| Manufacturer | Durma |
|---|---|
| Model | ADS 25100 |
| Year | 2006 |
| Location | Germany
|
| Category | Bending - CNC press brakes |
| Strength | 1000 T |
| Folding length | 2500 mm |
| CNC | Delem DA66T |
| Vertical stroke | 265 mm |
| Axis number | 4 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Durma AD S 25100 |
| Last availability date | 22/10/2026 |
| Product id | P261022176 |
| Language |
CNC абкант преса Durma ADS 25100
CNC ohraňovací lis Durma ADS 25100
Durma ADS 25100 CNC-kantpresse
Durma ADS 25100 CNC-Abkantpresse
CNC στραντζόπρεσα Durma ADS 25100
Durma ADS 25100 CNC press brake
Prensa plegadora CNC Durma ADS 25100
Presse plieuse CNC Durma ADS 25100
CNC abkant preša Durma ADS 25100
Durma ADS 25100 CNC él-hajlító prés
Piegatrice CNC Durma ADS 25100
Durma ADS 25100 CNC lenkimo presas
Durma ADS 25100 CNC-kantpers
Prasa krawędziowa CNC Durma ADS 25100
Prensa dobradeira CNC Durma ADS 25100
Presă abkant CNC Durma ADS 25100
Durma ADS 25100 Листогибочный пресс с ЧПУ
CNC abkant presa Durma ADS 25100
Durma ADS 25100 CNC-kantpress
CNC abkant pres Durma ADS 25100
|
Durma ADS 25100 CNC press brake, manufactured in 2006, with four axes. The listing specifies a bending length of 2500 mm and a pressing force of 1000 kN (100 tons). The machine has a long bending bed with segmented tooling across its width, and a separate control console with a screen and keypad is mounted on the right side. A wired foot control is also present beside the machine.
The press brake includes a rear support and positioning assembly with long linear rails and sliding blocks. A vertical measuring or position scale assembly is mounted near the side frame, and the machine has an enclosed body with a large side access panel and vertical handle. Hydraulic components, fittings and sensor wiring are visible around the frame. Segmented punch tooling is present along the upper beam, with the lower bed beneath it.
Visible condition details include scuffs and paint wear on the lower front panel, chipped paint on a frame edge, and minor marks on the interior panels. Dust, grime and surface wear are also present on the rear rail assembly and drive housing. A short section of cable or conduit hangs below the upper beam. The machine is offered as pictured; its operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis Durma ADS 25100 was manufactured in 2006. It features a press force of 100 tons and a length of 2500 mm, making it suitable for various bending applications. If you are looking to get high-quality bending capabilities, consider the Durma ADS 25100 press brake we have for sale. Contact us for further details.Bending Length: 2500 mm
Pressing Force: 1000 Kn
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2109 |
| Last activity | Oct. 23, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis Durma ADS 25100 was manufactured in 2006. It features a press force of 100 tons and a length of 2500 mm, making it suitable for various bending applications. If you are looking to get high-quality bending capabilities, consider the Durma ADS 25100 press brake we have for sale. Contact us for further details.Bending Length: 2500 mm
Pressing Force: 1000 Kn
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Bending - CNC press brakes |
| Strength | 1000 T |
| Folding length | 2500 mm |
| CNC | Delem DA66T |
| Vertical stroke | 265 mm |
| Axis number | 4 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Durma AD S 25100 |
| Last availability date | 22/10/2026 |
| Product id | P261022176 |
| Language |
CNC абкант преса Durma ADS 25100
CNC ohraňovací lis Durma ADS 25100
Durma ADS 25100 CNC-kantpresse
Durma ADS 25100 CNC-Abkantpresse
CNC στραντζόπρεσα Durma ADS 25100
Durma ADS 25100 CNC press brake
Prensa plegadora CNC Durma ADS 25100
Presse plieuse CNC Durma ADS 25100
CNC abkant preša Durma ADS 25100
Durma ADS 25100 CNC él-hajlító prés
Piegatrice CNC Durma ADS 25100
Durma ADS 25100 CNC lenkimo presas
Durma ADS 25100 CNC-kantpers
Prasa krawędziowa CNC Durma ADS 25100
Prensa dobradeira CNC Durma ADS 25100
Presă abkant CNC Durma ADS 25100
Durma ADS 25100 Листогибочный пресс с ЧПУ
CNC abkant presa Durma ADS 25100
Durma ADS 25100 CNC-kantpress
CNC abkant pres Durma ADS 25100
|
Durma ADS 25100 CNC press brake, manufactured in 2006, with four axes. The listing specifies a bending length of 2500 mm and a pressing force of 1000 kN (100 tons). The machine has a long bending bed with segmented tooling across its width, and a separate control console with a screen and keypad is mounted on the right side. A wired foot control is also present beside the machine.
The press brake includes a rear support and positioning assembly with long linear rails and sliding blocks. A vertical measuring or position scale assembly is mounted near the side frame, and the machine has an enclosed body with a large side access panel and vertical handle. Hydraulic components, fittings and sensor wiring are visible around the frame. Segmented punch tooling is present along the upper beam, with the lower bed beneath it.
Visible condition details include scuffs and paint wear on the lower front panel, chipped paint on a frame edge, and minor marks on the interior panels. Dust, grime and surface wear are also present on the rear rail assembly and drive housing. A short section of cable or conduit hangs below the upper beam. The machine is offered as pictured; its operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2109 |
| Last activity | Oct. 23, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
EN
- Languages
English (GB)