| Manufacturer | DOOSAN |
|---|---|
| Model | DNM 750 |
| Year | 2024 |
| Location | Germany
|
DOOSAN DNM 750 II vertical machining centre, manufactured in 2024. This enclosed three-axis machine has X, Y and Z travels of 1,630 mm, 762 mm and 650 mm respectively. The T-slotted table measures 1,630 x 760 mm and has a stated maximum load capacity of 1,500 kg. Spindle speed is up to 12,000 rpm, with listed spindle motor power of 28 kW. The machine has a 30-position tool magazine and an SK40 spindle taper.
Equipment and features listed include a FANUC i-Series CNC control, through-spindle coolant, external coolant, a chip conveyor, a Renishaw OTS tool setter and a Renishaw OMP40-2 workpiece probe. The machine is prepared for a fourth axis with cabling and hydraulic lines installed. A mist extraction unit with ducting is mounted on top of the enclosure. The interior has coolant nozzles beside the spindle and a T-slotted table.
The machine dimensions are 3,480 x 3,850 x 3,170 mm (length x width x height), and its stated weight is 13,500 kg. The listing specifies that the magnetic clamping plate, vises and clamping strips are not included. The mounted workholding and fixture plates shown are therefore not offered with the machine. An optional Benz angle head is offered separately.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details.- Manufacturer: DN SOLUTIONS
- Model: DNM 750 II
- Year of Manufacture / Build Date: 12/2023
- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)
- Screen Size: 15" Touch Screen
- Operating Hours:
* Control On (STRG EIN): 299 h 5 min
* Operating Time / Run Time: 53 h 54 min 14 s
* Machining Time: 40 h 15 min 28 s
* Cycle Time: 0 h 0 m 0 s
- Travel X-Axis: 1,630 mm
- Travel Y-Axis: 762 mm
- Travel Z-Axis: 650 mm
- Table Size: 1,630 x 760 mm
- Table Surface: T-slots (5 - 125 x 18H8)
- Max. Workpiece Dimensions / Height: 725 mm
- Max. Table Load Capacity: 1,500 kg
- Distance Spindle Nose to Table Surface: 150 - 800 mm
- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min
- Max. Cutting Feedrate: 12,000 mm/min
- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms
- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW
- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm
- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm
- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm
- Spindle Speed Range: Up to 12,000 rpm
- Spindle Drive Type: Direct Connection (Type 2)
- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW
- Spindle Base Speed: 1,500 rpm
- Max. Spindle Torque: 159.3 Nm (S3 15%)
- Spindle Clamping Force: 7.35 kN
- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)
- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)
- Tool Storage Capacity: 30 tool stations
- Tool Selection Type: Memory Random
- Max. Tool Diameter (Continuous): 80 mm
- Max. Tool Diameter (Adjacent Pots Empty): 125 mm
- Max. Tool Length: 300 mm
- Max. Tool Weight: 8 kg
- Max. Tool Moment: 5.88 Nm
- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)
- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)
- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter
- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min
- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min
- Coolant Tank Capacity: 520 L
- Coolant Gun: Included (with separate pump 0.6 kW)
- Air Gun: Included
- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning
- Oil Skimmer: Belt type
- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.97% efficiency)
- Tool Measurement System: Renishaw OTS tool setter complete package (A-5401-2001)
- Workpiece Measurement System: Renishaw OMP40-2 optical workpiece probe complete package with shank and stylus (A-4071-2001, A-5000-3709, A-4071-0069, A-2015-7880)
- 4th Axis Preparation: Cabling and hydraulic lines installed (Factory ready)
- Chip Removal: Chip conveyor, hinged plate belt type, right-side discharge
- Portable MPG: Detachable electronic handwheel with enable switch (CE standard)
- CNC Options:
* AICC Contour Control / Look-Ahead (200 blocks look-ahead)
* Additional Macro Variables (#100-#199, #500-#999)
* Automatic Corner Deceleration / Corner Feed
* Cylindrical Interpolation / Surface Development
* Network Interface (Ethernet)
* Auto Power Off after Production End
* Tool Offset Memory Expansion
- Optional Accessory: Benz angle head / angular drilling head (offered separately)
- Electrical Power Supply: 3-Phase AC 380 V, 50/60 Hz, PE
- Power Consumption / Rated Capacity: 37.50 kVA
- Full Load Current: 56.98 A
- Interrupting Capacity: 5 kA
- Short Circuit Capacity: 10 kA
- Compressed Air Supply Required: 0.54 MPa, 250 NL/min
- Machine Dimensions (L x W x H): 3,480 x 3,850 x 3,170 mm
- Machine Net Weight: Approx. 13,500 kg
The magnetic clamping plate and vices/clamping strips are not for sale and are not included in the offer
Control Brand: FANUC
Control Model: i-Series
Machine Height: 3170 mm
Machine Length: 3480 mm
Machine Weight: 13500 kg
Machine Width: 3850 mm
Max. Tool Weight: 8 kg
Number of Axes: 3
Tool Stations: 30
Spindle Power: 28 kW
Spindle Speed: 12000 RPM
Table Length: 760 mm
Table Load: 1500 kg
Table Width: 1630 mm
Taper Size: SK 40
Through-spindle Coolant: yes
X-axis Travel: 1630 mm
Y-axis Travel: 762 mm
Z-axis Travel: 650 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details.- Manufacturer: DN SOLUTIONS
- Model: DNM 750 II
- Year of Manufacture / Build Date: 12/2023
- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)
- Screen Size: 15" Touch Screen
- Operating Hours:
* Control On (STRG EIN): 299 h 5 min
* Operating Time / Run Time: 53 h 54 min 14 s
* Machining Time: 40 h 15 min 28 s
* Cycle Time: 0 h 0 m 0 s
- Travel X-Axis: 1,630 mm
- Travel Y-Axis: 762 mm
- Travel Z-Axis: 650 mm
- Table Size: 1,630 x 760 mm
- Table Surface: T-slots (5 - 125 x 18H8)
- Max. Workpiece Dimensions / Height: 725 mm
- Max. Table Load Capacity: 1,500 kg
- Distance Spindle Nose to Table Surface: 150 - 800 mm
- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min
- Max. Cutting Feedrate: 12,000 mm/min
- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms
- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW
- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm
- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm
- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm
- Spindle Speed Range: Up to 12,000 rpm
- Spindle Drive Type: Direct Connection (Type 2)
- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW
- Spindle Base Speed: 1,500 rpm
- Max. Spindle Torque: 159.3 Nm (S3 15%)
- Spindle Clamping Force: 7.35 kN
- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)
- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)
- Tool Storage Capacity: 30 tool stations
- Tool Selection Type: Memory Random
- Max. Tool Diameter (Continuous): 80 mm
- Max. Tool Diameter (Adjacent Pots Empty): 125 mm
- Max. Tool Length: 300 mm
- Max. Tool Weight: 8 kg
- Max. Tool Moment: 5.88 Nm
- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)
- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)
- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter
- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min
- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min
- Coolant Tank Capacity: 520 L
- Coolant Gun: Included (with separate pump 0.6 kW)
- Air Gun: Included
- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning
- Oil Skimmer: Belt type
- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.97% efficiency)
- Tool Measurement System: Renishaw OTS tool setter complete package (A-5401-2001)
- Workpiece Measurement System: Renishaw OMP40-2 optical workpiece probe complete package with shank and stylus (A-4071-2001, A-5000-3709, A-4071-0069, A-2015-7880)
- 4th Axis Preparation: Cabling and hydraulic lines installed (Factory ready)
- Chip Removal: Chip conveyor, hinged plate belt type, right-side discharge
- Portable MPG: Detachable electronic handwheel with enable switch (CE standard)
- CNC Options:
* AICC Contour Control / Look-Ahead (200 blocks look-ahead)
* Additional Macro Variables (#100-#199, #500-#999)
* Automatic Corner Deceleration / Corner Feed
* Cylindrical Interpolation / Surface Development
* Network Interface (Ethernet)
* Auto Power Off after Production End
* Tool Offset Memory Expansion
- Optional Accessory: Benz angle head / angular drilling head (offered separately)
- Electrical Power Supply: 3-Phase AC 380 V, 50/60 Hz, PE
- Power Consumption / Rated Capacity: 37.50 kVA
- Full Load Current: 56.98 A
- Interrupting Capacity: 5 kA
- Short Circuit Capacity: 10 kA
- Compressed Air Supply Required: 0.54 MPa, 250 NL/min
- Machine Dimensions (L x W x H): 3,480 x 3,850 x 3,170 mm
- Machine Net Weight: Approx. 13,500 kg
The magnetic clamping plate and vices/clamping strips are not for sale and are not included in the offer
Control Brand: FANUC
Control Model: i-Series
Machine Height: 3170 mm
Machine Length: 3480 mm
Machine Weight: 13500 kg
Machine Width: 3850 mm
Max. Tool Weight: 8 kg
Number of Axes: 3
Tool Stations: 30
Spindle Power: 28 kW
Spindle Speed: 12000 RPM
Table Length: 760 mm
Table Load: 1500 kg
Table Width: 1630 mm
Taper Size: SK 40
Through-spindle Coolant: yes
X-axis Travel: 1630 mm
Y-axis Travel: 762 mm
Z-axis Travel: 650 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DOOSAN DNM 750 II vertical machining centre, manufactured in 2024. This enclosed three-axis machine has X, Y and Z travels of 1,630 mm, 762 mm and 650 mm respectively. The T-slotted table measures 1,630 x 760 mm and has a stated maximum load capacity of 1,500 kg. Spindle speed is up to 12,000 rpm, with listed spindle motor power of 28 kW. The machine has a 30-position tool magazine and an SK40 spindle taper.
Equipment and features listed include a FANUC i-Series CNC control, through-spindle coolant, external coolant, a chip conveyor, a Renishaw OTS tool setter and a Renishaw OMP40-2 workpiece probe. The machine is prepared for a fourth axis with cabling and hydraulic lines installed. A mist extraction unit with ducting is mounted on top of the enclosure. The interior has coolant nozzles beside the spindle and a T-slotted table.
The machine dimensions are 3,480 x 3,850 x 3,170 mm (length x width x height), and its stated weight is 13,500 kg. The listing specifies that the magnetic clamping plate, vises and clamping strips are not included. The mounted workholding and fixture plates shown are therefore not offered with the machine. An optional Benz angle head is offered separately.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DOOSAN DNM 750
Vertikální obráběcí centrum DOOSAN DNM 750
DOOSAN DNM 750 Lodret bearbejdningscenter
DOOSAN DNM 750 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DOOSAN DNM 750
DOOSAN DNM 750 Vertical machining center
Centro de mecanizado vertical DOOSAN DNM 750
Centre d'usinage vertical DOOSAN DNM 750
Vertikalni obradni centar DOOSAN DNM 750
DOOSAN DNM 750 Függőleges megmunkáló központ
Centro di lavoro verticale DOOSAN DNM 750
DOOSAN DNM 750 Vertikalus apdirbimo centras
DOOSAN DNM 750 Verticaal bewerkingscentrum
Pionowe centrum obróbcze DOOSAN DNM 750
Centro de usinagem vertical DOOSAN DNM 750
Centru de prelucrare vertical DOOSAN DNM 750
DOOSAN DNM 750 Вертикальный обрабатывающий центр
Vertikalni obradni centar DOOSAN DNM 750
DOOSAN DNM 750 Vertikalt bearbetningscenter
Dikey işleme merkezi DOOSAN DNM 750
EN
- Languages
English (GB)