| Manufacturer | FORMLABS |
|---|---|
| Model | Fuse 1 |
| Year | 2021 |
| Location | Austria
|
The FORMLABS Fuse 1 is a plastic 3D printer manufactured in 2021, designed for high-quality additive manufacturing using PA12 nylon powder. It features a build volume of 165 x 165 x 300 mm, allowing for the production of parts up to 15.9 x 15.9 x 29.5 cm in size. The machine operates with a Ytterbium Fiber laser, delivering a maximum laser power of 10 watts and a laser spot size of 200 microns, enabling detailed and precise printing with a layer thickness of 110 microns. The build speed is approximately 10 mm per hour. The printer includes a hopper capacity of 8.5 kg for PA12 nylon powder, supporting efficient material handling.
The Fuse 1 measures 685 mm in length, 645 mm in width, and 1065 mm in height, with a total weight of 114 kg. It has three axes, with an X-axis travel of 165 mm. The machine is equipped with a touchscreen control panel (10.1 inch, 1280 x 800 resolution) and supports connectivity via WiFi (2.4 GHz), Ethernet (1000 Mbit), and USB 2.0.
Visible components include an internal compartment accessible via a door, which contains a removable container secured by a strap and a blue handle lever. The door features a rubber sealing gasket around its perimeter. The interior surfaces show signs of use with some dust and wear marks, indicating prior operation. The exterior is clean and well-maintained with black and grey panels, an orange tinted window on the upper right side, and Formlabs branding on the front and side panels. The machine is currently placed on a wooden pallet with no visible damage.
An air filtration system is accessible through an open side door, revealing a mesh filter secured by metal clips and a blue pull handle labeled "Pull To Open Door." This system is designed for pressure-controlled two-stage filtration including HEPA and carbon filters, ensuring safe operation and air quality.
The Fuse 1 requires power inputs of EU 230 VAC 7.5 A or US 120 VAC 15 A. The printer's internal temperature is maintained at 200 degrees Celsius using quartz tube heating elements and PTC cartridges. Operating environment recommendations include temperatures between 18 to 28 degrees Celsius with humidity levels not exceeding 30 percent.
Please note, the display is damaged; however, this does not affect the printer's functionality. The machine shows typical signs of use but no major defects are visible. This FORMLABS Fuse 1 is suitable for users seeking reliable and precise 3D printing capabilities in nylon powder-based additive manufacturing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details.Formlabs Fuse 1
Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in
Layer Thickness 110 microns 0.004 in
Build Speed 10 mm per hour 0.39 in per hour
Laser Type Ytterbium Fiber
Laser Spot Size 200 microns 0.0079 in
Material Refresh Rate 30 to 50 percent
Hopper Capacity 8.5 kg PA12 nylon 18.7 lb
Dimensions 685 x 645 x 1065 mm
Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in
Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in
Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand
Weight 114 kg
Startup Time 60 minutes
Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity
Internal Temperature 200 degrees Celsius 392 Fahrenheit
Temperature Control Quartz tube heating elements PTC cartridges
Air Handling pressure controlled two stage filtration HEPA and carbon
Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A
Galvanometers Formlabs custom
Laser Wavelength 1065 nm
Laser Power maximum 10 watts
Beam Divergence 4.01 mrad
Laser Class Class 1
Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0
Touchscreen 10.1 inch 1280 x 800
Control Brand Formlabs
The display is damaged however this does not affect the function
Fuse Sift
OPTIONAL: Fuse Sift price on request
Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8
Fuse Sift Weight 93 kg without build chamber or powder 205 lb
Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in
Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb
Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in
Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb
Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb
Air Filtration Technology replaceable HEPA filter
Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity
Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system
Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit
Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A
Vacuum Requirements auxiliary vacuum with static dissipative grounded components
Sound Emission maximum 76.5 dB
Machine Height: 1065 mm
Machine Length: 685 mm
Machine Weight: 114 kg
Machine Width: 645 mm
Number of Axes: 3
X-axis Travel: 165 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details.Formlabs Fuse 1
Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in
Layer Thickness 110 microns 0.004 in
Build Speed 10 mm per hour 0.39 in per hour
Laser Type Ytterbium Fiber
Laser Spot Size 200 microns 0.0079 in
Material Refresh Rate 30 to 50 percent
Hopper Capacity 8.5 kg PA12 nylon 18.7 lb
Dimensions 685 x 645 x 1065 mm
Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in
Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in
Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand
Weight 114 kg
Startup Time 60 minutes
Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity
Internal Temperature 200 degrees Celsius 392 Fahrenheit
Temperature Control Quartz tube heating elements PTC cartridges
Air Handling pressure controlled two stage filtration HEPA and carbon
Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A
Galvanometers Formlabs custom
Laser Wavelength 1065 nm
Laser Power maximum 10 watts
Beam Divergence 4.01 mrad
Laser Class Class 1
Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0
Touchscreen 10.1 inch 1280 x 800
Control Brand Formlabs
The display is damaged however this does not affect the function
Fuse Sift
OPTIONAL: Fuse Sift price on request
Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8
Fuse Sift Weight 93 kg without build chamber or powder 205 lb
Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in
Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb
Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in
Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb
Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb
Air Filtration Technology replaceable HEPA filter
Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity
Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system
Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit
Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A
Vacuum Requirements auxiliary vacuum with static dissipative grounded components
Sound Emission maximum 76.5 dB
Machine Height: 1065 mm
Machine Length: 685 mm
Machine Weight: 114 kg
Machine Width: 645 mm
Number of Axes: 3
X-axis Travel: 165 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The FORMLABS Fuse 1 is a plastic 3D printer manufactured in 2021, designed for high-quality additive manufacturing using PA12 nylon powder. It features a build volume of 165 x 165 x 300 mm, allowing for the production of parts up to 15.9 x 15.9 x 29.5 cm in size. The machine operates with a Ytterbium Fiber laser, delivering a maximum laser power of 10 watts and a laser spot size of 200 microns, enabling detailed and precise printing with a layer thickness of 110 microns. The build speed is approximately 10 mm per hour. The printer includes a hopper capacity of 8.5 kg for PA12 nylon powder, supporting efficient material handling.
The Fuse 1 measures 685 mm in length, 645 mm in width, and 1065 mm in height, with a total weight of 114 kg. It has three axes, with an X-axis travel of 165 mm. The machine is equipped with a touchscreen control panel (10.1 inch, 1280 x 800 resolution) and supports connectivity via WiFi (2.4 GHz), Ethernet (1000 Mbit), and USB 2.0.
Visible components include an internal compartment accessible via a door, which contains a removable container secured by a strap and a blue handle lever. The door features a rubber sealing gasket around its perimeter. The interior surfaces show signs of use with some dust and wear marks, indicating prior operation. The exterior is clean and well-maintained with black and grey panels, an orange tinted window on the upper right side, and Formlabs branding on the front and side panels. The machine is currently placed on a wooden pallet with no visible damage.
An air filtration system is accessible through an open side door, revealing a mesh filter secured by metal clips and a blue pull handle labeled "Pull To Open Door." This system is designed for pressure-controlled two-stage filtration including HEPA and carbon filters, ensuring safe operation and air quality.
The Fuse 1 requires power inputs of EU 230 VAC 7.5 A or US 120 VAC 15 A. The printer's internal temperature is maintained at 200 degrees Celsius using quartz tube heating elements and PTC cartridges. Operating environment recommendations include temperatures between 18 to 28 degrees Celsius with humidity levels not exceeding 30 percent.
Please note, the display is damaged; however, this does not affect the printer's functionality. The machine shows typical signs of use but no major defects are visible. This FORMLABS Fuse 1 is suitable for users seeking reliable and precise 3D printing capabilities in nylon powder-based additive manufacturing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център FORMLABS Fuse 1
Vertikální obráběcí centrum FORMLABS Fuse 1
FORMLABS Fuse 1 Vertikalt bearbejdningscenter
Vertikales Bearbeitungszentrum FORMLABS Fuse 1
Κέντρο κάθετης κατεργασίας FORMLABS Fuse 1
FORMLABS Fuse 1 Vertical machining center
Centro de mecanizado vertical FORMLABS Fuse 1
Centre d'usinage vertical FORMLABS Fuse 1
Vertikalni obradni centar FORMLABS Fuse 1
FORMLABS Fuse 1 függőleges megmunkáló központ
Centro di lavorazione verticale FORMLABS Fuse 1
FORMLABS Fuse 1 vertikalus apdirbimo centras
FORMLABS Fuse 1 verticaal bewerkingscentrum
Pionowe centrum obróbcze FORMLABS Fuse 1
Centro de usinagem vertical FORMLABS Fuse 1
Centru de prelucrare vertical FORMLABS Fuse 1
Вертикальный обрабатывающий центр FORMLABS Fuse 1
VERTIKALNI ОБРАДНИ ЦЕНТАР FORMLABS Fuse 1
FORMLABS Fuse 1 Vertikalt bearbetningscenter
FORMLABS Fuse 1 Dikey işleme merkezi
EN
- Languages
English (GB)