Price on request
Make an offer| Max. length | 3000 mm |
| ------------------- | |
| Length x width x height | 3800.0 × 1000.0 × 1500.0 |
| Weight | 1000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 11/06/2026 |
This FACMA leveling and straightening machine is designed for working sheet metal up to 3 meters in length, making it suitable for various industrial metalworking applications. The machine features a large flat metal working surface with adjustable components, allowing precise leveling and straightening of metal sheets. It has a footprint measuring approximately 3800 mm in length, 1000 mm in width, and 1500 mm in height, and weighs around 1000 kg.
The machine is equipped with an electric motor and gearbox assembly mounted on the left side, connected with wiring and electrical conduit, providing the necessary power for operation. A control panel is located on the front left side, featuring two buttons and a red emergency stop knob for operational control and safety. Additionally, there is a visible emergency stop switch near the adjustment screw mechanism on the right side of the machine.
The frame and components are painted gray and show minor signs of wear consistent with normal use, including some surface scratches and discoloration on the metal table and around the FACMA logo on the front panel. A hand protection warning sticker is also present on the front panel to enhance operator safety.
The nameplate on the machine indicates it was manufactured by FACMA di R. MAGNI MONZA Italy and includes technical specifications such as voltage and frequency, although the year of manufacture is not clearly stated in the provided data. Overall, the machine appears to be in good used condition with typical surface wear but no visible structural damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine Tools For Iron
Facma Profiling Machine Working Sheet Metal 3 Meters
Footprint 380x100x150 Cm (H) , Weight Kg 1000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 81 |
| Last activity | June 10, 2026 |
Machine Tools For Iron
Facma Profiling Machine Working Sheet Metal 3 Meters
Footprint 380x100x150 Cm (H) , Weight Kg 1000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Max. length | 3000 mm |
| ------------------- | |
| Length x width x height | 3800.0 × 1000.0 × 1500.0 |
| Weight | 1000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 11/06/2026 |
This FACMA leveling and straightening machine is designed for working sheet metal up to 3 meters in length, making it suitable for various industrial metalworking applications. The machine features a large flat metal working surface with adjustable components, allowing precise leveling and straightening of metal sheets. It has a footprint measuring approximately 3800 mm in length, 1000 mm in width, and 1500 mm in height, and weighs around 1000 kg.
The machine is equipped with an electric motor and gearbox assembly mounted on the left side, connected with wiring and electrical conduit, providing the necessary power for operation. A control panel is located on the front left side, featuring two buttons and a red emergency stop knob for operational control and safety. Additionally, there is a visible emergency stop switch near the adjustment screw mechanism on the right side of the machine.
The frame and components are painted gray and show minor signs of wear consistent with normal use, including some surface scratches and discoloration on the metal table and around the FACMA logo on the front panel. A hand protection warning sticker is also present on the front panel to enhance operator safety.
The nameplate on the machine indicates it was manufactured by FACMA di R. MAGNI MONZA Italy and includes technical specifications such as voltage and frequency, although the year of manufacture is not clearly stated in the provided data. Overall, the machine appears to be in good used condition with typical surface wear but no visible structural damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 81 |
| Last activity | June 10, 2026 |
Машина за изправяне FACMA --
Rovnací stroj FACMA --
FACMA -- Udretningsmaskine
FACMA -- Richtmaschine
Ισιωτικό μηχάνημα FACMA --
FACMA -- Straightening machine
Aplanadora de chapas FACMA --
Planeuse de tôles FACMA --
Stroj za ravnanje FACMA --
FACMA -- Egyengető gép
Spianatrice di lamiera FACMA --
Tiesinimo mašina FACMA --
FACMA -- Richtmachine
Prostownice do blach FACMA --
Máquina de endireitamento FACMA --
Mașină de îndreptat FACMA --
FACMA -- Выпрямитель
Mašina za ravnanje FACMA --
FACMA -- Rätningsmaskin
Doğrultma makinası FACMA --
EN
- Languages
English (GB)