Contact us to receive an offer.
| Manufacturer | Doosan |
|---|---|
| Model | DNM350-5AX |
| Year | 2012 |
| Location | United Kingdom
|
This Doosan DNM350-5AX is a vertical 5-axis machining center manufactured in 2012, designed for versatile and precise machining operations. It features a robust machine structure with dimensions of 3209 mm in length, 3150 mm in width, and 3190 mm in height, and weighs 8500 kg. The machine provides a working envelope with X, Y, and Z axis travels measuring 600 mm, 655 mm, and 500 mm respectively, allowing for the machining of parts up to 250 kg in weight. The table size is 350 mm by 350 mm, capable of rotating at speeds up to 30 rpm, supporting complex multi-axis machining tasks. Equipped with a powerful spindle motor rated at 18.5 kW, the spindle can reach speeds up to 12,000 rpm with a BT40 taper, enabling efficient material removal and high-speed cutting. The machine features a 30-station tool changer with a tool change time of 3.7 seconds, accommodating tools up to 76 mm in diameter (125 mm with adjacent pockets empty), 270 mm in length, and 8 kg in weight. Rapid feed rates are 36 m/min for X and Y axes and 30 m/min for Z axis, with a maximum cutting feed rate of 15,000 mm/min. The FANUC i Series control system manages the A axis rotation from +30 to -120 degrees and the C axis with 360 degrees rotation in 0.001-degree increments, allowing for complex 5-axis machining. The exterior of the machine is clean and well-maintained with no visible damage. Safety signage indicates that eye protection is required when operating the machine. Maintenance sheets and daily checklists are attached to the machine, supporting proper upkeep and operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
A axis
+30 ~ -120 degrees
C axis
0.001 degrees (360 degrees total)
Control
FANUC i Series
Machine Dimensions
3209 x 3150 x 3190mm
Machine Weight
8500kg
Maximum Cutting Feedrate
15,000mm/minute
Maximum Tool Diameter
76mm
Maximum Tool Diameter with Empty Adjacent Pockets
125mm
Maximum Tool Length
270mm
Maximum Tool Weight
8kg
Maximum workpiece weight
250mm
Min - Max Height under Spindle
50 ~ 550mm
Rapid Feedrates
XYZ: 36 x 36 x 30m/minute
Spindle Motor Power
18.5/11kW
Spindle Speed
12000rpm
Spindle Taper
BT40
Table Rotational Speed
30rpm
Table Size
350mm
Tool Change Capacity
30 Station
Tool Change Time (Chip to Chip)
3.7 seconds
Traverses XYZ
600 x 655 x 500mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the XYZ traverses of this Doosan DNM350-5AX?
This Doosan DNM350-5AX vertical machining center has XYZ traverses of 600 x 655 x 500 mm.
What is the diameter of the table on the machine?
This Doosan DNM350-5AX features a 350 mm diameter table.
What is the maximum table weight for this model?
The maximum table weight for this Doosan DNM350-5AX is 250 kg.
What is the A axis table tilt range of this machining center?
This Doosan DNM350-5AX has an A axis table tilt of +30° and -120°.
What is the C axis rotation capability of this model?
This Doosan DNM350-5AX offers a C axis rotation of 360 degrees.
What is the motor power of this Doosan DNM350-5AX?
This Doosan DNM350-5AX is powered by an 18.5 kW motor.
What is the maximum spindle speed of this machining center?
This Doosan DNM350-5AX has a maximum spindle speed of 12,000 rpm.
What type of spindle taper does this model have?
This Doosan DNM350-5AX is equipped with a BT40 spindle taper.
How many stations does the tool changer on the machine have?
This Doosan DNM350-5AX includes a 30 station tool changer.
What control system is used in this Doosan DNM350-5AX?
This Doosan DNM350-5AX is controlled by a Fanuc I series control system.
Is a swarf conveyor included with this model?
This Doosan DNM350-5AX comes with a swarf conveyor.
What year was this Doosan DNM350-5AX manufactured?
This Doosan DNM350-5AX was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 179 |
| Last activity | Oct. 29, 2026 |
A axis
+30 ~ -120 degrees
C axis
0.001 degrees (360 degrees total)
Control
FANUC i Series
Machine Dimensions
3209 x 3150 x 3190mm
Machine Weight
8500kg
Maximum Cutting Feedrate
15,000mm/minute
Maximum Tool Diameter
76mm
Maximum Tool Diameter with Empty Adjacent Pockets
125mm
Maximum Tool Length
270mm
Maximum Tool Weight
8kg
Maximum workpiece weight
250mm
Min - Max Height under Spindle
50 ~ 550mm
Rapid Feedrates
XYZ: 36 x 36 x 30m/minute
Spindle Motor Power
18.5/11kW
Spindle Speed
12000rpm
Spindle Taper
BT40
Table Rotational Speed
30rpm
Table Size
350mm
Tool Change Capacity
30 Station
Tool Change Time (Chip to Chip)
3.7 seconds
Traverses XYZ
600 x 655 x 500mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the XYZ traverses of this Doosan DNM350-5AX?
This Doosan DNM350-5AX vertical machining center has XYZ traverses of 600 x 655 x 500 mm.
What is the diameter of the table on the machine?
This Doosan DNM350-5AX features a 350 mm diameter table.
What is the maximum table weight for this model?
The maximum table weight for this Doosan DNM350-5AX is 250 kg.
What is the A axis table tilt range of this machining center?
This Doosan DNM350-5AX has an A axis table tilt of +30° and -120°.
What is the C axis rotation capability of this model?
This Doosan DNM350-5AX offers a C axis rotation of 360 degrees.
What is the motor power of this Doosan DNM350-5AX?
This Doosan DNM350-5AX is powered by an 18.5 kW motor.
What is the maximum spindle speed of this machining center?
This Doosan DNM350-5AX has a maximum spindle speed of 12,000 rpm.
What type of spindle taper does this model have?
This Doosan DNM350-5AX is equipped with a BT40 spindle taper.
How many stations does the tool changer on the machine have?
This Doosan DNM350-5AX includes a 30 station tool changer.
What control system is used in this Doosan DNM350-5AX?
This Doosan DNM350-5AX is controlled by a Fanuc I series control system.
Is a swarf conveyor included with this model?
This Doosan DNM350-5AX comes with a swarf conveyor.
What year was this Doosan DNM350-5AX manufactured?
This Doosan DNM350-5AX was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Doosan DNM350-5AX is a vertical 5-axis machining center manufactured in 2012, designed for versatile and precise machining operations. It features a robust machine structure with dimensions of 3209 mm in length, 3150 mm in width, and 3190 mm in height, and weighs 8500 kg. The machine provides a working envelope with X, Y, and Z axis travels measuring 600 mm, 655 mm, and 500 mm respectively, allowing for the machining of parts up to 250 kg in weight. The table size is 350 mm by 350 mm, capable of rotating at speeds up to 30 rpm, supporting complex multi-axis machining tasks. Equipped with a powerful spindle motor rated at 18.5 kW, the spindle can reach speeds up to 12,000 rpm with a BT40 taper, enabling efficient material removal and high-speed cutting. The machine features a 30-station tool changer with a tool change time of 3.7 seconds, accommodating tools up to 76 mm in diameter (125 mm with adjacent pockets empty), 270 mm in length, and 8 kg in weight. Rapid feed rates are 36 m/min for X and Y axes and 30 m/min for Z axis, with a maximum cutting feed rate of 15,000 mm/min. The FANUC i Series control system manages the A axis rotation from +30 to -120 degrees and the C axis with 360 degrees rotation in 0.001-degree increments, allowing for complex 5-axis machining. The exterior of the machine is clean and well-maintained with no visible damage. Safety signage indicates that eye protection is required when operating the machine. Maintenance sheets and daily checklists are attached to the machine, supporting proper upkeep and operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 179 |
| Last activity | Oct. 29, 2026 |
Вертикален обработващ център Doosan DNM350-5AX
Vertikální obráběcí centrum Doosan DNM350-5AX
Doosan DNM350-5AX Lodret bearbejdningscenter
Doosan DNM350-5AX Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Doosan DNM350-5AX
Doosan DNM350-5AX Vertical machining center
Centro de mecanizado vertical Doosan DNM350-5AX
Centre d'usinage vertical Doosan DNM350-5AX
Vertikalni obradni centar Doosan DNM350-5AX
Doosan DNM350-5AX Függőleges megmunkáló központ
Centro di lavoro verticale Doosan DNM350-5AX
Doosan DNM350-5AX Vertikalus apdirbimo centras
Doosan DNM350-5AX Verticaal bewerkingscentrum
Pionowe centrum obróbcze Doosan DNM350-5AX
Centro de usinagem vertical Doosan DNM350-5AX
Centru de prelucrare vertical Doosan DNM350-5AX
Doosan DNM350-5AX Вертикальный обрабатывающий центр
Vertikalni obradni centar Doosan DNM350-5AX
Doosan DNM350-5AX Vertikalt bearbetningscenter
Dikey işleme merkezi Doosan DNM350-5AX
EN
- Languages
English (GB)