Contact us to receive an offer.
| Manufacturer | Fanuc Robodrill |
|---|---|
| Model | A04B-0102-B134 |
| Year | 2014 |
| Location | France
|
Offer title: Fanuc Robodrill A04B-0102-B134 — Vertical machining center
Manufacturer: Fanuc Robodrill
Model: A04B-0102-B134
Year of manufacture: 2014
Weight: 2200 kg
Travel: X 700 mm, Y 400 mm, Z 350 mm
Max. permissible part weight on table: 300 kg
Technical condition (as listed): Excellent
Description:
This Fanuc Robodrill A04B-0102-B134 is a vertical machining center supplied in 2014. The unit is described as being in excellent technical condition. The machine is fitted with standard operator and safety features including a right-side control panel with display, keypad and rotary knobs and a large red emergency stop on the control panel. A yellow perforated safety door is fitted at the machine front. A white cabinet housing with an identification label is present on the enclosure.
Components and accessories (observed):
- Round tool carousel / tool magazine with numbered tool positions (numbers 1–21 visible) and a yellow triangular warning sticker on the carousel cover.
- Spindle/tool nose area with at least one tool installed.
- Workholding fixture / clamp assembly mounted on the machine table.
- Electrical/utility cabinet with warning stickers and an attached maintenance sheet; rotary power disconnect / safety switch and high-voltage warning triangle on the cabinet.
- Coolant/oil reservoir and pump assembly with a translucent tank; multiple coolant hoses and protected cable carriers, as well as electrical cables routed along the base and into the machine.
Condition notes:
There is coolant and chip residue on interior surfaces, and the table/base show metal chips, coolant residue and general wear consistent with use. Areas of rust/corrosion and oil staining/drip marks are present in some locations (including an orange-brown patch on the base plate and staining on an interior panel). These observations indicate visible wear and so on-site inspection is recommended to assess condition in detail.
Additional label: the unit carries a label reading “FANUC ROBODRILL α-D21LiA5 High Power Version.”
All numeric specifications included above are taken from the provided product information. No functional claims (tested, refurbished, warranty) are made.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer title: Fanuc Robodrill A04B-0102-B134 Vertical machining center
Manufacturer: Fanuc Robodrill
Model: A04B-0102-B134
Year of manufacture: 2014
Technical condition: Excellent
State: Visible
Weight: 2200 kg
X-axis travel: 700 mm
Y-axis travel: 400 mm
Z-axis travel: 350 mm
Max. part weight: 300 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 2 |
| Last activity | Sept. 23, 2026 |
Offer title: Fanuc Robodrill A04B-0102-B134 Vertical machining center
Manufacturer: Fanuc Robodrill
Model: A04B-0102-B134
Year of manufacture: 2014
Technical condition: Excellent
State: Visible
Weight: 2200 kg
X-axis travel: 700 mm
Y-axis travel: 400 mm
Z-axis travel: 350 mm
Max. part weight: 300 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Offer title: Fanuc Robodrill A04B-0102-B134 — Vertical machining center
Manufacturer: Fanuc Robodrill
Model: A04B-0102-B134
Year of manufacture: 2014
Weight: 2200 kg
Travel: X 700 mm, Y 400 mm, Z 350 mm
Max. permissible part weight on table: 300 kg
Technical condition (as listed): Excellent
Description:
This Fanuc Robodrill A04B-0102-B134 is a vertical machining center supplied in 2014. The unit is described as being in excellent technical condition. The machine is fitted with standard operator and safety features including a right-side control panel with display, keypad and rotary knobs and a large red emergency stop on the control panel. A yellow perforated safety door is fitted at the machine front. A white cabinet housing with an identification label is present on the enclosure.
Components and accessories (observed):
- Round tool carousel / tool magazine with numbered tool positions (numbers 1–21 visible) and a yellow triangular warning sticker on the carousel cover.
- Spindle/tool nose area with at least one tool installed.
- Workholding fixture / clamp assembly mounted on the machine table.
- Electrical/utility cabinet with warning stickers and an attached maintenance sheet; rotary power disconnect / safety switch and high-voltage warning triangle on the cabinet.
- Coolant/oil reservoir and pump assembly with a translucent tank; multiple coolant hoses and protected cable carriers, as well as electrical cables routed along the base and into the machine.
Condition notes:
There is coolant and chip residue on interior surfaces, and the table/base show metal chips, coolant residue and general wear consistent with use. Areas of rust/corrosion and oil staining/drip marks are present in some locations (including an orange-brown patch on the base plate and staining on an interior panel). These observations indicate visible wear and so on-site inspection is recommended to assess condition in detail.
Additional label: the unit carries a label reading “FANUC ROBODRILL α-D21LiA5 High Power Version.”
All numeric specifications included above are taken from the provided product information. No functional claims (tested, refurbished, warranty) are made.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 2 |
| Last activity | Sept. 23, 2026 |
Вертикален обработващ център Fanuc Robodrill A04B-0102-B134
Vertikální obráběcí centrum Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Lodret bearbejdningscenter
Fanuc Robodrill A04B-0102-B134 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Vertical machining center
Centro de mecanizado vertical Fanuc Robodrill A04B-0102-B134
Centre d'usinage vertical Fanuc Robodrill A04B-0102-B134
Vertikalni obradni centar Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Függőleges megmunkáló központ
Centro di lavoro verticale Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Vertikalus apdirbimo centras
Fanuc Robodrill A04B-0102-B134 Verticaal bewerkingscentrum
Pionowe centrum obróbcze Fanuc Robodrill A04B-0102-B134
Centro de usinagem vertical Fanuc Robodrill A04B-0102-B134
Centru de prelucrare vertical Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Вертикальный обрабатывающий центр
Vertikalni obradni centar Fanuc Robodrill A04B-0102-B134
Fanuc Robodrill A04B-0102-B134 Vertikalt bearbetningscenter
Dikey işleme merkezi Fanuc Robodrill A04B-0102-B134
EN
- Languages
English (GB)