Contact us to receive an offer.
| Manufacturer | Fanuc |
|---|---|
| Model | Tapecut W3 |
| Year | 1990 |
| Location | Bulgaria
|
Fanuc Tapecut W3 wire cutting EDM machine, manufactured in 1990. The machine is listed as as-is, where-is, serviced and tested, and under power. Automatic wire feeding is not available.
The machine has an electrical power rating of 11 kVA and a listed weight of 3,165 kg. It can accommodate workpieces measuring up to 700 × 950 × 300 mm, with a maximum workpiece weight of 800 kg. The stated maximum cutting speed is 900 mm/min. Wire specifications include a diameter range of 0.05–0.33 mm, wire tension of 80–1,500 g and a feed rate of 0–10 m/min. The maximum machining angle is ±10° per 100 mm or ±15° per 60 mm.
The pulse generator is transistor-based. The working dielectric is deionized water, with a resin-based water deionization system and a 360-litre dielectric tank. Filtration is provided by paper filters.
An additional chiller is included and requires testing. Original FANUC operating and technical manuals are also included. The listing provides no further details about the chiller's condition or the machine's operating history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Fanuc Tapecut W3 Wire EDM Machine
Manufacturer: Fanuc
Model: Tapecut W3
Year of manufacture: 1990
Machine type: Wire cutting EDM
Condition: As-is, where-is; serviced and tested
Operational status: Under power
Automatic wire feeding: No
Electrical power: 11 kVA
Machine weight: 3,165 kg
Maximum workpiece dimensions: 700 × 950 × 300 mm
Maximum workpiece weight: 800 kg
Maximum cutting speed: 900 mm/min
Wire diameter: 0.05–0.33 mm
Wire tension: 80–1,500 g
Wire feed rate: 0–10 m/min
Maximum machining angle: ±10° per 100 mm; ±15° per 60 mm
Pulse generator: Transistor-based
Working dielectric: Deionized water
Water deionization system: Resin-based
Dielectric tank capacity: 360 litres
Filtration system: Paper filters
Included equipment: Additional chiller, requires testing
Documentation: Original FANUC operating and technical manuals included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 24, 2026 |
Fanuc Tapecut W3 Wire EDM Machine
Manufacturer: Fanuc
Model: Tapecut W3
Year of manufacture: 1990
Machine type: Wire cutting EDM
Condition: As-is, where-is; serviced and tested
Operational status: Under power
Automatic wire feeding: No
Electrical power: 11 kVA
Machine weight: 3,165 kg
Maximum workpiece dimensions: 700 × 950 × 300 mm
Maximum workpiece weight: 800 kg
Maximum cutting speed: 900 mm/min
Wire diameter: 0.05–0.33 mm
Wire tension: 80–1,500 g
Wire feed rate: 0–10 m/min
Maximum machining angle: ±10° per 100 mm; ±15° per 60 mm
Pulse generator: Transistor-based
Working dielectric: Deionized water
Water deionization system: Resin-based
Dielectric tank capacity: 360 litres
Filtration system: Paper filters
Included equipment: Additional chiller, requires testing
Documentation: Original FANUC operating and technical manuals included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Fanuc Tapecut W3 wire cutting EDM machine, manufactured in 1990. The machine is listed as as-is, where-is, serviced and tested, and under power. Automatic wire feeding is not available.
The machine has an electrical power rating of 11 kVA and a listed weight of 3,165 kg. It can accommodate workpieces measuring up to 700 × 950 × 300 mm, with a maximum workpiece weight of 800 kg. The stated maximum cutting speed is 900 mm/min. Wire specifications include a diameter range of 0.05–0.33 mm, wire tension of 80–1,500 g and a feed rate of 0–10 m/min. The maximum machining angle is ±10° per 100 mm or ±15° per 60 mm.
The pulse generator is transistor-based. The working dielectric is deionized water, with a resin-based water deionization system and a 360-litre dielectric tank. Filtration is provided by paper filters.
An additional chiller is included and requires testing. Original FANUC operating and technical manuals are also included. The listing provides no further details about the chiller's condition or the machine's operating history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 24, 2026 |
Switzerland
1996
| X Axis | 320 mm |
|---|---|
| Z Axis | 180 mm |
| Max. workpiece width | 420 mm |
| Max. workpiece weight | 250 kg |
| Worktank length | 600 mm |
| Worktank height | 450 mm |
| Y Axis | 220 mm |
|---|---|
| Max. workpiece length | 650 mm |
| Max. workpiece height | 180 mm |
| CNC Type | Fanuc serie 16-W |
| Worktank width | 780 mm |
| Automatic Wire Feeding | Yes |
| X Axis | 550 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 730 mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | 1050 mm |
| Worktank height | 400 mm |
| Y Axis | 370 mm |
|---|---|
| Max. workpiece length | 820 mm |
| Max. workpiece height | 300 mm |
| CNC Type | Fanuc |
| Worktank width | 820 mm |
| Automatic Wire Feeding | Yes |
Italy
2019
| X Axis | 400 mm |
|---|---|
| Z Axis | 255 mm |
| Max. workpiece width | mm |
| Max. workpiece weight | 500 kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | FANUC 31I WB |
| Worktank width | mm |
| Automatic Wire Feeding |
Germany
2016
| X Axis | mm |
|---|---|
| Z Axis | mm |
| Max. workpiece width | mm |
| Max. workpiece weight | kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | |
| Worktank width | mm |
| Automatic Wire Feeding | Yes |
Italy
2008
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 775 mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | 1100 mm |
| Worktank height | mm |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 300 mm |
| CNC Type | FANUC 310is-WA |
| Worktank width | 800 mm |
| Automatic Wire Feeding | Yes |
Czech Republic
2000
| X Axis | 320 mm |
|---|---|
| Z Axis | 180 mm |
| Y Axis | 220 mm |
|---|---|
| CNC Type |
Czech Republic
2005
| X Axis | 320 mm |
|---|---|
| Z Axis | 255 mm |
| CNC Type | FANUC Series 180-is-WB |
| Y Axis | 220 mm |
|---|---|
| Max. workpiece weight | 500 kg |
Switzerland
2014
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 820 mm |
| Max. workpiece weight | 1000 kg |
| Automatic Wire Feeding | Yes |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 300 mm |
| CNC Type | FANUC 31i-WB |
Slovenia
2015
| X Axis | 600 mm |
|---|---|
| Z Axis | 300 mm |
| CNC Type | Fanuc |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece weight | 1000 kg |
Czech Republic
2006
| X Axis | 320 mm |
|---|---|
| Z Axis | 255 mm |
| CNC Type | Fanuc series 180iswb |
| Y Axis | 220 mm |
|---|---|
| Max. workpiece weight | 500 kg |
Poland
2007
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | |
| Worktank width | mm |
| Automatic Wire Feeding |
| X Axis | 520 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 730 mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | 1000 mm |
| Worktank height | 500 mm |
| Y Axis | 370 mm |
|---|---|
| Max. workpiece length | 790 mm |
| Max. workpiece height | 300 mm |
| CNC Type | FANUC |
| Worktank width | 800 mm |
| Automatic Wire Feeding | Yes |
Turkey
2017
| X Axis | 400 mm |
|---|---|
| Z Axis | 255 mm |
| Max. workpiece width | 630 mm |
| Max. workpiece weight | 500 kg |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | 730 mm |
| Max. workpiece height | 250 mm |
| CNC Type |
Czech Republic
2000
| CNC Type |
|---|
Portugal
1995
| X Axis | 450 mm |
|---|---|
| Z Axis | 300 mm |
| CNC Type | FANUC 16iW |
| Worktank width | 635 mm |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece weight | 450 kg |
| Worktank length | 745 mm |
| Worktank height | 300 mm |
Switzerland
1998
| X Axis | 320 mm |
|---|---|
| Z Axis | 180 mm |
| Max. workpiece width | 420 mm |
| Max. workpiece weight | 250 kg |
| Worktank length | 650 mm |
| Worktank height | 170 mm |
| Y Axis | 220 mm |
|---|---|
| Max. workpiece length | 650 mm |
| Max. workpiece height | 160 mm |
| CNC Type | |
| Worktank width | 420 mm |
| Automatic Wire Feeding | Yes |
Italy
2008
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 775 mm |
| CNC Type | |
| Worktank width | 800 mm |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 300 mm |
| Worktank length | 1100 mm |
| X Axis | 550 mm |
|---|---|
| Z Axis | 250 mm |
| Max. workpiece width | 350 mm |
| Max. workpiece weight | 300 kg |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 450 mm |
| Max. workpiece height | 150 mm |
| CNC Type |
Italy
2004
| X Axis | 550 mm |
|---|---|
| Z Axis | 410 mm |
| Automatic Wire Feeding | Yes |
| Y Axis | 370 mm |
|---|---|
| CNC Type |
| X Axis | 520 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 730 mm |
| Max. workpiece weight | 1000 kg |
| Y Axis | 370 mm |
|---|---|
| Max. workpiece length | 790 mm |
| Max. workpiece height | 310 mm |
| CNC Type | FANUC 18 i -W Mgi |
France
2000
| X Axis | 320 mm |
|---|---|
| Z Axis | 180 mm |
| Max. workpiece width | 120 mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | 520 mm |
| Worktank height | 300 mm |
| Y Axis | 220 mm |
|---|---|
| Max. workpiece length | 120 mm |
| Max. workpiece height | 300 mm |
| CNC Type | Fanuc |
| Worktank width | 370 mm |
| Automatic Wire Feeding | Yes |
| CNC Type |
|---|
| X Axis | 550 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 730 mm |
| Max. workpiece weight | 1000 kg |
| Worktank length | 520 mm |
| Worktank height | mm |
| Y Axis | 370 mm |
|---|---|
| Max. workpiece length | 790 mm |
| Max. workpiece height | mm |
| CNC Type | |
| Worktank width | 370 mm |
| Automatic Wire Feeding | Yes |
Singapore
2022
| X Axis | 400 mm |
|---|---|
| Z Axis | 255 mm |
| Max. workpiece width | mm |
| Max. workpiece weight | 500 kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | Fanuc |
| Worktank width | mm |
| Automatic Wire Feeding | Yes |
Телена електроерозийна машина Fanuc Tapecut W3
Drátový elektroerozivní stroj Fanuc Tapecut W3
Fanuc Tapecut W3 Trådgnistmaskiner
Fanuc Tapecut W3 Drahterodiermaschine
Μηχανή ηλεκτροδιάβρωσης με σύρμα Fanuc Tapecut W3
Fanuc Tapecut W3 Wire cutting EDM machine
Máquina de electroerosión por hilo Fanuc Tapecut W3
Machines d’électroérosion à fil Fanuc Tapecut W3
Elektroerozijski stroj s žicom Fanuc Tapecut W3
Fanuc Tapecut W3 Huzalos szikraforgácsoló gépek
Macchina per elettroerosione a filo Fanuc Tapecut W3
Fanuc Tapecut W3 Vielinės elektroerozinio pjovimo staklės
Fanuc Tapecut W3 Draadvonkmachines
Drążarki elektroerozyjne drutowe Fanuc Tapecut W3
Máquina de eletroerosão a fio Fanuc Tapecut W3
Mașini de electroeroziune cu fir Fanuc Tapecut W3
Fanuc Tapecut W3 Проволочно-вырезной электроэрозионный станок
Elektroeroziona mašina sa žicom Fanuc Tapecut W3
Fanuc Tapecut W3 Trådgnistmaskiner
Tel erozyon makinesi Fanuc Tapecut W3
Spain
EN
- Languages
English (GB)