Contact us to receive an offer.
| Manufacturer | Gleason |
|---|---|
| Model | 515 |
| Year | |
| Location | Italy
|
| Category | Gears - Other gear machines (milling, testing, inspection, etc.) |
| Max wheel Ø | 609 mm |
| CNC | No |
| Type of CNC | |
| Weight | 4500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 10/09/2025 |
| Product id | P210302042 |
| Language |
Gleason 515
Ozubená frézka Gleason 515
Gleason 515
Gleason 515 Zahnradfräsmaschine
Gleason 515
Gleason 515 Gear milling machine
Freadora de engranajes Gleason 515
Machine d'engrenage Gleason 515
Gleason 515
Gleason 515
Fresatrice ad ingranaggi Gleason 515
Gleason 515
Gleason 515
Frezarka do kół zębatych Gleason 515
Gleason 515
Gleason 515
Gleason 515 Зубообрабатывающий станок
Gleason 515
Gleason 515
Dişli freze tezgahı Gleason 515
|
The Gleason Model 515 Hypoid Tester is a robust industrial machine designed for the testing of hypoid gears. It accommodates a maximum gear diameter of 609 mm (24 inches) and a maximum pinion diameter of 304 mm (12 inches). The machine allows for an offset of the gear spindle above or below the center of the pinion spindle up to 152 mm (6 inches), and it supports a range of shaft angles from 0 to 180 degrees. This equipment weighs approximately 4500 kg, indicating its substantial build suitable for heavy-duty gear testing tasks.
The machine is painted in green and features several key components, including a motor mounted on the right side and a control box. Multiple hoses and cables are connected to the unit, suggesting hydraulic and electrical connections necessary for its operation. Red lifting straps are draped over the machine, likely for handling and transportation purposes. The surface of the machine shows signs of wear and rust in some areas, which is common for used industrial equipment and should be considered when evaluating its condition.
The nameplate on the machine clearly identifies it as the "GLEASON NO. 515 HYPOID TESTER" with a serial number 631506, and it was manufactured in Rochester, N.Y., U.S.A. An additional plate indicates involvement by Alfred Wentzky & Co in Stuttgart. There are also visible warning and instruction stickers on the machine's surface, which are important for safe operation.
Please note that this model is not CNC controlled, as specified. Overall, the Gleason 515 Hypoid Tester is a specialized machine suitable for precise gear testing applications within industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
MODEL 515 GLEASON HYDRAULIC HYPOID TESTER
Capacity
Max gera diameter 609 mm (24").
Max Pinio Diameter 304 mm (12")
Offset of gear Spindle above or below centre of pinion spndle 152 mm (6")
Range of Shaft Angles 0 - 180
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 33 |
| Last activity | Nov. 9, 2026 |
MODEL 515 GLEASON HYDRAULIC HYPOID TESTER
Capacity
Max gera diameter 609 mm (24").
Max Pinio Diameter 304 mm (12")
Offset of gear Spindle above or below centre of pinion spndle 152 mm (6")
Range of Shaft Angles 0 - 180
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Gears - Other gear machines (milling, testing, inspection, etc.) |
| Max wheel Ø | 609 mm |
| CNC | No |
| Type of CNC | |
| Weight | 4500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 10/09/2025 |
| Product id | P210302042 |
| Language |
Gleason 515
Ozubená frézka Gleason 515
Gleason 515
Gleason 515 Zahnradfräsmaschine
Gleason 515
Gleason 515 Gear milling machine
Freadora de engranajes Gleason 515
Machine d'engrenage Gleason 515
Gleason 515
Gleason 515
Fresatrice ad ingranaggi Gleason 515
Gleason 515
Gleason 515
Frezarka do kół zębatych Gleason 515
Gleason 515
Gleason 515
Gleason 515 Зубообрабатывающий станок
Gleason 515
Gleason 515
Dişli freze tezgahı Gleason 515
|
The Gleason Model 515 Hypoid Tester is a robust industrial machine designed for the testing of hypoid gears. It accommodates a maximum gear diameter of 609 mm (24 inches) and a maximum pinion diameter of 304 mm (12 inches). The machine allows for an offset of the gear spindle above or below the center of the pinion spindle up to 152 mm (6 inches), and it supports a range of shaft angles from 0 to 180 degrees. This equipment weighs approximately 4500 kg, indicating its substantial build suitable for heavy-duty gear testing tasks.
The machine is painted in green and features several key components, including a motor mounted on the right side and a control box. Multiple hoses and cables are connected to the unit, suggesting hydraulic and electrical connections necessary for its operation. Red lifting straps are draped over the machine, likely for handling and transportation purposes. The surface of the machine shows signs of wear and rust in some areas, which is common for used industrial equipment and should be considered when evaluating its condition.
The nameplate on the machine clearly identifies it as the "GLEASON NO. 515 HYPOID TESTER" with a serial number 631506, and it was manufactured in Rochester, N.Y., U.S.A. An additional plate indicates involvement by Alfred Wentzky & Co in Stuttgart. There are also visible warning and instruction stickers on the machine's surface, which are important for safe operation.
Please note that this model is not CNC controlled, as specified. Overall, the Gleason 515 Hypoid Tester is a specialized machine suitable for precise gear testing applications within industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 33 |
| Last activity | Nov. 9, 2026 |
EN
- Languages
English (GB)