPECIFICATIONS:
Diameter of spiral bevel cutters 3.5” to 18” (89 to 457mm)
Diameter of revacycle cutters 16” & 18” (406, 457mm)
Diameter of Coniflex cutters 9” & 15” (229, 381mm)
Stock removed per cycle (roughing) .007" (0.18mm)
Stock removed per cycle (finishing) .002” (0.05mm)
Grinding time per blade 5 seconds
Type of wheel utilized Disc-Type 30-degree bevel
Size of wheel 12"x .75" (305x19mm)
Grinding wheel bore diameter 4" (101.6mm)
Machine is in excellent working condition.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many units are included with this Gleason No. 16?
This Gleason No. 16 Hypoid & Spiral Bevel Gear Generator includes 3 units of the same machine.
What type of machine is this Gleason No. 19?
This Gleason No. 19 is a Hypoid Lapper.
What is the function of this Gleason No. 453?
This Gleason No. 453 is a Hypoid Cutter Sharpening Machine.
Are all machines currently in working condition?
All machines are in working condition and were moved from the workshop to the warehouse when production stopped.
What is the range of diameters for the working heads included?
This equipment includes 35 working heads with diameters between 60 and 315 mm.
How many spare knives are included in this set?
This set includes 444 spare knives.
How many interchangeable gears are available for the Gleason machines?
There are a total of 299 interchangeable gears belonging to the Gleason machines.
What specifications do the 36 gears in this equipment have?
This equipment includes 36 gears with 6 grooves, module 2, straight teeth.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2024 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |
Gleason No. 16 Hypoid & Spiral Bevel Gear Generator (3 units for sale)
All 3 machines are in excellent working condition and are offered with 263 change gears 1,5 and 2 modules and clamping devices.
- The machine can work in Generation Mode & also in Format Mode.
- The machine can cut both Crown-wheel & Pinion Gears.
- With Hydraulic Clamping, complete with Change Gears & equipped with a Cutter Body.
+
Gleason No.19 Hypoid Lapper
Max. Diameter of Gear - 432 mm (17")
Max. Distance from Center of Gear Spindle to nose of Pinion Spindle - 267 mm (10.5")
Max. Distance from Center of Pinion Spindle to nose of Gear Spindle - 273 mm (10.75")
Max. Offset of Gear Spindle above, or below, center of Pinion Spindle - 76 mm (3")
Max. Drive Spindle Speeds - 1200 rpm
- Max. Gear Diameter can be increased with special lapping guards.
- Machine can also be used as a tester.
- Machine is in excellent working condition.
+
GLEASON No. 453 Hypoid Cutter Sharpening Machine
PRINCIPAL SPECIFICATIONS:
Diameter of spiral bevel cutters 3.5” to 18” (89 to 457mm)
Diameter of revacycle cutters 16” & 18” (406, 457mm)
Diameter of Coniflex cutters 9” & 15” (229, 381mm)
Stock removed per cycle (roughing) .007" (0.18mm)
Stock removed per cycle (finishing) .002” (0.05mm)
Grinding time per blade 5 seconds
Type of wheel utilized Disc-Type 30-degree bevel
Size of wheel 12"x .75" (305x19mm)
Grinding wheel bore diameter 4" (101.6mm)
Machine is in excellent working condition.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many units are included with this Gleason No. 16?
This Gleason No. 16 Hypoid & Spiral Bevel Gear Generator includes 3 units of the same machine.
What type of machine is this Gleason No. 19?
This Gleason No. 19 is a Hypoid Lapper.
What is the function of this Gleason No. 453?
This Gleason No. 453 is a Hypoid Cutter Sharpening Machine.
Are all machines currently in working condition?
All machines are in working condition and were moved from the workshop to the warehouse when production stopped.
What is the range of diameters for the working heads included?
This equipment includes 35 working heads with diameters between 60 and 315 mm.
How many spare knives are included in this set?
This set includes 444 spare knives.
How many interchangeable gears are available for the Gleason machines?
There are a total of 299 interchangeable gears belonging to the Gleason machines.
What specifications do the 36 gears in this equipment have?
This equipment includes 36 gears with 6 grooves, module 2, straight teeth.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing offers multiple Gleason gear shaping and finishing machines, including three Gleason No. 16 Hypoid & Spiral Bevel Gear Generators, one Gleason No. 19 Hypoid Lapper, and one Gleason No. 453 Hypoid Cutter Sharpening Machine.
The Gleason No. 16 machines are designed for gear generation and format operations, capable of cutting both crown-wheel and pinion gears. They come equipped with hydraulic clamping, 263 change gears covering 1.5 and 2 modules, and clamping devices. Each unit also includes a cutter body.
The Gleason No. 19 Hypoid Lapper supports gear diameters up to 432 mm (17 inches) and has spindle distances and offsets allowing precise lapping operations. It can also be used as a tester. The maximum drive spindle speed is 1200 rpm. The maximum gear diameter can be increased with special lapping guards.
The Gleason No. 453 Hypoid Cutter Sharpening Machine accommodates spiral bevel cutters ranging from 89 mm to 457 mm (3.5 to 18 inches) in diameter, revacycle cutters of 406 mm and 457 mm (16 and 18 inches), and Coniflex cutters of 229 mm and 381 mm (9 and 15 inches). It removes stock at rates of 0.007 inches (0.18 mm) per roughing cycle and 0.002 inches (0.05 mm) per finishing cycle, with a grinding time of approximately 5 seconds per blade. The machine uses a 12-inch by 0.75-inch (305 mm by 19 mm) disc-type 30-degree bevel grinding wheel with a 4-inch (101.6 mm) bore diameter.
All machines bear the Gleason brand and show signs of use, including some dirt, wear, and minor rust patches, but appear structurally intact. Visible handwheel controls and protective covers with the Gleason branding are present. The machines are situated in a workshop environment with overhead lighting and industrial shelving. Several gear shaping tools and parts are stored nearby on racks and pallets. A cloth or rag is placed near the spindle area on one of the machines. The floor around the machines is generally clean with some scattered debris.
Please note that while the machines appear complete and structurally sound, no specific information regarding testing, operational status, or refurbishment is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2024 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |
Зъбоформаща машина Gleason No. 16 (3 units), No. 19 and No.453
Obrážecí stroj na ozubení Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 (3 units), No. 19 and No.453 Gear forme maskine
Gleason No. 16 (3 units), No. 19 and No.453 Zahnrad-Wälzstoßmaschine
Μηχάνημα διαμόρφωσης γραναζιών Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 Hypoid & Spiral Bevel Gear Generator (3 x No.16 same machines), Gleason No.19 Hypoid Lapper, Gleason No. 453 Hypoid Cutter Sharpening Machine / All together 5 machines
Talladora de engranajes Gleason No. 16 (3 units), No. 19 and No.453
Tailleuse par outil pignon Gleason No. 16 (3 units), No. 19 and No.453
Stroj za oblikovanje zupčanika Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 (3 units), No. 19 and No.453 Fogaskerék alakító gép
Dentatrice-stozzatrice Gleason No. 16 (3 units), No. 19 and No.453
Pavarų formavimo mašina Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 (3 units), No. 19 and No.453 Machine voor het vormen van tandwielen
Dłutownica Gleason No. 16 (3 units), No. 19 and No.453
Máquina modeladora de engrenagens Gleason No. 16 (3 units), No. 19 and No.453
Mașină de modelat angrenaje Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 (3 units), No. 19 and No.453 Зубодолбёжный станок
Mašina za oblikovanje zupčanika Gleason No. 16 (3 units), No. 19 and No.453
Gleason No. 16 (3 units), No. 19 and No.453 Kugghjulsformningsmaskin
Dişli şekillendirme makinesi Gleason No. 16 (3 units), No. 19 and No.453
EN
- Languages
English (GB)