Contact us to receive an offer.
| Manufacturer | Elumatec |
|---|---|
| Model | SBZ 150 |
| Year | 2004 |
| Location | Romania
|
The Elumatec SBZ 150 is a large industrial 5-axis CNC machining center designed for machining wood profiles. Manufactured in 2004, this model offers extensive travel paths with an X-axis stroke of 9,500 mm, a Y-axis stroke of 1,000 mm, and a Z-axis stroke of 630 mm, allowing for the processing of long profiles. It supports a maximum machining length of up to 9,220 mm without profile end machining and 8,900 mm with profile end machining.
The machine features high-speed spindle capabilities with a maximum speed of 24,000 rpm and a spindle power of 15 kW S1. It accommodates milling cutters and disk milling cutters up to 100 mm in diameter and saw blades up to 400 mm. The tool holder uses the HSK-63F standard, facilitating quick and precise tool changes.
This 5-axis center enables a range of machining processes including milling, drilling, tapping, thread milling, slotting, and sawing with a stationary profile bar. It offers programmable swivel angles on the A-axis (±110°) and C-axis (±182°) with fine increments of 1/10°, enabling complex spatial machining tasks. The machine is equipped with robust, low-wear direct drives on all axes and supports 2-layer machining for pendulum operation.
Additional features include a 15-inch color display, USB ports, network connectivity, and options for 6-sided machining at the front or from below. The machine requires a compressed air connection at 7 bar and electrical supply of 400 V, 3-phase, 50 Hz, 80 A.
The machine is currently dismantled and sold as is. It was purchased recently but has not been tested by the current owner. The machine was reportedly working when acquired from the previous seller. Visible inspection shows some signs of use, including dirt and wear on the surface. An orange protective cover is present near the base of the machine. Documentation of the machine disassembly is included. Loading costs are free, while transportation costs are the buyer's responsibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TECHNICAL DETAILS
SBZ 150 - 9.0 m
• Max. machining length with profile end machining, 8,900 mm
• Max. machining length without profile end machining, 9,220 mm
Travel path X-axis: 9,500 mm
Travel path Y-axis: 1,000 mm
Travel path Z-axis: 630 mm
Feed rate X-axis: 70 m/min
Feed rate Y-axis: 40 m/min
Feed rate Z-axis: 40 m/min
Swivel angle A-axis: ±110° freely programmable in 1/10° increments
Swivel angle C-axis: ±182° freely programmable in 1/10° increments
Spindle speed: max. 24,000 rpm
Spindle power: 15 kW S1
Max. milling cutter diameter: 100 mm
Max. disk milling cutter diameter: 100 mm
Max. saw blade diameter: 400 mm
Tool holder: HSK-63F
MACHINE DETAILS
Compressed air connection: 7 bar
Electrical connection: 400 V, 3~, 50 Hz, 80 A
Air consumption: approx. 200 l/min with spraying
EQUIPMENT
Machining processes: milling, drilling, tapping, thread milling, slotting and sawing with
stationary profile bar
6-sided machining: optional at the front, possible from below
Profile bar protection: machining with stationary profile bar
Robust and low-wear direct drives on all axes
Axes: 5-axis control for spatial machining
Display: 15-inch color screen
Interfaces: USB ports, network connection
2-layer machining for pendulum operation
Associated tools (HSK holders)
Two circular saws for aluminium
Note: Documentation of the machine disassembly is included.
IMPORTANT NOTE:
The machine is dismantled and cannot be tested. it was purchased recently but not used since we received it since it is too big for our production.
We could not test it.
It waw working when we purchased it from the previous seller.
Sold AS IS
Condition: dismounted
It was not tested by us. We bought as ready for operation status and functionality fully functional.
Loading cost is free.
Transportation cost is the buyer responsibility.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| machining-5-axis-wood-cnc-machining-centers-elumatec-sbz-150-p260522107_5.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 4, 2026 |
TECHNICAL DETAILS
SBZ 150 - 9.0 m
• Max. machining length with profile end machining, 8,900 mm
• Max. machining length without profile end machining, 9,220 mm
Travel path X-axis: 9,500 mm
Travel path Y-axis: 1,000 mm
Travel path Z-axis: 630 mm
Feed rate X-axis: 70 m/min
Feed rate Y-axis: 40 m/min
Feed rate Z-axis: 40 m/min
Swivel angle A-axis: ±110° freely programmable in 1/10° increments
Swivel angle C-axis: ±182° freely programmable in 1/10° increments
Spindle speed: max. 24,000 rpm
Spindle power: 15 kW S1
Max. milling cutter diameter: 100 mm
Max. disk milling cutter diameter: 100 mm
Max. saw blade diameter: 400 mm
Tool holder: HSK-63F
MACHINE DETAILS
Compressed air connection: 7 bar
Electrical connection: 400 V, 3~, 50 Hz, 80 A
Air consumption: approx. 200 l/min with spraying
EQUIPMENT
Machining processes: milling, drilling, tapping, thread milling, slotting and sawing with
stationary profile bar
6-sided machining: optional at the front, possible from below
Profile bar protection: machining with stationary profile bar
Robust and low-wear direct drives on all axes
Axes: 5-axis control for spatial machining
Display: 15-inch color screen
Interfaces: USB ports, network connection
2-layer machining for pendulum operation
Associated tools (HSK holders)
Two circular saws for aluminium
Note: Documentation of the machine disassembly is included.
IMPORTANT NOTE:
The machine is dismantled and cannot be tested. it was purchased recently but not used since we received it since it is too big for our production.
We could not test it.
It waw working when we purchased it from the previous seller.
Sold AS IS
Condition: dismounted
It was not tested by us. We bought as ready for operation status and functionality fully functional.
Loading cost is free.
Transportation cost is the buyer responsibility.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Elumatec SBZ 150 is a large industrial 5-axis CNC machining center designed for machining wood profiles. Manufactured in 2004, this model offers extensive travel paths with an X-axis stroke of 9,500 mm, a Y-axis stroke of 1,000 mm, and a Z-axis stroke of 630 mm, allowing for the processing of long profiles. It supports a maximum machining length of up to 9,220 mm without profile end machining and 8,900 mm with profile end machining.
The machine features high-speed spindle capabilities with a maximum speed of 24,000 rpm and a spindle power of 15 kW S1. It accommodates milling cutters and disk milling cutters up to 100 mm in diameter and saw blades up to 400 mm. The tool holder uses the HSK-63F standard, facilitating quick and precise tool changes.
This 5-axis center enables a range of machining processes including milling, drilling, tapping, thread milling, slotting, and sawing with a stationary profile bar. It offers programmable swivel angles on the A-axis (±110°) and C-axis (±182°) with fine increments of 1/10°, enabling complex spatial machining tasks. The machine is equipped with robust, low-wear direct drives on all axes and supports 2-layer machining for pendulum operation.
Additional features include a 15-inch color display, USB ports, network connectivity, and options for 6-sided machining at the front or from below. The machine requires a compressed air connection at 7 bar and electrical supply of 400 V, 3-phase, 50 Hz, 80 A.
The machine is currently dismantled and sold as is. It was purchased recently but has not been tested by the current owner. The machine was reportedly working when acquired from the previous seller. Visible inspection shows some signs of use, including dirt and wear on the surface. An orange protective cover is present near the base of the machine. Documentation of the machine disassembly is included. Loading costs are free, while transportation costs are the buyer's responsibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 4, 2026 |
Looking for a used woodworking machine?
Woodworking machines cover a broad range of equipment used to cut, shape, join, and finish wood and wood-based panels. The category includes CNC routers, panel saws, edge banders, planers, moulders, wide-belt sanders, boring machines, tenoners, and many other specialised machines — each designed for specific operations in furniture production, joinery, timber processing, or panel-based manufacturing.
On Exapro, you can browse used woodworking machines currently listed by sellers in Romania. Filter by machine type, working width, number of spindles, automation level, or control system to find equipment suited to your workshop or production line. With machines physically located in Romania, buyers across Europe and beyond can arrange on-site inspections and benefit from competitive intra-EU transport routes.
Browse all used woodworking machines in Romania available on Exapro today.
Петосеви CNC обработващ център за дърво Elumatec SBZ 150
Pětiosé CNC obráběcí centrum na dřevo Elumatec SBZ 150
Elumatec SBZ 150 5-akset CNC-træbearbejdningscenter
Elumatec SBZ 150 5-Achs-CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας CNC 5 αξόνων για ξύλο Elumatec SBZ 150
Elumatec SBZ 150 5-axis wood CNC machining center - 9 meters
Centro de mecanizado CNC de 5 ejes para madera Elumatec SBZ 150
Centre d’usinage CNC 5 axes pour le bois Elumatec SBZ 150
Petosno CNC obradno središte za drvo Elumatec SBZ 150
Elumatec SBZ 150 Öttengelyes CNC faipari megmunkálóközpont
Centro di lavoro CNC a 5 assi per legno Elumatec SBZ 150
Elumatec SBZ 150 Penkių ašių CNC medienos apdirbimo centras
Elumatec SBZ 150 5-assig CNC-houtbewerkingscentrum
Pięcioosiowe centrum obróbcze CNC do drewna Elumatec SBZ 150
Centro de usinagem CNC de 5 eixos para madeira Elumatec SBZ 150
Centru de prelucrare CNC cu 5 axe pentru lemn Elumatec SBZ 150
Elumatec SBZ 150 Пятиосевой деревообрабатывающий обрабатывающий центр с ЧПУ
Petosni CNC obradni centar za drvo Elumatec SBZ 150
Elumatec SBZ 150 5-axligt CNC-träbearbetningscenter
5 eksenli CNC ahşap işleme merkezi Elumatec SBZ 150
EN
- Languages
English (GB)