Price on request
View price| Strength | 220 T |
| Folding length | 3100 mm |
| CNC | Cybelec |
| Axis number | 8 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | |
| Last availability date | 20/01/2026 |
This listing features a Durma AD-S 30220 CNC press brake manufactured in 2014, designed for precision bending and forming of sheet metal. The machine has a pressing strength of 220 tons and a folding length of 3100 mm, supported by an 8-axis CNC control system. The press brake is equipped with a Cybelec ModEva 15T control panel, which includes a screen, keypad, and various control buttons such as emergency stop and pump controls, all of which appear intact with minor signs of wear.
The machine comes fitted with press brake tooling, including both upper and lower dies, mounted and ready for use. A chain drive mechanism is visible on the right side, along with a Fiessler Elektronik component attached near the tooling. The back gauge assembly is present with protective covers on the fingers and accordion-style bellows protecting the guide rails. These components show light dust and some surface scratches indicative of normal use but no significant damage.
The machine’s frame and surfaces exhibit minor signs of use and dust accumulation but appear structurally sound. Safety is addressed with visible warning labels on the machine. According to the nameplate, the press brake has a stroke of 265 mm, lubricant capacity of 250 liters, and dimensions of approximately 4600 mm in length, 2370 mm in width, and 2900 mm in height, with a total weight of 12,500 kg.
Overall, this Durma AD-S 30220 CNC press brake is a robust and well-equipped machine suitable for demanding metal forming tasks, combining substantial pressing power with advanced CNC control and essential tooling and back gauge components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Durma AD-S 30220 CNC Press Brake
Number of axes: 8
220 Ton
Cybelec Control Unit
Machine is in very good condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Consultant / Intermediary |
| Active since | 2015 |
| Offers online | 8 |
| Last activity | June 16, 2026 |
Durma AD-S 30220 CNC Press Brake
Number of axes: 8
220 Ton
Cybelec Control Unit
Machine is in very good condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Strength | 220 T |
| Folding length | 3100 mm |
| CNC | Cybelec |
| Axis number | 8 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | |
| Last availability date | 20/01/2026 |
This listing features a Durma AD-S 30220 CNC press brake manufactured in 2014, designed for precision bending and forming of sheet metal. The machine has a pressing strength of 220 tons and a folding length of 3100 mm, supported by an 8-axis CNC control system. The press brake is equipped with a Cybelec ModEva 15T control panel, which includes a screen, keypad, and various control buttons such as emergency stop and pump controls, all of which appear intact with minor signs of wear.
The machine comes fitted with press brake tooling, including both upper and lower dies, mounted and ready for use. A chain drive mechanism is visible on the right side, along with a Fiessler Elektronik component attached near the tooling. The back gauge assembly is present with protective covers on the fingers and accordion-style bellows protecting the guide rails. These components show light dust and some surface scratches indicative of normal use but no significant damage.
The machine’s frame and surfaces exhibit minor signs of use and dust accumulation but appear structurally sound. Safety is addressed with visible warning labels on the machine. According to the nameplate, the press brake has a stroke of 265 mm, lubricant capacity of 250 liters, and dimensions of approximately 4600 mm in length, 2370 mm in width, and 2900 mm in height, with a total weight of 12,500 kg.
Overall, this Durma AD-S 30220 CNC press brake is a robust and well-equipped machine suitable for demanding metal forming tasks, combining substantial pressing power with advanced CNC control and essential tooling and back gauge components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2015 |
| Offers online | 8 |
| Last activity | June 16, 2026 |
Прес спирачка cnc/nc Durma AD-S 30220
Ohraňovací lis cnc/nc Durma AD-S 30220
Durma AD-S 30220 Trykbremse cnc/nc
Durma AD-S 30220 Abkantpresse CNC/NC
Πατήστε φρένο cnc/nc Durma AD-S 30220
Durma AD-S 30220 CNC Press Brake
Prensa plegadora cnc/nc Durma AD-S 30220
Presse-plieuse à cnc/nc Durma AD-S 30220
Press kočnica cnc/nc Durma AD-S 30220
Durma AD-S 30220 Nyomja meg a cnc/nc féket
Pressa piegatrice cnc/nc Durma AD-S 30220
Paspauskite stabdį cnc/nc Durma AD-S 30220
Durma AD-S 30220 Kantbank cnc/nc
Prasa krawędziowa CNC/NC Durma AD-S 30220
Prensa freio cnc/nc Durma AD-S 30220
Presa frana cnc/nc Durma AD-S 30220
Durma AD-S 30220 Листогибочный пресс с ЧПУ
Pritisnite kočnicu cnc/nc Durma AD-S 30220
Durma AD-S 30220 Tryckbroms cnc/nc
Cnc / NC abkant pres Durma AD-S 30220
EN
- Languages
English (GB)