| Manufacturer | Engel |
|---|---|
| Model | Victory 500/160 tech |
| Year | 2013 |
| Location | Czech Republic
|
Machine overview:
This listing describes an ENGEL Victory 500/160 tech hydraulic injection moulding machine, manufactured in 2013. The machine features a tiebarless clamping design and an ENGEL CC200 control. Key factory specifications are provided below for evaluation and comparison.
Key technical data and features:
- Clamping force: 1600 kN
- Injection unit: 500 (injection unit designation as provided)
- Screw: hardened screw S8, Ø 35 mm, L/D 20; non-return valve R9b
- Cylinder: M3 abrasion/corrosion-resistant cylinder (rated up to 350 °C in documentation)
- L/D ratio: 20
- Control system: ENGEL CC200 (Control Brand: ENGEL, Control Model: CC200)
- Hydraulics: ECODRIVE SHV1 high-dynamic servo pump
- Electrical connection: 3 x 400 V + N + PE, 50 Hz
- Nominal connected load: approx. 102 kW
- Machine weight: 8700 kg
Clamping and mold equipment:
- Patented tiebarless, fully hydraulic ENGEL clamping system
- Centering: 160 mm
- Ejector: central ejector
- Hydraulic core pulls: 2 on the moving platen
- Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
- Mold heating: 8 control zones
- Mold temperature control: flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits)
Nozzle, tanks and interfaces:
- Open nozzle: flange thread M28 x 1.5, radius 15 mm, bore 4 mm
- Hydraulic tank capacity: main approx. 330 l; suction approx. 130 l
- Interfaces: coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2
Additional notes:
- Languages indicated for the control: Czech and German.
- This description summarizes the technical specifications provided in the original documentation. No additional condition statements or testing status are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details.Injection unit: 500
L/D ratio: 20
Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump)
Electrical connection: 3 x 400 V + N + PE, 50 Hz
Nominal connected load: approx. 102 kW
Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system
Centering: 160 mm
Ejector: Central ejector
Hydraulic core pulls: 2 on moving platen
Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
Mold heating: 8 control zones
Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b
Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm
Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits)
Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l
Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2
Languages: Czech and German
Clamping Force: 1600 kN
Control Brand: ENGEL
Control Model: CC200
Machine Weight: 8700 kg
Screw Diameter: 35 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details.Injection unit: 500
L/D ratio: 20
Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump)
Electrical connection: 3 x 400 V + N + PE, 50 Hz
Nominal connected load: approx. 102 kW
Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system
Centering: 160 mm
Ejector: Central ejector
Hydraulic core pulls: 2 on moving platen
Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
Mold heating: 8 control zones
Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b
Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm
Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits)
Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l
Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2
Languages: Czech and German
Clamping Force: 1600 kN
Control Brand: ENGEL
Control Model: CC200
Machine Weight: 8700 kg
Screw Diameter: 35 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine overview:
This listing describes an ENGEL Victory 500/160 tech hydraulic injection moulding machine, manufactured in 2013. The machine features a tiebarless clamping design and an ENGEL CC200 control. Key factory specifications are provided below for evaluation and comparison.
Key technical data and features:
- Clamping force: 1600 kN
- Injection unit: 500 (injection unit designation as provided)
- Screw: hardened screw S8, Ø 35 mm, L/D 20; non-return valve R9b
- Cylinder: M3 abrasion/corrosion-resistant cylinder (rated up to 350 °C in documentation)
- L/D ratio: 20
- Control system: ENGEL CC200 (Control Brand: ENGEL, Control Model: CC200)
- Hydraulics: ECODRIVE SHV1 high-dynamic servo pump
- Electrical connection: 3 x 400 V + N + PE, 50 Hz
- Nominal connected load: approx. 102 kW
- Machine weight: 8700 kg
Clamping and mold equipment:
- Patented tiebarless, fully hydraulic ENGEL clamping system
- Centering: 160 mm
- Ejector: central ejector
- Hydraulic core pulls: 2 on the moving platen
- Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
- Mold heating: 8 control zones
- Mold temperature control: flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits)
Nozzle, tanks and interfaces:
- Open nozzle: flange thread M28 x 1.5, radius 15 mm, bore 4 mm
- Hydraulic tank capacity: main approx. 330 l; suction approx. 130 l
- Interfaces: coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2
Additional notes:
- Languages indicated for the control: Czech and German.
- This description summarizes the technical specifications provided in the original documentation. No additional condition statements or testing status are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Шприцмашина Engel Victory 500/160 tech
Vstřikovací lis Engel Victory 500/160 tech
Engel Victory 500/160 tech Sprøjtestøbemaskine
Engel Victory 500/160 tech Spritzgießmaschine
Πρέσα έγχυσης Engel Victory 500/160 tech
Engel Victory 500/160 tech Injection moulding machine
Inyectora Engel Victory 500/160 tech
Presse à injecter Engel Victory 500/160 tech
Stroj za injekcijsko prešanje Engel Victory 500/160 tech
Engel Victory 500/160 tech Fröccsöntőgép
Pressa a iniezione Engel Victory 500/160 tech
Engel Victory 500/160 tech Įpurškimo liejimo staklės
Engel Victory 500/160 tech Spuitgietmachine
Wtryskarka Engel Victory 500/160 tech
Injetora Engel Victory 500/160 tech
Mașină de injectat Engel Victory 500/160 tech
Engel Victory 500/160 tech Термопластавтомат
Mašina za injekciono prešanje Engel Victory 500/160 tech
Engel Victory 500/160 tech Formsprutningsmaskin
Enjeksiyon makinesi Engel Victory 500/160 tech
EN
- Languages
English (GB)