| Manufacturer | Fuji |
|---|---|
| Model | SFAB-D |
| Year | 2017 |
| Location | Canada
|
| Category | PCB - Miscellaneous |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 16/10/2026 |
| Product id | P240619289 |
| Language |
PCB машина Fuji SFAB-D
PCB Stroj Fuji SFAB-D
Fuji SFAB-D PCB maskine
Fuji SFAB-D Sondere Leitterplatte Maschine
Μηχανή PCB Fuji SFAB-D
FUJI SFAB-D Odd Form Placer
Máquina de circuito impreso Fuji SFAB-D
Machine de fabrication et assemblage de circuits imprimés Fuji SFAB-D
PCB stroj Fuji SFAB-D
Fuji SFAB-D PCB gép
Macchina di fabricazione ed assemblaggio di circuiti stampati Fuji SFAB-D
PCB mašina Fuji SFAB-D
Fuji SFAB-D PCB-machine
Maszyna do obwodów drukowanych Fuji SFAB-D
Máquina PCB Fuji SFAB-D
Mașină PCB Fuji SFAB-D
Fuji SFAB-D Оборудование для печатных плат
PCB mašina Fuji SFAB-D
Fuji SFAB-D PCB maskin
Baskı Devre Kartı Makinası Fuji SFAB-D
|
This listing is for a 2017 Fuji SFAB-D Odd Form Placer, a machine designed for precise placement of odd-shaped electronic components on printed circuit boards (PCBs). The unit is powered by a 3-phase AC supply with a voltage range of 200-230V, drawing a full load current of 50A, and operates at both 50 and 60Hz frequencies. It accommodates a clamp width ranging from 0.5 to 47mm and can handle parts up to 65mm in height, including leads. The machine is compatible with the sH02 head for component placement.
The Fuji SFAB-D comes with multiple kit options tailored to various part sizes and weights, including starter tool kits for light and small parts as well as full sets for light, small, and large parts. The machine features six component feeder slots, facilitating efficient handling of multiple components during operation.
The control panel includes a display screen and several control buttons such as READY ON, START, CYCLE STOP, and ENABLE LOCK, along with an emergency stop button for safety. The display screen shows system status messages and the Fuji logo. The machine is mounted on caster wheels, allowing for easy mobility within a production environment.
Physically, the unit has a blue and grey color scheme with the model label 'SFAB-D' clearly visible. Protective plastic film partially covers the front and top surfaces, indicating care in handling. Some minor scuff marks are present on the side panel. Internal views reveal guide rails, component holders, and various pneumatic and electrical components, highlighting the machine's complex build.
Additional features include a meter labeled 'Omron H7ET' and an Earth Bonding Point sticker, ensuring compliance with safety standards. Maintenance or work logs are attached to the machine's side, suggesting documented upkeep.
This Fuji SFAB-D Odd Form Placer is suitable for manufacturers requiring reliable odd-form component placement with flexibility in part sizes and configurations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
2017 Fuji sFAB-D Odd Form Placer
ONLY 930.00 Hours.
IN LIKE NEW CONDITION
Daily Maintenance performed while under operation
Applicable head(s): sH02 head
Clamp width: 0.5 to 47mm
Supply Voltage: AC 200-230V
Full Load Amp: 50A
Freq: 50/60Hz
Phase: 3
December 2017 MFR Date
Part height: 65mm or less (including leads)
Kit types5 types:
Starter tool kit for light parts
Starter tool kit for small parts
Full set for light parts
Full set for small parts
Full set for large parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Fuji sFAB-D odd-form inserter manufactured?
This Fuji sFAB-D odd-form inserter was manufactured in 2017.
How many operating hours does the machine have?
This machine has a total of 8000 hours of operation.
What features does this Fuji sFAB-D odd-form inserter include?
This Fuji sFAB-D odd-form inserter includes a cut and clinch unit located underneath the conveyors.
Are all visible accessories included with the equipment?
This equipment includes all visible accessories as shown in the posting pictures.
Was this Fuji sFAB-D odd-form inserter used in production?
This Fuji sFAB-D odd-form inserter was mainly used as a demo unit and was not put into production due to a cancelled project.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| fuji-sfab-d-p240619289_10.xlsx | Download |
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Oct. 16, 2026 |
2017 Fuji sFAB-D Odd Form Placer
ONLY 930.00 Hours.
IN LIKE NEW CONDITION
Daily Maintenance performed while under operation
Applicable head(s): sH02 head
Clamp width: 0.5 to 47mm
Supply Voltage: AC 200-230V
Full Load Amp: 50A
Freq: 50/60Hz
Phase: 3
December 2017 MFR Date
Part height: 65mm or less (including leads)
Kit types5 types:
Starter tool kit for light parts
Starter tool kit for small parts
Full set for light parts
Full set for small parts
Full set for large parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Fuji sFAB-D odd-form inserter manufactured?
This Fuji sFAB-D odd-form inserter was manufactured in 2017.
How many operating hours does the machine have?
This machine has a total of 8000 hours of operation.
What features does this Fuji sFAB-D odd-form inserter include?
This Fuji sFAB-D odd-form inserter includes a cut and clinch unit located underneath the conveyors.
Are all visible accessories included with the equipment?
This equipment includes all visible accessories as shown in the posting pictures.
Was this Fuji sFAB-D odd-form inserter used in production?
This Fuji sFAB-D odd-form inserter was mainly used as a demo unit and was not put into production due to a cancelled project.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | PCB - Miscellaneous |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 16/10/2026 |
| Product id | P240619289 |
| Language |
PCB машина Fuji SFAB-D
PCB Stroj Fuji SFAB-D
Fuji SFAB-D PCB maskine
Fuji SFAB-D Sondere Leitterplatte Maschine
Μηχανή PCB Fuji SFAB-D
FUJI SFAB-D Odd Form Placer
Máquina de circuito impreso Fuji SFAB-D
Machine de fabrication et assemblage de circuits imprimés Fuji SFAB-D
PCB stroj Fuji SFAB-D
Fuji SFAB-D PCB gép
Macchina di fabricazione ed assemblaggio di circuiti stampati Fuji SFAB-D
PCB mašina Fuji SFAB-D
Fuji SFAB-D PCB-machine
Maszyna do obwodów drukowanych Fuji SFAB-D
Máquina PCB Fuji SFAB-D
Mașină PCB Fuji SFAB-D
Fuji SFAB-D Оборудование для печатных плат
PCB mašina Fuji SFAB-D
Fuji SFAB-D PCB maskin
Baskı Devre Kartı Makinası Fuji SFAB-D
|
This listing is for a 2017 Fuji SFAB-D Odd Form Placer, a machine designed for precise placement of odd-shaped electronic components on printed circuit boards (PCBs). The unit is powered by a 3-phase AC supply with a voltage range of 200-230V, drawing a full load current of 50A, and operates at both 50 and 60Hz frequencies. It accommodates a clamp width ranging from 0.5 to 47mm and can handle parts up to 65mm in height, including leads. The machine is compatible with the sH02 head for component placement.
The Fuji SFAB-D comes with multiple kit options tailored to various part sizes and weights, including starter tool kits for light and small parts as well as full sets for light, small, and large parts. The machine features six component feeder slots, facilitating efficient handling of multiple components during operation.
The control panel includes a display screen and several control buttons such as READY ON, START, CYCLE STOP, and ENABLE LOCK, along with an emergency stop button for safety. The display screen shows system status messages and the Fuji logo. The machine is mounted on caster wheels, allowing for easy mobility within a production environment.
Physically, the unit has a blue and grey color scheme with the model label 'SFAB-D' clearly visible. Protective plastic film partially covers the front and top surfaces, indicating care in handling. Some minor scuff marks are present on the side panel. Internal views reveal guide rails, component holders, and various pneumatic and electrical components, highlighting the machine's complex build.
Additional features include a meter labeled 'Omron H7ET' and an Earth Bonding Point sticker, ensuring compliance with safety standards. Maintenance or work logs are attached to the machine's side, suggesting documented upkeep.
This Fuji SFAB-D Odd Form Placer is suitable for manufacturers requiring reliable odd-form component placement with flexibility in part sizes and configurations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Oct. 16, 2026 |
EN
- Languages
English (GB)