DOOSAN PUMA MX3100 CNC lathe

Top seller

Price on request

View price
Manufacturer DOOSAN
Model PUMA MX3100
Year 2012
Location Italy IT

Specifications

Category Lathes - CNC lathes
Turning length 1500 mm
Turning Ø 760 mm
Ø above the bed 1000 mm
Ø above transversing slide  mm
Length between centers 1500 mm
Type of CNC
X-axis 630 mm
Z-axis 1585 mm
Max workpiece weight 400 kg
Spindle taper
Spindle bore 115 mm
Number of turrets
Number of tools on turret
Number of rotating tools
Turning speed 12000 rpm
Spindle motor power 30 kW
Tailstock no
Bar feeder no
Length x width x height - × - × -
Weight 15200 kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Doosan Puma MX3100
Last availability date 15/11/2026
Product id P260923222
Language

Automatic description (AI-Generated)

DOOSAN PUMA MX3100S — 7-axis horizontal turning center (manufactured 2012). This machine is configured for heavy-duty and multi-function turning/milling with an orientable milling head and counter spindle capability. Key features and specifications:

- Manufacturer / Model: DOOSAN PUMA MX3100 (2012)
- Axes: 7
- Machine weight: 15,200 kg
- Turning capacity: maximum turning diameter 760 mm; maximum swing over bed 1,000 mm; turning length between centers 1,500 mm; max turning length between centres 1,500 mm
- Max supported workpiece weight (left): 400 kg (right spindle capacity lower as specified)
- Spindle bore (left main): 115 mm (draw tube ID 103 mm)
- Orientable upper head: Capto C6 spindle interface (double-contact), speed range 60–12,000 rpm, with built-in motor and air sensor for tool clamping confirmation
- Spindle motor power: 30 kW (listed)
- Counter/spindle (sub): right spindle features and power ranges are included in the machine specification
- Tooling and turret: floor-mounted double-arm automatic tool changer, long-Z movable magazine, Capto C6 taper; 40 tool stations; max tool diameters 130 mm (adjacent empty) / 90 mm (adjacent occupied); max tool length 400 mm; tool-to-tool time 1.8 s, chip-to-chip 10 s
- Axis travels: X 630 mm, Y 230 mm, Z 1,585 mm; A (right spindle translation) 1,550 mm
- Feed/rapid rates and other motion data are included in the full specification (high-speed interpolation, A/B/C axis capabilities, and UP TO 4-axis simultaneous machining with FANUC 31i-A)
- Control and electronics: FANUC 31i-A CNC, 10.4" colour LCD, Manual Guide-i conversational programming, electronic handwheel, multiple interpolation and macro features, interfaces including RS-232C, Memory Card slot and Ethernet
- Coolant, lubrication and ancillary systems: high-pressure coolant through upper spindle (12 bar), external coolant to upper spindle (8 bar), coolant tank 580 L, automatic lubrication, centralized hydraulic system, electrical cabinet heat exchanger, work area lighting, three-colour alarm lamp
- Standard extras noted in the specification: hinged-type chip conveyor (right-hand discharge), rigid tapping, spindle synchronization between left and right spindles

Condition and operation status are not specified in the provided documentation. All technical values above are taken from the supplied specifications and description. Prospective buyers should verify machine condition, accessories, and exact configuration before purchase.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details.Bed: Cast iron with linear roller guides on all axes

Left spindle (main)
Spindle nose: ASA A2-11

Chuck: Hydraulic 3-jaw, Ø315 mm

Max available power from: 238 rpm

Max torque: 1,003 / 1,203 Nm

Built-in spindle motor; front bearing Ø160 mm

Spindle bore: 115 mm; draw tube ID: 103 mm

C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle locking

Right spindle (sub)
Spindle nose: ASA A2-8

Chuck: Hydraulic 3-jaw, Ø254 mm

Speed: 40–4,000 rpm

Motor power (low/high electronic range): 15/22 kW | 22/26 kW

Max available power from: 450 rpm

Max torque: 398 / 539 / 700 Nm

Built-in spindle motor; front bearing Ø130 mm

Spindle bore: 86 mm; draw tube ID: 77 mm

C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle locking

Axis travels
B (upper turret rotation): 240° (±120°)

A (right spindle translation): 1,550 mm

C1/C2 (spindle rotation): ±360°

Rapid traverse / feeds
X1 / Z1 / Y: 36 / 36 / 26 m/min

A axis: 30 m/min

B-axis rotation: 42 rpm

C1 / C2 axes: 400 rpm

X1/Z1 interpolation feed: up to 500 mm/rev

Orientable upper turret / milling spindle
B-axis driven orientable head with Roller Gear Cam (RGC)

Machining on either left or right spindle

B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A

Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30°

Spindle interface: Capto C6 (double-contact)

Speed: 60–12,000 rpm

Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW

Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm

Built-in motor; air sensor for tool clamping confirmation

Centralized cooling system; rigid tapping

Automatic tool changer
Type: Floor-mounted, double-arm; long-Z movable magazine

Drives: Servo-driven tool-change arm and tool-chain rotation

Taper: Capto C6

Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s

Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied)

Max tool length: 400 mm

Machining capacity
Max swing over bed: 1,000 mm

Max swing over carriage: 700 mm

Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined)

Max turning length between centres: 1,500 mm

Max distance between spindle noses: 1,540 mm

Y-axis through-hole capacity: Ø230 mm (±115 mm)

Max bar capacity: left Ø102 mm; right Ø76 mm

Max unsupported workpiece weight: left 400 kg; right 220 kg

Coolant and standard equipment
High-pressure coolant through upper spindle: 12 bar

External coolant to upper spindle: 8 bar

Coolant tank capacity: 580 litres

Automatic lubrication system

Centralized hydraulic system with high-efficiency cooler

Electrical cabinet with heat exchanger

Work area lighting; 3-colour alarm/status lamp

Installation equipment; CE conformity declaration

FANUC 31i-A CNC features
10.4" colour LCD; extended keyboard

Manual Guide-i conversational programming

Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Electronic handwheel: fixed and portable

Tool compensation: 499 pairs

Constant surface speed; rigid tapping

Polar/cylindrical/helical interpolation; 3D coordinate conversion

FANUC Custom Macro B; 10 levels subprogram nesting

Program memory: 512 KB; up to 1,000 programs

Interfaces: RS-232C, Memory Card slot, Ethernet

Spindle synchronization between left and right spindles

Additional equipment

Chip conveyor: hinged type, right-hand discharge

Control Brand: FANUC
Counter Spindle: yes
Driven Tools: yes
Machine Weight: 15200 kg
Number of Axes: 7
Tool Stations: 40
Spindle Power: 30 kW
Spindle Speed: 3000 RPM
X-axis Travel: 630 mm
Y-axis Travel: 230 mm
Z-axis Travel: 1585 mm

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Machinery dealer
Active since 2019
Offers online 2058
Last activity Nov. 16, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Seller's description

This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details.Bed: Cast iron with linear roller guides on all axes

Left spindle (main)
Spindle nose: ASA A2-11

Chuck: Hydraulic 3-jaw, Ø315 mm

Max available power from: 238 rpm

Max torque: 1,003 / 1,203 Nm

Built-in spindle motor; front bearing Ø160 mm

Spindle bore: 115 mm; draw tube ID: 103 mm

C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle locking

Right spindle (sub)
Spindle nose: ASA A2-8

Chuck: Hydraulic 3-jaw, Ø254 mm

Speed: 40–4,000 rpm

Motor power (low/high electronic range): 15/22 kW | 22/26 kW

Max available power from: 450 rpm

Max torque: 398 / 539 / 700 Nm

Built-in spindle motor; front bearing Ø130 mm

Spindle bore: 86 mm; draw tube ID: 77 mm

C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle locking

Axis travels
B (upper turret rotation): 240° (±120°)

A (right spindle translation): 1,550 mm

C1/C2 (spindle rotation): ±360°

Rapid traverse / feeds
X1 / Z1 / Y: 36 / 36 / 26 m/min

A axis: 30 m/min

B-axis rotation: 42 rpm

C1 / C2 axes: 400 rpm

X1/Z1 interpolation feed: up to 500 mm/rev

Orientable upper turret / milling spindle
B-axis driven orientable head with Roller Gear Cam (RGC)

Machining on either left or right spindle

B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A

Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30°

Spindle interface: Capto C6 (double-contact)

Speed: 60–12,000 rpm

Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW

Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm

Built-in motor; air sensor for tool clamping confirmation

Centralized cooling system; rigid tapping

Automatic tool changer
Type: Floor-mounted, double-arm; long-Z movable magazine

Drives: Servo-driven tool-change arm and tool-chain rotation

Taper: Capto C6

Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s

Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied)

Max tool length: 400 mm

Machining capacity
Max swing over bed: 1,000 mm

Max swing over carriage: 700 mm

Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined)

Max turning length between centres: 1,500 mm

Max distance between spindle noses: 1,540 mm

Y-axis through-hole capacity: Ø230 mm (±115 mm)

Max bar capacity: left Ø102 mm; right Ø76 mm

Max unsupported workpiece weight: left 400 kg; right 220 kg

Coolant and standard equipment
High-pressure coolant through upper spindle: 12 bar

External coolant to upper spindle: 8 bar

Coolant tank capacity: 580 litres

Automatic lubrication system

Centralized hydraulic system with high-efficiency cooler

Electrical cabinet with heat exchanger

Work area lighting; 3-colour alarm/status lamp

Installation equipment; CE conformity declaration

FANUC 31i-A CNC features
10.4" colour LCD; extended keyboard

Manual Guide-i conversational programming

Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Electronic handwheel: fixed and portable

Tool compensation: 499 pairs

Constant surface speed; rigid tapping

Polar/cylindrical/helical interpolation; 3D coordinate conversion

FANUC Custom Macro B; 10 levels subprogram nesting

Program memory: 512 KB; up to 1,000 programs

Interfaces: RS-232C, Memory Card slot, Ethernet

Spindle synchronization between left and right spindles

Additional equipment

Chip conveyor: hinged type, right-hand discharge

Control Brand: FANUC
Counter Spindle: yes
Driven Tools: yes
Machine Weight: 15200 kg
Number of Axes: 7
Tool Stations: 40
Spindle Power: 30 kW
Spindle Speed: 3000 RPM
X-axis Travel: 630 mm
Y-axis Travel: 230 mm
Z-axis Travel: 1585 mm

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Specifications

Category Lathes - CNC lathes
Turning length 1500 mm
Turning Ø 760 mm
Ø above the bed 1000 mm
Ø above transversing slide  mm
Length between centers 1500 mm
Type of CNC
X-axis 630 mm
Z-axis 1585 mm
Max workpiece weight 400 kg
Spindle taper
Spindle bore 115 mm
Number of turrets
Number of tools on turret
Number of rotating tools
Turning speed 12000 rpm
Spindle motor power 30 kW
Tailstock no
Bar feeder no
Length x width x height - × - × -
Weight 15200 kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Doosan Puma MX3100
Last availability date 15/11/2026
Product id P260923222
Language

Automatic description (AI-Generated)

DOOSAN PUMA MX3100S — 7-axis horizontal turning center (manufactured 2012). This machine is configured for heavy-duty and multi-function turning/milling with an orientable milling head and counter spindle capability. Key features and specifications:

- Manufacturer / Model: DOOSAN PUMA MX3100 (2012)
- Axes: 7
- Machine weight: 15,200 kg
- Turning capacity: maximum turning diameter 760 mm; maximum swing over bed 1,000 mm; turning length between centers 1,500 mm; max turning length between centres 1,500 mm
- Max supported workpiece weight (left): 400 kg (right spindle capacity lower as specified)
- Spindle bore (left main): 115 mm (draw tube ID 103 mm)
- Orientable upper head: Capto C6 spindle interface (double-contact), speed range 60–12,000 rpm, with built-in motor and air sensor for tool clamping confirmation
- Spindle motor power: 30 kW (listed)
- Counter/spindle (sub): right spindle features and power ranges are included in the machine specification
- Tooling and turret: floor-mounted double-arm automatic tool changer, long-Z movable magazine, Capto C6 taper; 40 tool stations; max tool diameters 130 mm (adjacent empty) / 90 mm (adjacent occupied); max tool length 400 mm; tool-to-tool time 1.8 s, chip-to-chip 10 s
- Axis travels: X 630 mm, Y 230 mm, Z 1,585 mm; A (right spindle translation) 1,550 mm
- Feed/rapid rates and other motion data are included in the full specification (high-speed interpolation, A/B/C axis capabilities, and UP TO 4-axis simultaneous machining with FANUC 31i-A)
- Control and electronics: FANUC 31i-A CNC, 10.4" colour LCD, Manual Guide-i conversational programming, electronic handwheel, multiple interpolation and macro features, interfaces including RS-232C, Memory Card slot and Ethernet
- Coolant, lubrication and ancillary systems: high-pressure coolant through upper spindle (12 bar), external coolant to upper spindle (8 bar), coolant tank 580 L, automatic lubrication, centralized hydraulic system, electrical cabinet heat exchanger, work area lighting, three-colour alarm lamp
- Standard extras noted in the specification: hinged-type chip conveyor (right-hand discharge), rigid tapping, spindle synchronization between left and right spindles

Condition and operation status are not specified in the provided documentation. All technical values above are taken from the supplied specifications and description. Prospective buyers should verify machine condition, accessories, and exact configuration before purchase.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2019
Offers online 2058
Last activity Nov. 16, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Here is a selection of similar machines - DOOSAN PUMA MX3100


Used CNC Lathes in Italy for Sale

Browse used CNC lathes located in Italy on Exapro, from Biglia turning centres to Mazak, Okuma, Doosan and DMG Mori lathes used by valve, fitting and automotive subcontractors. Filter by swing, bar capacity and driven tools to source turning capacity.

DOOSAN PUMA MX3100 CNC lathe