Contact us to receive an offer.
| Category | Miscellaneous food processing machines |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/10/2026 |
| Product id | P250506141 |
| Language |
This listing features a set of four large agitator tanks manufactured by Erwin Stelzer Warburg Rührwerktechnik, designed for industrial food processing applications. Each tank has a volume capacity of 55,000 liters and is constructed from high-quality V2A stainless steel (AISI 304, grade 1.4301), ensuring durability and corrosion resistance. The tanks have a total height of approximately 8,400 mm and a diameter of 3,400 mm, supported by three sturdy half-shell feet with fixed base plates for stable installation.
The tank design includes a marbled outside surface and a finely ground 2B=IIIC inner surface finish, suitable for hygienic processing environments. Both the top and bottom of the tanks feature dished ends. The top section is equipped with a dome that includes a manhole with a diameter of DN 300 for access and cleaning purposes, as well as a level measurement sensor with a 3/4" socket. Additionally, the tank cylinder has its own manhole for maintenance.
Each tank is fitted with an Erwin Stelzer Warburg agitator system, featuring a side-mounted hand mixer with two propeller stages. The agitator motor, model DRK 7.127, delivers 6.0 kW (8.0 HP) of power at 450 rpm and operates under continuous duty (S1) mode. The agitator shaft measures 6,870 mm in length and is equipped with two 500 mm propellers.
The tanks are connected to piping and valves at floor level, facilitating integration into existing processing lines. Metal cable trays run along the top and sides of the tanks to organize electrical wiring. The tanks and piping appear clean and well-maintained, with a dimpled surface finish visible on the stainless steel exterior. The room housing the tanks has concrete block walls and a tiled floor, providing a suitable environment for food processing operations.
This equipment is suitable for large-scale mixing and agitation tasks in food production or similar industries, combining robust construction with advanced agitator technology from Erwin Stelzer Warburg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pieces: 4
volume 55000 L
material V2A (AISI 304) 1.4301
Total height 8400 mm
Cylinder height 6000 mm
diameter 3400 mm
Number of feet 3
Outside surface marbled
Surface inside 2B=IIIC ground
agitator Erwin Stelzer Warburg Agitator Technology
Topsoil:
dished end
Level measurement with 3/4" socket
Side-mounted hand mixer with 2 propeller stages
Dome with manhole Ø DN 300
Tank cylinder:
manhole
Underbody:
dished end
Sensor for level measurement
3 half-shell feet with fixed base plate
Technical data of the hand mixer:
Manufacturer: Erwin Stelzer Warburg Rührwerktechnik
Engine type: DRK 7.127
6.0 kW 8.0 HP
390/660 volts
18.2/10.5 Amp. 0.68cosϕ
450 rpm 50 per.
Operating mode: S1
Agitator shaft: 6.870
Propellers: 2 x 500
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 112 |
| Last activity | Oct. 23, 2026 |
Pieces: 4
volume 55000 L
material V2A (AISI 304) 1.4301
Total height 8400 mm
Cylinder height 6000 mm
diameter 3400 mm
Number of feet 3
Outside surface marbled
Surface inside 2B=IIIC ground
agitator Erwin Stelzer Warburg Agitator Technology
Topsoil:
dished end
Level measurement with 3/4" socket
Side-mounted hand mixer with 2 propeller stages
Dome with manhole Ø DN 300
Tank cylinder:
manhole
Underbody:
dished end
Sensor for level measurement
3 half-shell feet with fixed base plate
Technical data of the hand mixer:
Manufacturer: Erwin Stelzer Warburg Rührwerktechnik
Engine type: DRK 7.127
6.0 kW 8.0 HP
390/660 volts
18.2/10.5 Amp. 0.68cosϕ
450 rpm 50 per.
Operating mode: S1
Agitator shaft: 6.870
Propellers: 2 x 500
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Miscellaneous food processing machines |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/10/2026 |
| Product id | P250506141 |
| Language |
This listing features a set of four large agitator tanks manufactured by Erwin Stelzer Warburg Rührwerktechnik, designed for industrial food processing applications. Each tank has a volume capacity of 55,000 liters and is constructed from high-quality V2A stainless steel (AISI 304, grade 1.4301), ensuring durability and corrosion resistance. The tanks have a total height of approximately 8,400 mm and a diameter of 3,400 mm, supported by three sturdy half-shell feet with fixed base plates for stable installation.
The tank design includes a marbled outside surface and a finely ground 2B=IIIC inner surface finish, suitable for hygienic processing environments. Both the top and bottom of the tanks feature dished ends. The top section is equipped with a dome that includes a manhole with a diameter of DN 300 for access and cleaning purposes, as well as a level measurement sensor with a 3/4" socket. Additionally, the tank cylinder has its own manhole for maintenance.
Each tank is fitted with an Erwin Stelzer Warburg agitator system, featuring a side-mounted hand mixer with two propeller stages. The agitator motor, model DRK 7.127, delivers 6.0 kW (8.0 HP) of power at 450 rpm and operates under continuous duty (S1) mode. The agitator shaft measures 6,870 mm in length and is equipped with two 500 mm propellers.
The tanks are connected to piping and valves at floor level, facilitating integration into existing processing lines. Metal cable trays run along the top and sides of the tanks to organize electrical wiring. The tanks and piping appear clean and well-maintained, with a dimpled surface finish visible on the stainless steel exterior. The room housing the tanks has concrete block walls and a tiled floor, providing a suitable environment for food processing operations.
This equipment is suitable for large-scale mixing and agitation tasks in food production or similar industries, combining robust construction with advanced agitator technology from Erwin Stelzer Warburg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 112 |
| Last activity | Oct. 23, 2026 |