Contact us to receive an offer.
| Manufacturer | Extrusion lines |
|---|---|
| Model | LW20CN04 and LW21CN01 |
| Year | |
| Location | Poland
|
This offering includes two extrusion lines, models LW20CN04 and LW21CN01, manufactured by Extrusion Lines. The equipment is designed for coating steel wire with insulating materials such as polypropylene and polyethylene. Both extrusion lines are accompanied by a material drying line from the SOMOS brand.
The extrusion process involves a discharge device that directs bare steel wire to the extruder head located at the extruder outlet. In the extruder head, the wire is coated with plastic and then passes through a cooling tank where it is cooled in a water. Subsequently, the coated wire is pulled out by a wheel-belt haul-off system. The finished product is then wound onto spools with diameters of 250x150 mm or 400x250 mm by the winder positioned behind the extraction system.
The control system is based on an Allen & Bradley programmable controller, which monitors the machine's operation and manages the electrical installation by providing necessary digital and analog signals. This controller maintains continuous communication with the operator panel and the extraction and winder inverters via an Ethernet/IP network. The system incorporates a STOP safety function integrated within the inverter.
The extrusion lines are installed in a factory environment, arranged in a row with visible extruder machines equipped with hoppers for raw material feeding on both sides. The equipment is supported by blue metal stands and surrounded by yellow safety barriers. Overhead ventilation hoods are installed above the extrusion machines. The machines and the factory floor appear clean and well-maintained, indicating good overall condition.
Please note that the first extruder has approximately one year of operation, while the second has worked for about six months.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ONLY A YEAR OF WORK ON THE FIRST EXTRUDER, AND THE SECOND WORKED 6 MC-Y.
VERY GOOD CONDITION
COMPLETE
Extrusion lines LW20CN04 and LW21CN01 together with a line for drying material of the SOMOS brand
The extrusion line is used to coat steel wire with an insulating coating made of polypropylene, polyethylene, etc.
The line consists of a discharge device directing bare steel wire to the extruder head mounted at the
extruder outlet. In the head, the wire is coated with plastic, then directed to a cooling tank where it is cooled in a water bath. The wire is pulled out of the extruder and tank by a wheel-belt haul-off. Behind the extraction system there is a winder in which the finished product is wound onto spools of 250x150 or 400x250 diameter.
The device is controlled by an Allen & Bradley programmable controller, which supervises the correct operation of the machine and supplies its electrical installation with all necessary digital and analog signals.
This controller remains in a state of continuous communication with the operator panel and
the extraction and winder inverters via the Ethernet/IP communication network. The device uses the STOP safety function integrated in the inverter.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this extrusion line LW20CN04 currently connected?
This extrusion line LW20CN04 is currently connected.
What is the technical condition of this extrusion line LW21CN01?
This extrusion line LW21CN01 is in very good technical condition.
What does this equipment include for the extruders?
This equipment includes a SOMOS drying device with feeders for the extruders.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | Oct. 31, 2026 |
ONLY A YEAR OF WORK ON THE FIRST EXTRUDER, AND THE SECOND WORKED 6 MC-Y.
VERY GOOD CONDITION
COMPLETE
Extrusion lines LW20CN04 and LW21CN01 together with a line for drying material of the SOMOS brand
The extrusion line is used to coat steel wire with an insulating coating made of polypropylene, polyethylene, etc.
The line consists of a discharge device directing bare steel wire to the extruder head mounted at the
extruder outlet. In the head, the wire is coated with plastic, then directed to a cooling tank where it is cooled in a water bath. The wire is pulled out of the extruder and tank by a wheel-belt haul-off. Behind the extraction system there is a winder in which the finished product is wound onto spools of 250x150 or 400x250 diameter.
The device is controlled by an Allen & Bradley programmable controller, which supervises the correct operation of the machine and supplies its electrical installation with all necessary digital and analog signals.
This controller remains in a state of continuous communication with the operator panel and
the extraction and winder inverters via the Ethernet/IP communication network. The device uses the STOP safety function integrated in the inverter.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this extrusion line LW20CN04 currently connected?
This extrusion line LW20CN04 is currently connected.
What is the technical condition of this extrusion line LW21CN01?
This extrusion line LW21CN01 is in very good technical condition.
What does this equipment include for the extruders?
This equipment includes a SOMOS drying device with feeders for the extruders.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This offering includes two extrusion lines, models LW20CN04 and LW21CN01, manufactured by Extrusion Lines. The equipment is designed for coating steel wire with insulating materials such as polypropylene and polyethylene. Both extrusion lines are accompanied by a material drying line from the SOMOS brand.
The extrusion process involves a discharge device that directs bare steel wire to the extruder head located at the extruder outlet. In the extruder head, the wire is coated with plastic and then passes through a cooling tank where it is cooled in a water. Subsequently, the coated wire is pulled out by a wheel-belt haul-off system. The finished product is then wound onto spools with diameters of 250x150 mm or 400x250 mm by the winder positioned behind the extraction system.
The control system is based on an Allen & Bradley programmable controller, which monitors the machine's operation and manages the electrical installation by providing necessary digital and analog signals. This controller maintains continuous communication with the operator panel and the extraction and winder inverters via an Ethernet/IP network. The system incorporates a STOP safety function integrated within the inverter.
The extrusion lines are installed in a factory environment, arranged in a row with visible extruder machines equipped with hoppers for raw material feeding on both sides. The equipment is supported by blue metal stands and surrounded by yellow safety barriers. Overhead ventilation hoods are installed above the extrusion machines. The machines and the factory floor appear clean and well-maintained, indicating good overall condition.
Please note that the first extruder has approximately one year of operation, while the second has worked for about six months.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | Oct. 31, 2026 |
Линия за екструдиране Extrusion lines LW20CN04 and LW21CN01
Vytlačovací linka Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Ekstrudering linje
Extrusion lines LW20CN04 and LW21CN01 Extrusionsanlage
Γραμμή εξώθησης Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Extrusion line
Línea de extrusión Extrusion lines LW20CN04 and LW21CN01
Ligne d'extrusion Extrusion lines LW20CN04 and LW21CN01
Linija za ekstruziju Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Extrudáló vonal
Linea di estrusione Extrusion lines LW20CN04 and LW21CN01
Ekstruzijos linija Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Extrusie lijn
Linia do wytłaczania Extrusion lines LW20CN04 and LW21CN01
Linha de extrusão Extrusion lines LW20CN04 and LW21CN01
Linie de extrudare Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Экструзионная линия
Linija za ekstruziju Extrusion lines LW20CN04 and LW21CN01
Extrusion lines LW20CN04 and LW21CN01 Extruderingslinje
Ekstrüzyon hattı Extrusion lines LW20CN04 and LW21CN01
EN
- Languages
English (GB)