| Category | Lathes - CNC lathes |
| Turning length | 550 mm |
| Turning Ø | 400 mm |
| Ø above the bed | 360 mm |
| Ø above transversing slide | 180 mm |
| Length between centers | 1000 mm |
| Type of CNC | FAGOR |
| Spindle taper | Camlock |
| Spindle bore | 51 mm |
| Number of tools on turret | 8 |
| Turning speed | 1800 rpm |
| Tailstock | no |
| Bar feeder | no |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Padovani LABOR 180 |
| Last availability date | 18/11/2026 |
| Product id | P261118007 |
| Language |
Padovani Labor 180S lathe with a long bed, headstock, carriage, cross-slide and tailstock. The machine has a digital readout with display windows and keypad, manual control levers and handwheels, and a multi-position toolpost. A three-jaw chuck is fitted at the headstock, with a large metal chuck guard. A yellow hinged guard is positioned above the toolpost area. The bed ways and lead screw extend along the machine. Loose brackets or attachments are visible beside the lathe; their inclusion with the machine is not specified.
Technical specifications: turning diameter 400 mm; diameter above the bed 360 mm; diameter above the cross-slide 180 mm; distance between centers 1000 mm; spindle bore 51 mm; maximum turning speed 1800 rpm. The existing specification information also identifies a Camlock spindle nose.
The headstock control panel includes selector levers, push buttons and a speed/feed chart. The machine shows visible wear, scuffs, discoloration and grime on painted surfaces and controls. Dark and rust-colored residue is present on the bed tray and chip tray, and the chuck and guard also show surface wear and grime. The electrical cabinet is open, with wiring and electrical components exposed; dust and metal debris are visible inside. Its electrical components appear aged and used. The condition of the machine’s operation has not been specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specifications: Distance between centers 1000 mm, Center height 180 mm, Max turning diameter over bed 360 mm, Max turning diameter over cross slide 180 mm, Max turning diameter in gap 400 mm. Spindle: Camlock spindle nose, Spindle bore 51 mm, Rotation speed 1800 rpm.
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 13 |
| Last activity | Nov. 21, 2026 |
RO.DI Macchine Utensili Srl is a dynamic Italian company specializing in the trade of used machine tools for chip removal and sheet metal deformation. Established with a focus on acquiring machinery from bankruptcy proceedings and voluntary liquidations, RO.DI offers a diverse range of equipment, including lathes, milling machines, and presses. Operating from a 1,500-square-meter exhibition space in Carbonate, Como, the company ensures that all machinery is thoroughly inspected and refurbished to meet high-quality and safety standards before reintroduction to the market. With over a decade of experience, RO.DI provides expert consultancy and free quotations, tailoring solutions to clients' specific production needs. Their commitment to reliability and customer satisfaction makes them a trusted partner for businesses seeking quality used machine tools.
Technical specifications: Distance between centers 1000 mm, Center height 180 mm, Max turning diameter over bed 360 mm, Max turning diameter over cross slide 180 mm, Max turning diameter in gap 400 mm. Spindle: Camlock spindle nose, Spindle bore 51 mm, Rotation speed 1800 rpm.
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Category | Lathes - CNC lathes |
| Turning length | 550 mm |
| Turning Ø | 400 mm |
| Ø above the bed | 360 mm |
| Ø above transversing slide | 180 mm |
| Length between centers | 1000 mm |
| Type of CNC | FAGOR |
| Spindle taper | Camlock |
| Spindle bore | 51 mm |
| Number of tools on turret | 8 |
| Turning speed | 1800 rpm |
| Tailstock | no |
| Bar feeder | no |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Padovani LABOR 180 |
| Last availability date | 18/11/2026 |
| Product id | P261118007 |
| Language |
Padovani Labor 180S lathe with a long bed, headstock, carriage, cross-slide and tailstock. The machine has a digital readout with display windows and keypad, manual control levers and handwheels, and a multi-position toolpost. A three-jaw chuck is fitted at the headstock, with a large metal chuck guard. A yellow hinged guard is positioned above the toolpost area. The bed ways and lead screw extend along the machine. Loose brackets or attachments are visible beside the lathe; their inclusion with the machine is not specified.
Technical specifications: turning diameter 400 mm; diameter above the bed 360 mm; diameter above the cross-slide 180 mm; distance between centers 1000 mm; spindle bore 51 mm; maximum turning speed 1800 rpm. The existing specification information also identifies a Camlock spindle nose.
The headstock control panel includes selector levers, push buttons and a speed/feed chart. The machine shows visible wear, scuffs, discoloration and grime on painted surfaces and controls. Dark and rust-colored residue is present on the bed tray and chip tray, and the chuck and guard also show surface wear and grime. The electrical cabinet is open, with wiring and electrical components exposed; dust and metal debris are visible inside. Its electrical components appear aged and used. The condition of the machine’s operation has not been specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 13 |
| Last activity | Nov. 21, 2026 |
RO.DI Macchine Utensili Srl is a dynamic Italian company specializing in the trade of used machine tools for chip removal and sheet metal deformation. Established with a focus on acquiring machinery from bankruptcy proceedings and voluntary liquidations, RO.DI offers a diverse range of equipment, including lathes, milling machines, and presses. Operating from a 1,500-square-meter exhibition space in Carbonate, Como, the company ensures that all machinery is thoroughly inspected and refurbished to meet high-quality and safety standards before reintroduction to the market. With over a decade of experience, RO.DI provides expert consultancy and free quotations, tailoring solutions to clients' specific production needs. Their commitment to reliability and customer satisfaction makes them a trusted partner for businesses seeking quality used machine tools.