Contact us to receive an offer.
| Manufacturer | Erlo |
|---|---|
| Model | TSAR 35 |
| Year | |
| Location | Spain
|
| Category | Drilling - Column drilling machines |
| Drilling Ø | 35 mm |
| Table length | 400 mm |
| Table width | 420 mm |
| Spindle speed | 2520 rpm |
| Spindle taper | CM.4 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/11/2026 |
| Product id | P261106080 |
| Language |
Колонна пробивна машина Erlo TSAR 35
Sloupová vrtačka Erlo TSAR 35
Erlo TSAR 35 Søjleboremaskine
Erlo TSAR 35 Säulenbohrmaschine
Δράπανο στήλης Erlo TSAR 35
Erlo TSAR 35 Column drilling machine
Taladro de columna Erlo TSAR 35
Perceuse à colonne Erlo TSAR 35
Stupna bušilica Erlo TSAR 35
Erlo TSAR 35 Oszlopos fúrógép
Trapano a colonna Erlo TSAR 35
Erlo TSAR 35 Koloninė gręžimo staklė
Erlo TSAR 35 Kolomboormachine
Wiertarka kolumnowa Erlo TSAR 35
Furadeira de coluna Erlo TSAR 35
Mașină de găurit cu coloană Erlo TSAR 35
Erlo TSAR 35 Сверлильный станок колонного типа
Stubna bušilica Erlo TSAR 35
Erlo TSAR 35 Pelarborrmaskin
Kolonlu matkap tezgâhı Erlo TSAR 35
|
Used Erlo TSAR 35 floor-standing column drilling machine with a stated drilling capacity of 35 mm. The machine has a geared transmission and automatic feed. Its stated spindle speed is 2520 rpm. The adjustable worktable measures 400 × 420 mm and has T-slots for workholding. The existing technical description also specifies tapping capacity in 70 kg steel, although no tapping-capacity figure is included here.
The machine is fitted with a transparent protective guard in front of the spindle area. A flexible segmented coolant hose with an orange nozzle is positioned beside the column. The head carries spindle and feed controls, while the front control panel has a selector switch, green button, red stop button and red emergency-stop button. Graduated markings are present on the front panel. These components are described as fitted; their operation has not been stated.
Visible condition includes surface rust, staining and paint wear on the worktable and its support, with rust and worn paint also present around the table edges and nearby metal surfaces. Paint is chipped and worn around the lower front of the drill head and controls, and the control-panel surface is scratched and shows wear. This is a used machine and is offered with the visible wear described above. No year of manufacture is specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This used Erlo column drill has the following technical characteristics: Drilling capacity in 70kg steel: 35 mm. Tapping capacity in 70kg steel: M.30. Transmission: Gears. Number and range of speeds (rpm) 50Hz: (8) 75-2100. Number and range of speeds (rpm) 60Hz: (8) 90-2520. Feed: Automatic. Number and range of feeds: (3) 0.10-0.20-0.30. Main motor power: 1.2/2HP. Main motor speeds: 750/1500rpm. Spindle taper: CM.4. Spindle travel: 160 mm. Table dimensions: 400x420mm. Table with T-slots.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 56 |
| Last activity | Nov. 6, 2026 |
This used Erlo column drill has the following technical characteristics: Drilling capacity in 70kg steel: 35 mm. Tapping capacity in 70kg steel: M.30. Transmission: Gears. Number and range of speeds (rpm) 50Hz: (8) 75-2100. Number and range of speeds (rpm) 60Hz: (8) 90-2520. Feed: Automatic. Number and range of feeds: (3) 0.10-0.20-0.30. Main motor power: 1.2/2HP. Main motor speeds: 750/1500rpm. Spindle taper: CM.4. Spindle travel: 160 mm. Table dimensions: 400x420mm. Table with T-slots.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Drilling - Column drilling machines |
| Drilling Ø | 35 mm |
| Table length | 400 mm |
| Table width | 420 mm |
| Spindle speed | 2520 rpm |
| Spindle taper | CM.4 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/11/2026 |
| Product id | P261106080 |
| Language |
Колонна пробивна машина Erlo TSAR 35
Sloupová vrtačka Erlo TSAR 35
Erlo TSAR 35 Søjleboremaskine
Erlo TSAR 35 Säulenbohrmaschine
Δράπανο στήλης Erlo TSAR 35
Erlo TSAR 35 Column drilling machine
Taladro de columna Erlo TSAR 35
Perceuse à colonne Erlo TSAR 35
Stupna bušilica Erlo TSAR 35
Erlo TSAR 35 Oszlopos fúrógép
Trapano a colonna Erlo TSAR 35
Erlo TSAR 35 Koloninė gręžimo staklė
Erlo TSAR 35 Kolomboormachine
Wiertarka kolumnowa Erlo TSAR 35
Furadeira de coluna Erlo TSAR 35
Mașină de găurit cu coloană Erlo TSAR 35
Erlo TSAR 35 Сверлильный станок колонного типа
Stubna bušilica Erlo TSAR 35
Erlo TSAR 35 Pelarborrmaskin
Kolonlu matkap tezgâhı Erlo TSAR 35
|
Used Erlo TSAR 35 floor-standing column drilling machine with a stated drilling capacity of 35 mm. The machine has a geared transmission and automatic feed. Its stated spindle speed is 2520 rpm. The adjustable worktable measures 400 × 420 mm and has T-slots for workholding. The existing technical description also specifies tapping capacity in 70 kg steel, although no tapping-capacity figure is included here.
The machine is fitted with a transparent protective guard in front of the spindle area. A flexible segmented coolant hose with an orange nozzle is positioned beside the column. The head carries spindle and feed controls, while the front control panel has a selector switch, green button, red stop button and red emergency-stop button. Graduated markings are present on the front panel. These components are described as fitted; their operation has not been stated.
Visible condition includes surface rust, staining and paint wear on the worktable and its support, with rust and worn paint also present around the table edges and nearby metal surfaces. Paint is chipped and worn around the lower front of the drill head and controls, and the control-panel surface is scratched and shows wear. This is a used machine and is offered with the visible wear described above. No year of manufacture is specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 56 |
| Last activity | Nov. 6, 2026 |
EN
- Languages
English (GB)