Contact us to receive an offer.
| Manufacturer | ESPRIT |
|---|---|
| Model | Viper |
| Year | |
| Location | United Kingdom
|
The Esprit Viper cutting machine features a large cutting bed measuring 3000 mm in length and 6000 mm in width, designed for metal processing. It operates with a gas source and includes a single gas cutting post. The machine is equipped with a Hypertherm Edge Pro CNC system for precise control. Height control functionality is integrated, along with motorized posts and dual drives that include motors, gearboxes, and drive cards to facilitate smooth gantry movement.
The cutting table is constructed with metal slats that provide support during cutting operations, though these slats show signs of heavy use and residue buildup. The gantry system supports a mounted cutting torch, and the frame is painted red with the 'Viper' label prominently displayed. On the right side of the gantry, a control panel is installed for operator interface.
The machine runs on long metal rails, approximately 10 meters on each side, which guide the gantry's travel. A large exhaust or ventilation duct is connected to the cutting table to manage fumes and particulates generated during cutting. Accompanying the system is a Donaldson Torit DCE industrial dust collector unit, connected via ducting to the building's ventilation system. This unit shows some exterior dirt and weathering.
Additional visible accessories include two gas cylinders with pressure regulators, which are chained for safety but exhibit rust and surface wear. A Hypertherm branded power supply unit with cooling fans is also present, along with an electrical control box mounted on a vertical support column. The workshop floor and surrounding areas show typical signs of use and dust.
Please note, there is mention of a potential fault with the HPR400 power source, and the cutting beds and main carriage are scheduled to be scrapped on site. The Donaldson extraction system is offered separately.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Esprit Viper 3000 x 6000 bed control unit Single gas cutting post Working on site now until end of march using a 260 as the 400 has a possible fault
Hypertherm Edge pro cnc
Height control , motorised posts, dual drives with motors/ and gear boxes/ drive cards
HPR400 with water chiller gas gas box with torch (possible fault on power source)
Rails 10m each side
Cutting beds will be scrapped on site also the main carriage
Donaldson extraction can be offer separate
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 206 |
| Last activity | Oct. 29, 2026 |
Esprit Viper 3000 x 6000 bed control unit Single gas cutting post Working on site now until end of march using a 260 as the 400 has a possible fault
Hypertherm Edge pro cnc
Height control , motorised posts, dual drives with motors/ and gear boxes/ drive cards
HPR400 with water chiller gas gas box with torch (possible fault on power source)
Rails 10m each side
Cutting beds will be scrapped on site also the main carriage
Donaldson extraction can be offer separate
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Esprit Viper cutting machine features a large cutting bed measuring 3000 mm in length and 6000 mm in width, designed for metal processing. It operates with a gas source and includes a single gas cutting post. The machine is equipped with a Hypertherm Edge Pro CNC system for precise control. Height control functionality is integrated, along with motorized posts and dual drives that include motors, gearboxes, and drive cards to facilitate smooth gantry movement.
The cutting table is constructed with metal slats that provide support during cutting operations, though these slats show signs of heavy use and residue buildup. The gantry system supports a mounted cutting torch, and the frame is painted red with the 'Viper' label prominently displayed. On the right side of the gantry, a control panel is installed for operator interface.
The machine runs on long metal rails, approximately 10 meters on each side, which guide the gantry's travel. A large exhaust or ventilation duct is connected to the cutting table to manage fumes and particulates generated during cutting. Accompanying the system is a Donaldson Torit DCE industrial dust collector unit, connected via ducting to the building's ventilation system. This unit shows some exterior dirt and weathering.
Additional visible accessories include two gas cylinders with pressure regulators, which are chained for safety but exhibit rust and surface wear. A Hypertherm branded power supply unit with cooling fans is also present, along with an electrical control box mounted on a vertical support column. The workshop floor and surrounding areas show typical signs of use and dust.
Please note, there is mention of a potential fault with the HPR400 power source, and the cutting beds and main carriage are scheduled to be scrapped on site. The Donaldson extraction system is offered separately.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 206 |
| Last activity | Oct. 29, 2026 |
Машина за рязане - плазма / газ ESPRIT Viper
Řezačka plasmová / plynová ESPRIT Viper
ESPRIT Viper Skæremaskine - Plasma/gas
ESPRIT Viper Schneidemaschine - Plasma / gas
Κοπτική μηχανή - Plasma / gas ESPRIT Viper
ESPRIT Viper Cutting machine - Plasma / gas
Máquina de corte por plasma / gas ESPRIT Viper
Machine de découpe plasma / gaz ESPRIT Viper
Stroj za rezanje - plazma / plin ESPRIT Viper
ESPRIT Viper Vágógép - Plazma/gáz
Impianto taglio plasma/ossitaglio ESPRIT Viper
Pjovimo mašina - Plazminė/dujinė ESPRIT Viper
ESPRIT Viper Snijmachine - Plasma/gas
Wycinarka plazmowa / gazowa ESPRIT Viper
Máquina de corte - Plasma / gás ESPRIT Viper
Mașină de tăiat - Plasmă/gaz ESPRIT Viper
ESPRIT Viper Станок для резки плазма / газ
Mašina za sečenje - plazma / gas ESPRIT Viper
ESPRIT Viper Skärmaskin - Plasma / gas
Kesim makinesi ESPRIT Viper
EN
- Languages
English (GB)