Contact us to receive an offer.
| Manufacturer | EIKON |
|---|---|
| Model | MV2-1500 |
| Year | 2003 |
| Location | Netherlands
|
3‑axis vertical machining center offered in good condition. The machine was mainly used to process plastic and has recorded 7434 spindle hours. It is presented with a HEIDENHAIN TNC 410 CNC control and is described as available for immediate delivery.
Key technical specifications
- Travel X axis: 1500 mm
- Travel Y axis: 300 mm
- Travel Z axis: 350 mm
- Number of axes: 3
- Maximum spindle speed: 8000 rpm
- Maximum product length: 2900 mm
- Toolholder: BT40
- Tool magazine capacity: 19 positions
- Internal cooling: air cooling through the spindle
- Clamp surface height above machine table: 860 mm
- Maximum tool diameter: 80 mm
- Maximum tool length: 200 mm
- Maximum tool weight: 3 kg
- Total height: 2300 mm
- Total width: 3250 mm
- Overall weight: 3200 kg
Accessories and tooling
An optional set of approximately 30 BT-40 holders is available. The set is reported to include drill chuck holders, Weldon holders and collet chucks. The machine’s tool magazine capacity is 19 positions.
Condition and inspection
The seller states the machine was mainly used on plastic and therefore did not undergo heavy machining. A spindle hour count of 7434 is provided. No statements about testing, refurbishment or warranty are included.
Disclaimer
The information above has been obtained to the best of our ability and belief but is not guaranteed and does not form a contractual condition. All essential details should be verified during an inspection of the machine. To reduce unnecessary travel, organizing a live video inspection is recommended in many cases.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
vertical machining centers
Opportunity to buy a 3 axis vertical machining center in good condition.
Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours.
Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks.
This machine is immediately available for delivery.
Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
Travel Distance X Axis: 1500 mm
Travel Distance Y Axis: 300 mm
Travel Distance Z Axis: 350 mm
Cnc Control: HEIDENHAIN TNC 410
Total Height: 2300 mm
Total Width: 3250 mm
Overall Weight: 3200 kg
Spindle Speed Max: 8000 rpm
Product Length Max: 2900 mm
Number Of Axes: 3
Toolholder: BT40
Clamp Surface Height Above Machine Table: 860 mm
Max Tool Diameter: 80 mm
Max Tool Length: 200 mm
Max Tool Weight: 3 kg
Internal Cooling: Air cooling through the spindle
Capacity Tool Magazine: 19 positions
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 9 |
| Last activity | Oct. 30, 2026 |
vertical machining centers
Opportunity to buy a 3 axis vertical machining center in good condition.
Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours.
Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks.
This machine is immediately available for delivery.
Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
Travel Distance X Axis: 1500 mm
Travel Distance Y Axis: 300 mm
Travel Distance Z Axis: 350 mm
Cnc Control: HEIDENHAIN TNC 410
Total Height: 2300 mm
Total Width: 3250 mm
Overall Weight: 3200 kg
Spindle Speed Max: 8000 rpm
Product Length Max: 2900 mm
Number Of Axes: 3
Toolholder: BT40
Clamp Surface Height Above Machine Table: 860 mm
Max Tool Diameter: 80 mm
Max Tool Length: 200 mm
Max Tool Weight: 3 kg
Internal Cooling: Air cooling through the spindle
Capacity Tool Magazine: 19 positions
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
3‑axis vertical machining center offered in good condition. The machine was mainly used to process plastic and has recorded 7434 spindle hours. It is presented with a HEIDENHAIN TNC 410 CNC control and is described as available for immediate delivery.
Key technical specifications
- Travel X axis: 1500 mm
- Travel Y axis: 300 mm
- Travel Z axis: 350 mm
- Number of axes: 3
- Maximum spindle speed: 8000 rpm
- Maximum product length: 2900 mm
- Toolholder: BT40
- Tool magazine capacity: 19 positions
- Internal cooling: air cooling through the spindle
- Clamp surface height above machine table: 860 mm
- Maximum tool diameter: 80 mm
- Maximum tool length: 200 mm
- Maximum tool weight: 3 kg
- Total height: 2300 mm
- Total width: 3250 mm
- Overall weight: 3200 kg
Accessories and tooling
An optional set of approximately 30 BT-40 holders is available. The set is reported to include drill chuck holders, Weldon holders and collet chucks. The machine’s tool magazine capacity is 19 positions.
Condition and inspection
The seller states the machine was mainly used on plastic and therefore did not undergo heavy machining. A spindle hour count of 7434 is provided. No statements about testing, refurbishment or warranty are included.
Disclaimer
The information above has been obtained to the best of our ability and belief but is not guaranteed and does not form a contractual condition. All essential details should be verified during an inspection of the machine. To reduce unnecessary travel, organizing a live video inspection is recommended in many cases.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 9 |
| Last activity | Oct. 30, 2026 |
Вертикален обработващ център EIKON MV2-1500
Vertikální obráběcí centrum EIKON MV2-1500
EIKON MV2-1500 Lodret bearbejdningscenter
EIKON MV2-1500 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας EIKON MV2-1500
EIKON MV2-1500 Vertical machining center
Centro de mecanizado vertical EIKON MV2-1500
Centre d'usinage vertical EIKON MV2-1500
Vertikalni obradni centar EIKON MV2-1500
EIKON MV2-1500 Függőleges megmunkáló központ
Centro di lavoro verticale EIKON MV2-1500
EIKON MV2-1500 Vertikalus apdirbimo centras
EIKON MV2-1500 Verticaal bewerkingscentrum
Pionowe centrum obróbcze EIKON MV2-1500
Centro de usinagem vertical EIKON MV2-1500
Centru de prelucrare vertical EIKON MV2-1500
EIKON MV2-1500 Вертикальный обрабатывающий центр
Vertikalni obradni centar EIKON MV2-1500
EIKON MV2-1500 Vertikalt bearbetningscenter
Dikey işleme merkezi EIKON MV2-1500
EN
- Languages
English (GB)