Contact us to receive an offer.
| Manufacturer | Dugard |
|---|---|
| Model | EAGLE 850 VMC |
| Year | 2005 |
| Location | Czech Republic
|
This Dugard EAGLE 850 VMC is a vertical machining center designed for versatile milling operations. Manufactured in 2005, it features working travel ranges of 850 mm on the X-axis, 520 mm on the Y-axis, and 510 mm on the Z-axis, allowing for a wide range of machining capabilities. The machine is equipped with a robust table measuring 1000 mm in length and 510 mm in width, capable of supporting a maximum part weight of 500 kg.
The spindle offers a maximum speed of 8000 rpm, suitable for various machining tasks, and uses a BT40/CAT40 taper. The spindle-to-table distance is 660 mm, and the distance from bearing to spindle center is 585 mm, providing ample clearance for different part sizes. The feed rates for the X, Y, and Z axes are 30, 30, and 24 meters per minute respectively, facilitating efficient and precise machining cycles.
The machine is controlled by a SINUMERIK control system, which is mounted on the right side of the machine and includes a screen and multiple buttons, including an emergency stop button for operational safety. The vertical machining center features a blue and gray enclosure and is equipped with a signal tower light on the top right, which aids in monitoring machine status.
Additional technical specifications observed include an air requirement of 6 Kg/cm², a power supply of 400 VAC, and a power consumption of 15 KVA. The machine weighs approximately 5500 kg (12,100 lbs) and is made in Taiwan. The model number visible on the machine is 850VIC.
This machine is suitable for a variety of industrial milling applications where precision and reliability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is in good technical condition, can be tested under power.
Control System : SINUMERIK
Replaced X-bolt + nuts, bearings for new Replaced X and Y axis cover plates.
Machine description:
x, y, z ranges 850 x 520 x 510mm
Table size 1000 x 510mm
Max table load capacity 500 kg
Distance from spindle to table 660mm
Distance from bearing to spindle centre 585mm x/y/z speed feeds 30/30/24 m/min
Speed range 80-8000 rpm (10k/12k/15k opt)
Spindle taper 40 bt/cat Max.
1000X510 mm table clamping area.
The machine is in good technical condition, can be tested under power.
Control system : SINUMERIK
Replaced X-bolt + nuts, bearings for new Replaced X and Y axis cover plates.
Machine description:
x, y, z ranges 850 x 520 x 510mm
Table size 1000 x 510mm
Max table load capacity 500 kg
Distance from spindle to table 660mm
Distance from bearing to spindle centre 585mm x/y/z speed feeds 30/30/24 m/min
Speed range 80-8000 rpm (10k/12k/15k opt)
Spindle taper 40 bt/cat Max.
1000X510 mm table clamping area.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 14, 2026 |
The machine is in good technical condition, can be tested under power.
Control System : SINUMERIK
Replaced X-bolt + nuts, bearings for new Replaced X and Y axis cover plates.
Machine description:
x, y, z ranges 850 x 520 x 510mm
Table size 1000 x 510mm
Max table load capacity 500 kg
Distance from spindle to table 660mm
Distance from bearing to spindle centre 585mm x/y/z speed feeds 30/30/24 m/min
Speed range 80-8000 rpm (10k/12k/15k opt)
Spindle taper 40 bt/cat Max.
1000X510 mm table clamping area.
The machine is in good technical condition, can be tested under power.
Control system : SINUMERIK
Replaced X-bolt + nuts, bearings for new Replaced X and Y axis cover plates.
Machine description:
x, y, z ranges 850 x 520 x 510mm
Table size 1000 x 510mm
Max table load capacity 500 kg
Distance from spindle to table 660mm
Distance from bearing to spindle centre 585mm x/y/z speed feeds 30/30/24 m/min
Speed range 80-8000 rpm (10k/12k/15k opt)
Spindle taper 40 bt/cat Max.
1000X510 mm table clamping area.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Dugard EAGLE 850 VMC is a vertical machining center designed for versatile milling operations. Manufactured in 2005, it features working travel ranges of 850 mm on the X-axis, 520 mm on the Y-axis, and 510 mm on the Z-axis, allowing for a wide range of machining capabilities. The machine is equipped with a robust table measuring 1000 mm in length and 510 mm in width, capable of supporting a maximum part weight of 500 kg.
The spindle offers a maximum speed of 8000 rpm, suitable for various machining tasks, and uses a BT40/CAT40 taper. The spindle-to-table distance is 660 mm, and the distance from bearing to spindle center is 585 mm, providing ample clearance for different part sizes. The feed rates for the X, Y, and Z axes are 30, 30, and 24 meters per minute respectively, facilitating efficient and precise machining cycles.
The machine is controlled by a SINUMERIK control system, which is mounted on the right side of the machine and includes a screen and multiple buttons, including an emergency stop button for operational safety. The vertical machining center features a blue and gray enclosure and is equipped with a signal tower light on the top right, which aids in monitoring machine status.
Additional technical specifications observed include an air requirement of 6 Kg/cm², a power supply of 400 VAC, and a power consumption of 15 KVA. The machine weighs approximately 5500 kg (12,100 lbs) and is made in Taiwan. The model number visible on the machine is 850VIC.
This machine is suitable for a variety of industrial milling applications where precision and reliability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 14, 2026 |
Обработващ център - вертикален Dugard EAGLE 850 VMC
Obráběcí centrum - vertikální Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Bearbejdningscenter - lodret
Dugard EAGLE 850 VMC Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Machining center - vertical
Centro de mecanizado vertical Dugard EAGLE 850 VMC
Centre d'usinage vertical Dugard EAGLE 850 VMC
Obradni centar - vertikalni Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Megmunkáló központ - függőleges
Centro di lavoro verticale Dugard EAGLE 850 VMC
Apdirbimo centras – vertikalus Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Dugard EAGLE 850 VMC
Centro de usinagem - vertical Dugard EAGLE 850 VMC
Centru de prelucrare - vertical Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Вертикальный обрабатывающий центр
Obradni centar - vertikalni Dugard EAGLE 850 VMC
Dugard EAGLE 850 VMC Bearbetningscentrum - vertikalt
Dikey işleme merkezi Dugard EAGLE 850 VMC
EN
- Languages
English (GB)