| Manufacturer | Gigant |
|---|---|
| Model | G2-500 |
| Year | 2007 |
| Location | Italy
|
| Category | Miscellaneous presses and forging machines |
| Force | 500 T |
| Stroke length | 1300 mm |
| Table length | 2000 mm |
| Table width | 2000 mm |
| Engine Power | 55 kW |
| Weight | 48000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Gigant G2-500 |
| Last availability date | 03/02/2026 |
| Product id | P260128083 |
| Language |
Преса Gigant G2-500 преса
Lis Gigant G2-500
Tryk Gigant G2-500 tryk
Presse Gigant G2-500 Presse
Πρέσα Gigant G2-500 πρέσα
Press Gigant G2-500 press
Prensa Gigant G2-500
Presse Gigant G2-500
Preša Gigant G2-500
Prés Gigant G2-500 prés
Pressa Gigant G2-500 press
Spaudimo presas Gigant G2-500
Pers Gigant G2-500 pers
Prasa Gigant G2-500
Prensa Gigant G2-500
Presă Presă Gigant G2-500
Пресс Gigant G2-500
Presa Gigant G2-500
Pressa Gigant G2-500 press
Gigant G2-500 pres
|
This listing features a Gigant G2-500 industrial press machine, manufactured in 2007. It has a pressing capacity of 500 tons and is equipped with a stroke length of 1,300 mm. The press table measures 2,000 mm by 2,000 mm, providing a substantial working surface. The machine's total weight is approximately 48,000 kg.
The press includes a hydraulic lower presser system with four cylinders and a presser stroke of 650 mm, covering a presser surface area of 1,700 mm by 1,700 mm. The front clearance between uprights is 2,010 mm, with a vertical clearance between open tables of 2,200 mm and a side clearance of 920 mm. The approach and return speeds are both 500 mm/sec. The total installed electrical power is 55 kW, consistent with the engine power rating.
From a safety and operational standpoint, the machine is fitted with several protective features. A red safety guard is positioned above the press table area, complemented by a red safety mesh guard behind the table and on the machine's side. These guards contribute to operator safety during use. An emergency stop button is installed on the side of the machine for quick shutdown if needed. Additionally, a metal cage ladder with a safety cage is attached to the side, allowing safe access to upper components.
The machine's hydraulic system includes visible cylinders, hoses, and fittings that appear intact with no visible leaks or damage. Two pressure gauges manufactured by Tecsis are present, indicating maximum piston pressure of 295 bar and maximum lamination pressure of 260 bar.
The press is housed indoors within an industrial workshop environment and appears clean and well-maintained, with some plastic covering on the table surface. The structure of the machine is stable and intact, painted predominantly in blue with red safety elements and orange safety doors. Ventilation panels are integrated into the frame.
This Gigant G2-500 press is a robust and sizable machine suitable for heavy-duty pressing applications, offering comprehensive safety features and solid construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Brand: Gigant
Model: G2-500
Capacity: 500 tons
Stroke: 1,300 mm
Table: 2,000 x 2,000 mm
Hammer: 2,000 x 2,000 mm
Front clearance between uprights: 2,010 mm
Vertical clearance between open tables: 2,200 mm
Side clearance: 920 mm
Approach speed: 500 mm/sec
Return speed: 500 mm/sec
Hydraulic lower presser: 4 cylinders
Presser stroke: 650 mm
Presser surface: 1,700 x 1,700 mm
Total installed electrical power: 55 + 55 + 8 kW
Power supply voltage: 400 / 50 Volts / Hz
Weight: 48,000 kg
Year: 2007
Technical condition: as seen, where located
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Oct. 26, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
Brand: Gigant
Model: G2-500
Capacity: 500 tons
Stroke: 1,300 mm
Table: 2,000 x 2,000 mm
Hammer: 2,000 x 2,000 mm
Front clearance between uprights: 2,010 mm
Vertical clearance between open tables: 2,200 mm
Side clearance: 920 mm
Approach speed: 500 mm/sec
Return speed: 500 mm/sec
Hydraulic lower presser: 4 cylinders
Presser stroke: 650 mm
Presser surface: 1,700 x 1,700 mm
Total installed electrical power: 55 + 55 + 8 kW
Power supply voltage: 400 / 50 Volts / Hz
Weight: 48,000 kg
Year: 2007
Technical condition: as seen, where located
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Miscellaneous presses and forging machines |
| Force | 500 T |
| Stroke length | 1300 mm |
| Table length | 2000 mm |
| Table width | 2000 mm |
| Engine Power | 55 kW |
| Weight | 48000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Gigant G2-500 |
| Last availability date | 03/02/2026 |
| Product id | P260128083 |
| Language |
Преса Gigant G2-500 преса
Lis Gigant G2-500
Tryk Gigant G2-500 tryk
Presse Gigant G2-500 Presse
Πρέσα Gigant G2-500 πρέσα
Press Gigant G2-500 press
Prensa Gigant G2-500
Presse Gigant G2-500
Preša Gigant G2-500
Prés Gigant G2-500 prés
Pressa Gigant G2-500 press
Spaudimo presas Gigant G2-500
Pers Gigant G2-500 pers
Prasa Gigant G2-500
Prensa Gigant G2-500
Presă Presă Gigant G2-500
Пресс Gigant G2-500
Presa Gigant G2-500
Pressa Gigant G2-500 press
Gigant G2-500 pres
|
This listing features a Gigant G2-500 industrial press machine, manufactured in 2007. It has a pressing capacity of 500 tons and is equipped with a stroke length of 1,300 mm. The press table measures 2,000 mm by 2,000 mm, providing a substantial working surface. The machine's total weight is approximately 48,000 kg.
The press includes a hydraulic lower presser system with four cylinders and a presser stroke of 650 mm, covering a presser surface area of 1,700 mm by 1,700 mm. The front clearance between uprights is 2,010 mm, with a vertical clearance between open tables of 2,200 mm and a side clearance of 920 mm. The approach and return speeds are both 500 mm/sec. The total installed electrical power is 55 kW, consistent with the engine power rating.
From a safety and operational standpoint, the machine is fitted with several protective features. A red safety guard is positioned above the press table area, complemented by a red safety mesh guard behind the table and on the machine's side. These guards contribute to operator safety during use. An emergency stop button is installed on the side of the machine for quick shutdown if needed. Additionally, a metal cage ladder with a safety cage is attached to the side, allowing safe access to upper components.
The machine's hydraulic system includes visible cylinders, hoses, and fittings that appear intact with no visible leaks or damage. Two pressure gauges manufactured by Tecsis are present, indicating maximum piston pressure of 295 bar and maximum lamination pressure of 260 bar.
The press is housed indoors within an industrial workshop environment and appears clean and well-maintained, with some plastic covering on the table surface. The structure of the machine is stable and intact, painted predominantly in blue with red safety elements and orange safety doors. Ventilation panels are integrated into the frame.
This Gigant G2-500 press is a robust and sizable machine suitable for heavy-duty pressing applications, offering comprehensive safety features and solid construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Oct. 26, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
EN
- Languages
English (GB)