| Manufacturer | Electromashstan |
|---|---|
| Model | EMC-SP/3/05 Sigma |
| Year | 2019 |
| Location | Poland
|
The Electromashstan EMC-SP/3/05 Sigma profile line, manufactured in 2019 by the Ukrainian company Electromashstan, is designed for efficient production of cold-formed Sigma profiles from coil sheet metal. This profile line includes a coil decoiler, a roll former equipped with forming rollers, and a programmable industrial control system. It processes galvanized steel, galvanized steel with polymer coating, and hot-rolled steel sheets with thicknesses up to 13.0 mm, operating at a line speed of 50 meters per minute.
The system supports automatic, manual, and service operation modes. The coil decoiler is automatic and reversible, driven by an asynchronous, frequency-controlled motor with a Mitsubishi inverter. Each forming roller is also powered by an asynchronous motor with individual frequency control. The hydraulic guillotine, optionally electromechanical or pneumatic, features a profiled knife and Carlo Gavazzi or Camozzi sensors for precise cutting. A hydraulic punch equipped with Carlo Gavazzi sensors allows for punching mounting holes.
The control panel includes a sensor operator interface with internet access, facilitating easy monitoring and adjustments. Additional features include an Autonics rotary pulse encoder for belt movement sensing and an automatic lubrication system to maintain optimal operation.
The machine is painted blue and situated in a clean indoor industrial environment. Multiple electric motors are mounted on top of the machine, and a blue and yellow decoiler with a metal coil holder is part of the setup. The area contains wooden pallets and support structures near the machine, as well as a gray control panel or electrical cabinet nearby. Coiled metal sheets are also present on wooden pallets close to the equipment. This profile line is suitable for producing structural elements used in steel halls, warehouses, prefabricated buildings, and lightweight steel frame structures requiring high load-bearing capacity with relatively low weight.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Electromashstan EMC-SP/3/05 Sigma profile line was manufactured in 2019 by the Ukrainian company ElectroMashStan. The line includes a coil decoiler, a roll former with forming rollers, and a control system. The sheet metal unrolled from the coil is then fed to the roll former, where cold-formed Sigma profiles are created using roll forming. The Sigma profile line is a precise and efficient solution for the steel industry, prefabricated structures, and lightweight frame structures. Sigma profiles are widely used in the construction of prefabricated residential and industrial buildings. Sigma profile applications
include: steel structures (halls, warehouses, industrial facilities)
, prefabricated buildings and lightweight steel structure systems
, load-bearing elements: girders, columns, beams, supports
, bracing, and structural frames
, and applications requiring high load-bearing capacity in a relatively lightweight structure.
- line operation mode: automatic, manual, service
- material: sheet metal in coils
- material type: galvanized steel, galvanized steel with polymer coating, hot-rolled steel
- uncoiler type: automatic, reversible
- uncoiler drive: asynchronous, frequency-controlled with its own Mitsubishi inverter (VARVEL/TRAMEC/MOTOVARIO gear motor)
- sheet thickness: 1-3mm
- forming speed: 50m/min
- profile length axis accuracy: ± 1mm
- maximum profile length: each
- maximum number of mounting holes: each
- rollers: asynchronous, each of them is frequency-controlled with its own Mitsubishi inverter (VARVEL/TRAMEC/MOTOVARIO gear motor)
- guillotine type: hydraulic/electromechanical/pneumatic (optional), with a profiled knife, with Carlo Gavazzi/Camozzi sensors
- control: programmable industrial controller with a sensor operator panel (with access to Internet)
- belt movement sensor: Autonics rotary pulse encoder
- punch for punching mounting holes: hydraulic, with Carlo Gavazzi sensors
- lubrication: automatic
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 424 |
| Last activity | Nov. 8, 2026 |
The Electromashstan EMC-SP/3/05 Sigma profile line was manufactured in 2019 by the Ukrainian company ElectroMashStan. The line includes a coil decoiler, a roll former with forming rollers, and a control system. The sheet metal unrolled from the coil is then fed to the roll former, where cold-formed Sigma profiles are created using roll forming. The Sigma profile line is a precise and efficient solution for the steel industry, prefabricated structures, and lightweight frame structures. Sigma profiles are widely used in the construction of prefabricated residential and industrial buildings. Sigma profile applications
include: steel structures (halls, warehouses, industrial facilities)
, prefabricated buildings and lightweight steel structure systems
, load-bearing elements: girders, columns, beams, supports
, bracing, and structural frames
, and applications requiring high load-bearing capacity in a relatively lightweight structure.
- line operation mode: automatic, manual, service
- material: sheet metal in coils
- material type: galvanized steel, galvanized steel with polymer coating, hot-rolled steel
- uncoiler type: automatic, reversible
- uncoiler drive: asynchronous, frequency-controlled with its own Mitsubishi inverter (VARVEL/TRAMEC/MOTOVARIO gear motor)
- sheet thickness: 1-3mm
- forming speed: 50m/min
- profile length axis accuracy: ± 1mm
- maximum profile length: each
- maximum number of mounting holes: each
- rollers: asynchronous, each of them is frequency-controlled with its own Mitsubishi inverter (VARVEL/TRAMEC/MOTOVARIO gear motor)
- guillotine type: hydraulic/electromechanical/pneumatic (optional), with a profiled knife, with Carlo Gavazzi/Camozzi sensors
- control: programmable industrial controller with a sensor operator panel (with access to Internet)
- belt movement sensor: Autonics rotary pulse encoder
- punch for punching mounting holes: hydraulic, with Carlo Gavazzi sensors
- lubrication: automatic
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Electromashstan EMC-SP/3/05 Sigma profile line, manufactured in 2019 by the Ukrainian company Electromashstan, is designed for efficient production of cold-formed Sigma profiles from coil sheet metal. This profile line includes a coil decoiler, a roll former equipped with forming rollers, and a programmable industrial control system. It processes galvanized steel, galvanized steel with polymer coating, and hot-rolled steel sheets with thicknesses up to 13.0 mm, operating at a line speed of 50 meters per minute.
The system supports automatic, manual, and service operation modes. The coil decoiler is automatic and reversible, driven by an asynchronous, frequency-controlled motor with a Mitsubishi inverter. Each forming roller is also powered by an asynchronous motor with individual frequency control. The hydraulic guillotine, optionally electromechanical or pneumatic, features a profiled knife and Carlo Gavazzi or Camozzi sensors for precise cutting. A hydraulic punch equipped with Carlo Gavazzi sensors allows for punching mounting holes.
The control panel includes a sensor operator interface with internet access, facilitating easy monitoring and adjustments. Additional features include an Autonics rotary pulse encoder for belt movement sensing and an automatic lubrication system to maintain optimal operation.
The machine is painted blue and situated in a clean indoor industrial environment. Multiple electric motors are mounted on top of the machine, and a blue and yellow decoiler with a metal coil holder is part of the setup. The area contains wooden pallets and support structures near the machine, as well as a gray control panel or electrical cabinet nearby. Coiled metal sheets are also present on wooden pallets close to the equipment. This profile line is suitable for producing structural elements used in steel halls, warehouses, prefabricated buildings, and lightweight steel frame structures requiring high load-bearing capacity with relatively low weight.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 424 |
| Last activity | Nov. 8, 2026 |
Линия за рязане / линия за рязане по дължина Electromashstan EMC-SP/3/05 Sigma
Řezací linka / linka s podélným řezem Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Opskæring line / Skær til længde linje
Electromashstan EMC-SP/3/05 Sigma Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Slitting line / Cut to length line
Línea de corte transversal Electromashstan EMC-SP/3/05 Sigma
Ligne de refendage Electromashstan EMC-SP/3/05 Sigma
Linija za rezanje / Linija za rezanje na duljinu Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio Electromashstan EMC-SP/3/05 Sigma
Pjaustymo linija / Iškirpti iki ilgio linijos Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm Electromashstan EMC-SP/3/05 Sigma
Linha de corte / Linha de corte no comprimento Electromashstan EMC-SP/3/05 Sigma
Linie de tăiere / Linie de tăiere la lungime Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Линия продольной резки
Linija sečenja / linija sečenja na dužinu Electromashstan EMC-SP/3/05 Sigma
Electromashstan EMC-SP/3/05 Sigma Klipplina / Klipp till längdlinjen
Dilme hattı Electromashstan EMC-SP/3/05 Sigma
EN
- Languages
English (GB)