| Manufacturer | Future Tech |
|---|---|
| Model | UW95/44 |
| Year | 2023 |
| Location | Poland
|
| Category | Complete lines - Plastic extrusion |
| Screw diameter | 95 mm |
| Output | 1000 kg/h |
| Type | Twin screw |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 10/09/2026 |
| Product id | P230529066 |
| Language |
Future Tech UW95/44
Vytlačovací linka Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44 Extrusionsanlage
Future Tech UW95/44
Future Tech Twin Screw PET / PP / PS UW95/44
Línea de extrusión Future Tech UW95/44
Ligne d'extrusion Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Linea di estrusione Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Linia do wytłaczania Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44 Экструзионная линия
Future Tech UW95/44
Future Tech UW95/44
Ekstrüzyon hattı Future Tech UW95/44
|
This listing features a complete plastic extrusion line manufactured by Future Tech, model UW95/44, produced in 2023. It is a twin screw extrusion system designed for processing PET, PP, and PS materials, including virgin and recycled flakes. The main extruder has a screw diameter of 95 mm and is water cooled, delivering an output capacity of up to 1000 kg per hour. The co-extruder is a 65 mm single screw unit equipped with a 30 kW brushless motor and inverter for precise speed control.
The extrusion line supports material thickness ranging from 0.18 mm to 1.2 mm and can handle a maximum sheet width of 1100 mm. It includes a 2-component volumetric mixing system for feeding the primary and secondary extruders, allowing processing of mixtures of virgin flakes, post-consumer bottle flakes, and skeletal flakes.
Key features include a hydraulic screen changer with two pistons and a filter diameter of 180 mm, a JCTimes model 275 gear pump with brushless motor and PLC control, and a triple venting system with a liquid ring vacuum pump. The feed block offers flexible configurations (A-B-A, A-B, B) with adjustable component ratios.
The sheet die is a 1230 mm wide flex lip single manifold design, with manual T-die adjustment and a maximum net sheet width of 1100 mm. The downstream equipment includes a 1400 mm wide three-roll polishing stack with individual actuators and a 3-zone pumping group, an 1100 mm wide silicone application and drying unit with four rolls, and an 1100 mm wide winding system with accumulator supporting 3" and 6" cores. Maximum roll weight is 1200 kg, with a maximum roll diameter of 1000 mm.
The machinery is housed in a robust blue and yellow painted metal framework. Visual inspection shows the equipment is clean and well-maintained, with some components still protected by plastic wrapping, suggesting minimal prior use. Multiple extrusion machines and processing stations are arranged in a factory setting with yellow safety rails and blue structural supports. Two large silver hoppers are mounted on top for material feeding. Additional accessories visible include a pallet with metal parts and a fire extinguisher near the machine base.
Payment terms require 20% with order and full balance before loading. This extrusion line is suitable for manufacturers seeking a high-capacity, versatile system for producing plastic sheets from various materials.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Producer.
Model: Twin Screw PET / PP / PS Extrusion Line
Condition.
Availability.
Materials: PET / PP / PS (virgin and recycled flake)
Material width range: 0,18 mm - 1,2 mm
Maximum sheet width: 1100 mm
Output: 1000 kg/hr
Main extruder: 95mm Future Tech UV95 twin screw water cooled extruder
Co-Extruder: 65mm Future tech single screw with 30kW brushless motor and inverter
Operation from 0.18mm to 1.2mm thick PET up to 1000kg/h.
Mixture of virgin flakes, post-consumer bottle flakes and skeletal flakes.
2-component volumetric mixing system for primary and secondary extruders.
95mm Future Tech UW95/44 twin screw water cooled extruder.
250kW AC motor with inverter drive.
Triple venting with liquid ring vacuum pump system.
Hydraulic screen changer, two piston, filter diameter Φ180mm, manual operation.
JCTimes model 275 gear pump with brushless motor and PLC control.
65mm Future Tech single screw coextruder with 30kW brushless motor and inverter.
Vented by a liquid ring vacuum pump system. Manual screen changer. JCTimes melt pump model
with brushless motor and inverter speed control.
A-B-A, A-B, B (A=10-15%, B=85-90%) feed block with selector plug.
1230 mm wide flex lip single manifold sheet die.
Maximum net sheet width is 1100 mm.
Manual T-die. Flex bottom lip. Fixed upper lip. Close access.
1400 mm wide three roll polishing stack with horizontal configuration (350 mm x 650 mm x
650 mm diameter). Individual actuators. 3-zone pumping group.
1100 mm wide silicone application and drying unit. 4 rolls 200 mm diameter.
1100 mm wide winding system with accumulator. 4 positions. 3" and 6" cores.
Maximum roll weight 1200 kg. Maximum roll diameter 1000 mm.
Payment terms: 20% with order and full balance before loading.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What dispensers are included with this Future Tech UW95/44?
This Future Tech UW95/44 extrusion line is equipped with dispensers licensed by the German company Koch.
What type of dryer does this model have?
This Future Tech UW95/44 extrusion line features a dryer that can crystallize PET.
How many vacuum pump systems are in this extrusion line?
This Future Tech UW95/44 extrusion line has degassing capabilities in three sections with two vacuum pump systems.
Is there a battery included in this model?
This Future Tech UW95/44 extrusion line includes a battery installed between the main and auxiliary exhaust.
How many stations for foil winding does this machine have?
This Future Tech UW95/44 extrusion line has four independently controlled stations for foil winding devices.
What is the estimated capacity for PP of this extrusion line?
This Future Tech UW95/44 extrusion line has a capacity for PP estimated at approximately 650-700 kg/h, considering a 30% reduction due to lower specific gravity.
What is the intended use of this Future Tech UW95/44?
This Future Tech UW95/44 extrusion line was ordered for PET film production.
Has this model undergone any test launches?
This Future Tech UW95/44 extrusion line has undergone test launches.
What materials can this Future Tech UW95/44 process?
This Future Tech UW95/44 is a Twin Screw line designed for processing PET, PP, and PS materials.
When was this Future Tech UW95/44 manufactured?
This Future Tech UW95/44 was manufactured in the year 2023.
Has this line been used before?
The line has never been used.
When was this Future Tech UW95/44 Extrusionsanlage built?
This Future Tech UW95/44 Extrusionsanlage was built in 2023.
What category is this Future Tech UW95/44 Extrusionsanlage?
This Future Tech UW95/44 Extrusionsanlage is an extrusion line.
Has this equipment been inspected by the buyer?
This equipment has not been inspected by the buyer.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 2 |
| Last activity | Oct. 31, 2026 |
Producer.
Model: Twin Screw PET / PP / PS Extrusion Line
Condition.
Availability.
Materials: PET / PP / PS (virgin and recycled flake)
Material width range: 0,18 mm - 1,2 mm
Maximum sheet width: 1100 mm
Output: 1000 kg/hr
Main extruder: 95mm Future Tech UV95 twin screw water cooled extruder
Co-Extruder: 65mm Future tech single screw with 30kW brushless motor and inverter
Operation from 0.18mm to 1.2mm thick PET up to 1000kg/h.
Mixture of virgin flakes, post-consumer bottle flakes and skeletal flakes.
2-component volumetric mixing system for primary and secondary extruders.
95mm Future Tech UW95/44 twin screw water cooled extruder.
250kW AC motor with inverter drive.
Triple venting with liquid ring vacuum pump system.
Hydraulic screen changer, two piston, filter diameter Φ180mm, manual operation.
JCTimes model 275 gear pump with brushless motor and PLC control.
65mm Future Tech single screw coextruder with 30kW brushless motor and inverter.
Vented by a liquid ring vacuum pump system. Manual screen changer. JCTimes melt pump model
with brushless motor and inverter speed control.
A-B-A, A-B, B (A=10-15%, B=85-90%) feed block with selector plug.
1230 mm wide flex lip single manifold sheet die.
Maximum net sheet width is 1100 mm.
Manual T-die. Flex bottom lip. Fixed upper lip. Close access.
1400 mm wide three roll polishing stack with horizontal configuration (350 mm x 650 mm x
650 mm diameter). Individual actuators. 3-zone pumping group.
1100 mm wide silicone application and drying unit. 4 rolls 200 mm diameter.
1100 mm wide winding system with accumulator. 4 positions. 3" and 6" cores.
Maximum roll weight 1200 kg. Maximum roll diameter 1000 mm.
Payment terms: 20% with order and full balance before loading.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What dispensers are included with this Future Tech UW95/44?
This Future Tech UW95/44 extrusion line is equipped with dispensers licensed by the German company Koch.
What type of dryer does this model have?
This Future Tech UW95/44 extrusion line features a dryer that can crystallize PET.
How many vacuum pump systems are in this extrusion line?
This Future Tech UW95/44 extrusion line has degassing capabilities in three sections with two vacuum pump systems.
Is there a battery included in this model?
This Future Tech UW95/44 extrusion line includes a battery installed between the main and auxiliary exhaust.
How many stations for foil winding does this machine have?
This Future Tech UW95/44 extrusion line has four independently controlled stations for foil winding devices.
What is the estimated capacity for PP of this extrusion line?
This Future Tech UW95/44 extrusion line has a capacity for PP estimated at approximately 650-700 kg/h, considering a 30% reduction due to lower specific gravity.
What is the intended use of this Future Tech UW95/44?
This Future Tech UW95/44 extrusion line was ordered for PET film production.
Has this model undergone any test launches?
This Future Tech UW95/44 extrusion line has undergone test launches.
What materials can this Future Tech UW95/44 process?
This Future Tech UW95/44 is a Twin Screw line designed for processing PET, PP, and PS materials.
When was this Future Tech UW95/44 manufactured?
This Future Tech UW95/44 was manufactured in the year 2023.
Has this line been used before?
The line has never been used.
When was this Future Tech UW95/44 Extrusionsanlage built?
This Future Tech UW95/44 Extrusionsanlage was built in 2023.
What category is this Future Tech UW95/44 Extrusionsanlage?
This Future Tech UW95/44 Extrusionsanlage is an extrusion line.
Has this equipment been inspected by the buyer?
This equipment has not been inspected by the buyer.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Complete lines - Plastic extrusion |
| Screw diameter | 95 mm |
| Output | 1000 kg/h |
| Type | Twin screw |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 10/09/2026 |
| Product id | P230529066 |
| Language |
Future Tech UW95/44
Vytlačovací linka Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44 Extrusionsanlage
Future Tech UW95/44
Future Tech Twin Screw PET / PP / PS UW95/44
Línea de extrusión Future Tech UW95/44
Ligne d'extrusion Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Linea di estrusione Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Linia do wytłaczania Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44
Future Tech UW95/44 Экструзионная линия
Future Tech UW95/44
Future Tech UW95/44
Ekstrüzyon hattı Future Tech UW95/44
|
This listing features a complete plastic extrusion line manufactured by Future Tech, model UW95/44, produced in 2023. It is a twin screw extrusion system designed for processing PET, PP, and PS materials, including virgin and recycled flakes. The main extruder has a screw diameter of 95 mm and is water cooled, delivering an output capacity of up to 1000 kg per hour. The co-extruder is a 65 mm single screw unit equipped with a 30 kW brushless motor and inverter for precise speed control.
The extrusion line supports material thickness ranging from 0.18 mm to 1.2 mm and can handle a maximum sheet width of 1100 mm. It includes a 2-component volumetric mixing system for feeding the primary and secondary extruders, allowing processing of mixtures of virgin flakes, post-consumer bottle flakes, and skeletal flakes.
Key features include a hydraulic screen changer with two pistons and a filter diameter of 180 mm, a JCTimes model 275 gear pump with brushless motor and PLC control, and a triple venting system with a liquid ring vacuum pump. The feed block offers flexible configurations (A-B-A, A-B, B) with adjustable component ratios.
The sheet die is a 1230 mm wide flex lip single manifold design, with manual T-die adjustment and a maximum net sheet width of 1100 mm. The downstream equipment includes a 1400 mm wide three-roll polishing stack with individual actuators and a 3-zone pumping group, an 1100 mm wide silicone application and drying unit with four rolls, and an 1100 mm wide winding system with accumulator supporting 3" and 6" cores. Maximum roll weight is 1200 kg, with a maximum roll diameter of 1000 mm.
The machinery is housed in a robust blue and yellow painted metal framework. Visual inspection shows the equipment is clean and well-maintained, with some components still protected by plastic wrapping, suggesting minimal prior use. Multiple extrusion machines and processing stations are arranged in a factory setting with yellow safety rails and blue structural supports. Two large silver hoppers are mounted on top for material feeding. Additional accessories visible include a pallet with metal parts and a fire extinguisher near the machine base.
Payment terms require 20% with order and full balance before loading. This extrusion line is suitable for manufacturers seeking a high-capacity, versatile system for producing plastic sheets from various materials.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 2 |
| Last activity | Oct. 31, 2026 |
EN
- Languages
English (GB)