| Manufacturer | Engel |
|---|---|
| Model | VICTORY 330/80 Tech |
| Year | 2007 |
| Location | Germany
|
Engel VICTORY 330/80 Tech hydraulic injection moulding machine, manufactured in 2007. The supplied specifications list a clamping force of 800 T, a shot volume of 154 cm³ and pressure on material of 1,600 bar. The press opening is listed as 456 mm, and the current description states an ejector stroke of 100 mm. The machine is not equipped with a robot.
The machine is defective and non-operational. The KEBA Kemro CP 251/Z control unit fails to boot and displays error code “8.” The controller is also identified in the supplied details as KEBA Kemro K2-200 CP 251/Z (CC 200). The machine has a control panel with a display, keypad and buttons. A material hopper, injection barrel and nozzle assembly are present. The mould-clamping area includes a platen and clamping fixtures, with a clear protective guard and mesh safety fencing around the equipment.
An overhead linear handling unit with rails, a carriage and cable carriers is shown, along with a mesh safety enclosure and a handheld control pendant. The listing notes automation, a 3-axis handling system and a conveyor belt as optional and not included; the presence of handling equipment in the shown setup does not establish that these options are included. The casing, platen and other surfaces show scuffs, grime, staining and wear.
Listed dimensions are 4,000 × 1,400 × 2,300 mm (L × W × H), and the listed weight is 5,300 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details.- Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")
- Design: Tie-bar-less (Holmlos)
- Injection Volume: 154 cm³
- Injection Pressure: 1,600 bar - Opening Stroke: 456 mm
- Ejector Stroke: 100 mm - Total Weight: 5,300 kg
- Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm
- Controller: KEBA Kemro K2-200 CP 251/Z (CC 200)
- Optional available (not included): Automation, 3-axis handling system, conveyor belt
Clamping Force: 800 kN
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details.- Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")
- Design: Tie-bar-less (Holmlos)
- Injection Volume: 154 cm³
- Injection Pressure: 1,600 bar - Opening Stroke: 456 mm
- Ejector Stroke: 100 mm - Total Weight: 5,300 kg
- Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm
- Controller: KEBA Kemro K2-200 CP 251/Z (CC 200)
- Optional available (not included): Automation, 3-axis handling system, conveyor belt
Clamping Force: 800 kN
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Engel VICTORY 330/80 Tech hydraulic injection moulding machine, manufactured in 2007. The supplied specifications list a clamping force of 800 T, a shot volume of 154 cm³ and pressure on material of 1,600 bar. The press opening is listed as 456 mm, and the current description states an ejector stroke of 100 mm. The machine is not equipped with a robot.
The machine is defective and non-operational. The KEBA Kemro CP 251/Z control unit fails to boot and displays error code “8.” The controller is also identified in the supplied details as KEBA Kemro K2-200 CP 251/Z (CC 200). The machine has a control panel with a display, keypad and buttons. A material hopper, injection barrel and nozzle assembly are present. The mould-clamping area includes a platen and clamping fixtures, with a clear protective guard and mesh safety fencing around the equipment.
An overhead linear handling unit with rails, a carriage and cable carriers is shown, along with a mesh safety enclosure and a handheld control pendant. The listing notes automation, a 3-axis handling system and a conveyor belt as optional and not included; the presence of handling equipment in the shown setup does not establish that these options are included. The casing, platen and other surfaces show scuffs, grime, staining and wear.
Listed dimensions are 4,000 × 1,400 × 2,300 mm (L × W × H), and the listed weight is 5,300 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 920 mm |
| Shot volume | 1709 cm³ |
| Platen length | 1350 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 920 mm |
| Pressure on material | 1950 bar |
| Platen width | 1350 mm |
| Number of heating zones | 6 |
| Mould size | 350 x 750 |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1170 mm |
| Shot volume | 735 cm³ |
| Robot interface | Euromap 1350/800 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Equipped with robot | Yes |
| Mould size | 250 - 900 |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 1500 mm |
| Shot volume | 5430 cm³ |
| Platen length | 1500 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 1100 mm |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 1285 mm |
| Pressure on material | 1600 bar |
| Platen width | 1285 mm |
| Equipped with robot | No |
| Number of cores | 3 |
| Mould size |
| Clamping force | 800 T |
|---|---|
| Robot interface |
| Screw diameter | 90 mm |
|---|---|
| Mould size |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 850 mm |
| Shot volume | 192 cm³ |
| Platen length | 850 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 12 |
| Mould size | 300 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 750 mm |
| Pressure on material | 2400 bar |
| Platen width | 750 mm |
| Equipped with robot | Yes |
| Number of cores | 5 |
| Opening of the press | 600 mm |
| Clamping force | 550 T |
|---|---|
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size |
| Shot volume | 1960 cm³ |
|---|---|
| Robot interface | |
| Number of heating zones | 0 |
France
2010
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 99 cm³ |
| Platen length | 500 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 400 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2210 bar |
| Platen width | 450 mm |
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size |
Romania
2013
| Clamping force | 650 T |
|---|---|
| Equipped with robot | Yes |
| Number of cores | 0 |
| Mould size |
| Shot volume | 4160 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
Romania
2013
| Clamping force | 400 T |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
| Equipped with robot | Yes |
|---|---|
| Number of cores | 0 |
| Mould size |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 318 cm³ |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Pressure on material | 1595 bar |
| Mould size |
Romania
2013
| Clamping force | 500 T |
|---|---|
| Equipped with robot | Yes |
| Number of cores | 0 |
| Mould size |
| Shot volume | 2480 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
Poland
1997
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 735 mm |
| Shot volume | 422 cm³ |
| Pressure on material | 2300 bar |
| Platen width | 1090 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Shot weight | 363 g |
| Platen length | 1080 mm |
| Equipped with robot | No |
| Number of heating zones | 5 |
| Mould size | 250...650 |
Poland
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 2850 g |
| Mould size |
| Screw diameter | 90 mm |
|---|---|
| Robot interface |
Romania
2004
| Clamping force | 70 T |
|---|---|
| Shot volume | 99 cm³ |
| Robot interface | |
| Mould size | 500 x 420 |
| Screw diameter | 30 mm |
|---|---|
| Platen length | 1100 mm |
| Opening of the press | 350 mm |
Poland
2000
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 635 mm |
| Shot volume | 735 cm³ |
| Robot interface |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 635 mm |
| Equipped with robot | No |
| Mould size |
Germany
2006
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 80 T |
|---|---|
| Pressure on material | 128 bar |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Robot interface |
| Clamping force | 110 T |
|---|---|
| Shot volume | 251 cm³ |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Robot interface |
Mexico
1998
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 530 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 330 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 430 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 56.8 g |
| Platen width | 429.3 mm |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Platen length | 650.2 mm |
| Robot interface |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Шприцмашина Engel VICTORY 330/80 Tech
Vstřikovací lis Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Sprøjtestøbemaskine
Engel VICTORY 330/80 Tech Spritzgießmaschine
Πρέσα έγχυσης Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Injection moulding machine
Inyectora Engel VICTORY 330/80 Tech
Presse à injecter Engel VICTORY 330/80 Tech
Stroj za injekcijsko prešanje Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Fröccsöntőgép
Pressa a iniezione Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Įpurškimo liejimo staklės
Engel VICTORY 330/80 Tech Spuitgietmachine
Wtryskarka Engel VICTORY 330/80 Tech
Injetora Engel VICTORY 330/80 Tech
Mașină de injectat Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Термопластавтомат
Mašina za injekciono prešanje Engel VICTORY 330/80 Tech
Engel VICTORY 330/80 Tech Formsprutningsmaskin
Enjeksiyon makinesi Engel VICTORY 330/80 Tech
Malta
Italy
Hungary
Bulgaria
EN
- Languages
English (GB)