| Manufacturer | FANUC |
|---|---|
| Model | D21 LIB5 |
| Year | 2018 |
| Location | France
|
Offering: two FANUC ROBODRILL D21 LIB5 vertical machining centers (one 5‑axis unit and one 3‑axis unit) paired with one FANUC M-20iA robot. The equipment is listed with a 2018 model year.
Included on the machining centers and peripheral equipment:
- One machining center equipped with a LEHMANN 5‑axis divider and one interchangeable plate fitted with two SHUNK zero‑point clamps.
- Second machining center supplied with a plate and two SHUNK zero‑point clamps.
- BLUM touch probe for part setup/inspection.
- FANUC M-20iA robot with a 60‑pallet magazine and a dedicated washing cell for machined parts.
- Each machining center is fitted with a TEBARON oil mist extractor.
- Two OMSAT chip conveyors.
- Central cooling system components: two GRUNDFOS pumps for central cooling with filtration, plus two GRUNDFOS pumps for machining and four pumps for machine washing.
Machine specifications (as listed):
- Table size: 850 x 410 mm
- Travel (X / Y / Z): 700 / 400 / 330 mm
- Spindle speed: 24,000 rpm
- Tool capacity per machining center: 21 tools
Optional tooling and workholding (available as needed, as listed):
- 95 BT30 tool holders, assorted BIG and NIKKEN holders, and collets
- 34 SHUNK 2 zero‑point pallets and 24 SHUNK 1 zero‑point pallets
- 144 MICROCLAMP TRIAG vises and 144 MICROCLAMP TRIAG soft jaws
Notes:
- The above content follows the provided equipment listing. Operational status, transport, installation, and any additional documentation or accessories should be confirmed with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
2 FANUC ROBODRILL D21 LIB5 vertical machining centers 5 axes + 1 FANUC M-20iA robot (year 2018):
The one on the left is 5-axis, the one on the right is 3-axis
- 1 center equipped with LEHMANN 5 AXIS divider + 1 interchangeable plate with 2 SHUNK zero points
- The 2nd machining center with plate and 2 SHUNK zero points
- 1 BLUM probe
- 1 FANUC robot with a 60-pallet magazine and a washing cell for machined parts.
Both machines are each equipped with TEBARON oil mist extractors
2 OMSAT chip conveyors with 2 pumps for central GRUNDFOS cooling with filtration + 2 GRUNDFOS pumps for machining + 4 pumps for machine washing
Table size: 850x410 mm
Travel X/Y/Z: 700/400/330
Spindle: 24,000 rpm
Tool capacity per machining center: 21
OPTIONS as needed:
95 BT30 tool holders + BIG and NIKKEN + collets
34 SHUNK 2 zero point pallets + 24 SHUNK 1 zero point pallets
144 MICROCLAMP TRIAG vises + 144 MICROCLAMP TRIAG soft jaws
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| machining-centers-5-axis-fanuc-d21-lib5-p260730010_9.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |
2 FANUC ROBODRILL D21 LIB5 vertical machining centers 5 axes + 1 FANUC M-20iA robot (year 2018):
The one on the left is 5-axis, the one on the right is 3-axis
- 1 center equipped with LEHMANN 5 AXIS divider + 1 interchangeable plate with 2 SHUNK zero points
- The 2nd machining center with plate and 2 SHUNK zero points
- 1 BLUM probe
- 1 FANUC robot with a 60-pallet magazine and a washing cell for machined parts.
Both machines are each equipped with TEBARON oil mist extractors
2 OMSAT chip conveyors with 2 pumps for central GRUNDFOS cooling with filtration + 2 GRUNDFOS pumps for machining + 4 pumps for machine washing
Table size: 850x410 mm
Travel X/Y/Z: 700/400/330
Spindle: 24,000 rpm
Tool capacity per machining center: 21
OPTIONS as needed:
95 BT30 tool holders + BIG and NIKKEN + collets
34 SHUNK 2 zero point pallets + 24 SHUNK 1 zero point pallets
144 MICROCLAMP TRIAG vises + 144 MICROCLAMP TRIAG soft jaws
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Offering: two FANUC ROBODRILL D21 LIB5 vertical machining centers (one 5‑axis unit and one 3‑axis unit) paired with one FANUC M-20iA robot. The equipment is listed with a 2018 model year.
Included on the machining centers and peripheral equipment:
- One machining center equipped with a LEHMANN 5‑axis divider and one interchangeable plate fitted with two SHUNK zero‑point clamps.
- Second machining center supplied with a plate and two SHUNK zero‑point clamps.
- BLUM touch probe for part setup/inspection.
- FANUC M-20iA robot with a 60‑pallet magazine and a dedicated washing cell for machined parts.
- Each machining center is fitted with a TEBARON oil mist extractor.
- Two OMSAT chip conveyors.
- Central cooling system components: two GRUNDFOS pumps for central cooling with filtration, plus two GRUNDFOS pumps for machining and four pumps for machine washing.
Machine specifications (as listed):
- Table size: 850 x 410 mm
- Travel (X / Y / Z): 700 / 400 / 330 mm
- Spindle speed: 24,000 rpm
- Tool capacity per machining center: 21 tools
Optional tooling and workholding (available as needed, as listed):
- 95 BT30 tool holders, assorted BIG and NIKKEN holders, and collets
- 34 SHUNK 2 zero‑point pallets and 24 SHUNK 1 zero‑point pallets
- 144 MICROCLAMP TRIAG vises and 144 MICROCLAMP TRIAG soft jaws
Notes:
- The above content follows the provided equipment listing. Operational status, transport, installation, and any additional documentation or accessories should be confirmed with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |
2 вертикални обработващи центъра FANUC ROBODRILL D21 LIB5 с 5 оси + 1 робот FANUC M-20iA (произведен през 2018 г.)
2 vertikální obráběcí centra FANUC ROBODRILL D21 LIB5 s 5 osami + 1 robot FANUC M-20iA (rok výroby 2018)
2 vertikale bearbejdningscentre af typen FANUC ROBODRILL D21 LIB5 med 5 akser + 1 FANUC M-20iA-robot (fra 2018)
2 vertikale Bearbeitungszentren vom Typ FANUC ROBODRILL D21 LIB5 (5 Achsen) + 1 FANUC-Roboter vom Typ M-20iA (Baujahr 2018)
2 κάθετα κέντρα κατεργασίας FANUC ROBODRILL D21 LIB5 5 αξόνων + 1 ρομπότ FANUC M-20iA (έτος κατασκευής 2018)
2 FANUC ROBODRILL D21 LIB5 5-axis vertical machining centers + 1 FANUC M-20iA robot (manufactured in 2018)
2 centros de mecanizado verticales FANUC ROBODRILL D21 LIB5 de 5 ejes + 1 robot FANUC M-20iA (año 2018)
2 centres d'usinage verticaux FANUC ROBODRILL D21 LIB5 5 axes+ 1 robot FANUC M-20iA (année 2018)
2 FANUC ROBODRILL D21 LIB5 5-osna vertikalna obradna centra + 1 FANUC M-20iA robot (proizveden 2018.)
2 db FANUC ROBODRILL D21 LIB5 5 tengelyes függőleges megmunkáló központ + 1 db FANUC M-20iA robot (2018-as gyártású)
2 centri di lavorazione verticali FANUC ROBODRILL D21 LIB5 a 5 assi + 1 robot FANUC M-20iA (anno 2018)
2 vertikalūs apdirbimo centrai „FANUC ROBODRILL D21 LIB5“ (5 ašys) + 1 robotas „FANUC M-20iA“ (2018 m.)
2 verticale bewerkingscentra FANUC ROBODRILL D21 LIB5 met 5 assen + 1 FANUC M-20iA-robot (bouwjaar 2018)
2 pionowe centra obróbcze FANUC ROBODRILL D21 LIB5 (5 osi) + 1 robot FANUC M-20iA (rok produkcji 2018)
2 centros de maquinagem verticais FANUC ROBODRILL D21 LIB5 de 5 eixos + 1 robô FANUC M-20iA (ano de 2018)
2 centre de prelucrare verticale FANUC ROBODRILL D21 LIB5 cu 5 axe + 1 robot FANUC M-20iA (anul 2018)
2 вертикальных обрабатывающих центра FANUC ROBODRILL D21 LIB5 с 5 осями + 1 робот FANUC M-20iA (2018 года выпуска)
2 FANUC ROBODRILL D21 LIB5 5-osnovni vertikalni obradni centri + 1 FANUC M-20iA robot (proizveden 2018. godine)
2 vertikala bearbetningscentra av typen FANUC ROBODRILL D21 LIB5 med 5 axlar + 1 robot av typen FANUC M-20iA (tillverkningsår 2018)
2 adet FANUC ROBODRILL D21 LIB5 5 eksenli dikey işleme merkezi + 1 adet FANUC M-20iA robot (2018 model)
EN
- Languages
English (GB)