Contact us to receive an offer.
| Manufacturer | DMG |
|---|---|
| Model | NLX 2500/1250 SY |
| Year | 2023 |
| Location | Belgium
|
CNC turning center with driven tools, a Y-axis and a counter-spindle. The machine was built in 2022 and, according to the product information, was installed and first used in February 2023. The operating-hours counter is reported to show 1,545 hours. The seller describes the machine as being in very good condition and states that it can be inspected in operation. It is listed as immediately available for delivery.
Included equipment and features:
- Subspindle and Y-axis
- Built-in motor turret with 12 tool stations
- Chip conveyor
- Manual in-machine tool presetter, pivoting type
- Manual removable in-machine tool presetter for spindle 2
- Standard built-in workpiece unloader
- Coolant system with increased pressure of 5 bar
The control is listed as Mitsubishi M730UM with CELOS and ERGOline Touch. The stated maximum spindle speed is 4,000 rpm for the main spindle and 5,000 rpm for the right spindle. Other listed specifications are a maximum turning length of 1,255 mm, swing over bed of 920 mm, swing over cross slide of 742 mm, chuck outer diameter of 254 mm, through-hole diameter of 81 mm and gripping diameter of 254 mm. Axis travel is listed as 260 mm on X, ±50 mm on Y and 1,345 mm on Z. The listed spindle 2 B-axis figure is 1,284 mm.
A set of tooling and tool holders may be available as an optional extra; availability is to be discussed. Further technical specifications are stated to be available in the attached document. Information supplied by the seller is not guaranteed and should be verified during inspection. A live video inspection may be arranged to help assess the machine before travel.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
turning centers
Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle.
This machine was built in 2022, but installed and first used in February 2023.
Only 1545 actual operating hours on the counter.
Including:
Subspindle and Y-axis
Built-in Motor Turret with 12 tool stations
Chip conveyor
Manual in-machine tool presetter (pivoting type)
Manual in-machine tool presetter (removable type) (Spindle 2)
Standard Workpiece Unloader (Built-ln Type)
Coolant system with increased pressure of 5 bar
Full technnical specifications available in the attached document.
Optional:
set of tooling and tool holders (availability is to be discussed)
This machine is in very good condition and can be inspected in operation in .
Immediately available for delivery.
Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
Cnc Control: Mitsubishi_M730UM with CELOS - ERGOline Touch
Max Spindle Speed Main Spindle: 4000 rpm
Max Spindle Speed Right Spindle: 5000 rpm
Maximum Turning Length Mm: 1255 mm
Swing Over Bed: 920 mm
Swing Over Cross Slide: 742 mm
Chuck Outer Diameter: 254 mm
Through Hole Diameter: 81 mm
Gripping Diameter: 254 mm
X Axis Travel: 260 mm
Y Axis Travel: ±50 mm
Z Axis Travel: 1345 mm
Spindle 2 B Axis: 1284 mm
Built In Motor Turret: 12 tool stations
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 10 |
| Last activity | Nov. 10, 2026 |
turning centers
Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle.
This machine was built in 2022, but installed and first used in February 2023.
Only 1545 actual operating hours on the counter.
Including:
Subspindle and Y-axis
Built-in Motor Turret with 12 tool stations
Chip conveyor
Manual in-machine tool presetter (pivoting type)
Manual in-machine tool presetter (removable type) (Spindle 2)
Standard Workpiece Unloader (Built-ln Type)
Coolant system with increased pressure of 5 bar
Full technnical specifications available in the attached document.
Optional:
set of tooling and tool holders (availability is to be discussed)
This machine is in very good condition and can be inspected in operation in .
Immediately available for delivery.
Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
Cnc Control: Mitsubishi_M730UM with CELOS - ERGOline Touch
Max Spindle Speed Main Spindle: 4000 rpm
Max Spindle Speed Right Spindle: 5000 rpm
Maximum Turning Length Mm: 1255 mm
Swing Over Bed: 920 mm
Swing Over Cross Slide: 742 mm
Chuck Outer Diameter: 254 mm
Through Hole Diameter: 81 mm
Gripping Diameter: 254 mm
X Axis Travel: 260 mm
Y Axis Travel: ±50 mm
Z Axis Travel: 1345 mm
Spindle 2 B Axis: 1284 mm
Built In Motor Turret: 12 tool stations
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
CNC turning center with driven tools, a Y-axis and a counter-spindle. The machine was built in 2022 and, according to the product information, was installed and first used in February 2023. The operating-hours counter is reported to show 1,545 hours. The seller describes the machine as being in very good condition and states that it can be inspected in operation. It is listed as immediately available for delivery.
Included equipment and features:
- Subspindle and Y-axis
- Built-in motor turret with 12 tool stations
- Chip conveyor
- Manual in-machine tool presetter, pivoting type
- Manual removable in-machine tool presetter for spindle 2
- Standard built-in workpiece unloader
- Coolant system with increased pressure of 5 bar
The control is listed as Mitsubishi M730UM with CELOS and ERGOline Touch. The stated maximum spindle speed is 4,000 rpm for the main spindle and 5,000 rpm for the right spindle. Other listed specifications are a maximum turning length of 1,255 mm, swing over bed of 920 mm, swing over cross slide of 742 mm, chuck outer diameter of 254 mm, through-hole diameter of 81 mm and gripping diameter of 254 mm. Axis travel is listed as 260 mm on X, ±50 mm on Y and 1,345 mm on Z. The listed spindle 2 B-axis figure is 1,284 mm.
A set of tooling and tool holders may be available as an optional extra; availability is to be discussed. Further technical specifications are stated to be available in the attached document. Information supplied by the seller is not guaranteed and should be verified during inspection. A live video inspection may be arranged to help assess the machine before travel.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 10 |
| Last activity | Nov. 10, 2026 |
| Turning length | 1000 mm |
|---|---|
| Type of CNC | |
| Tailstock | no |
| Turning Ø | 460 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
| Turning length | 800 mm |
|---|---|
| Ø above the bed | 550 mm |
| Length between centers | 900 mm |
| X-axis | 380 mm |
| Max workpiece weight | 900 kg |
| Spindle bore | 91 mm |
| Number of tools on turret | 16 |
| Turning speed | 3500 rpm |
| Turning Ø | 450 mm |
|---|---|
| Ø above transversing slide | 380 mm |
| Type of CNC | Fanuc 32i Plus |
| Z-axis | 800 mm |
| Spindle taper | ASA 8"' A2 |
| Number of turrets | 1 |
| Number of rotating tools | 16 |
| Spindle motor power | 42 kW |
Belgium
| Ø above the bed | 720 mm |
|---|---|
| Type of CNC | Siemens Sinumerik 840C |
| Z-axis | 1500 mm |
| Spindle bore | 110 mm |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Length between centers | 1500 mm |
|---|---|
| X-axis | 320 mm |
| Spindle taper | A2-11 |
| Number of tools on turret | 12 |
| Spindle motor power | 62 kW |
| Bar feeder | no |
| Ø above the bed | 560 mm |
|---|---|
| Length between centers | 3000 mm |
| Spindle taper | |
| Turning speed | 2500 rpm |
| Tailstock | no |
| Ø above transversing slide | 315 mm |
|---|---|
| Type of CNC | GE Fanuc |
| Spindle bore | 80 mm |
| Spindle motor power | 11 kW |
| Bar feeder | no |
| Type of CNC | 3D CNC |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Italy
1997
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
| Turning length | 1540 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 91 mm |
| Turning speed | 5000 rpm |
| Tailstock | yes |
| Ø above transversing slide | 660 mm |
|---|---|
| Spindle taper | Capto C6 |
| Number of tools on turret | 76 |
| Spindle motor power | 26 kW |
| Bar feeder | no |
| Turning length | 1014 mm |
|---|---|
| Ø above the bed | 465 mm |
| Length between centers | 1050 mm |
| X-axis | 300 mm |
| Spindle taper | |
| Number of tools on turret | 12 |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Turning Ø | 465 mm |
|---|---|
| Ø above transversing slide | 465 mm |
| Type of CNC | Siemens 810d shopturn |
| Z-axis | 1050 mm |
| Spindle bore | 76 mm |
| Number of rotating tools | 12 |
| Spindle motor power | 7.5 kW |
| Bar feeder | no |
Turkey
2012
| Turning length | 450 mm |
|---|---|
| Ø above transversing slide | 260 mm |
| X-axis | 182 mm |
| Spindle taper | VDI 30 |
| Number of tools on turret | 12 |
| Tailstock | no |
| Turning Ø | 200 mm |
|---|---|
| Type of CNC | Siemens 840 D |
| Z-axis | 465 mm |
| Spindle bore | 51 mm |
| Turning speed | 5000 rpm |
| Bar feeder | no |
Turkey
2011
| Turning length | 450 mm |
|---|---|
| Ø above the bed | 330 mm |
| Type of CNC | Siemens |
| Z-axis | 450 mm |
| Spindle bore | 52 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Tailstock | no |
| Turning Ø | 200 mm |
|---|---|
| Ø above transversing slide | 260 mm |
| X-axis | 160 mm |
| Spindle taper | |
| Number of turrets | 1 |
| Number of rotating tools | 10 |
| Spindle motor power | 11 kW |
| Bar feeder | no |
Slovakia
2026
| Turning length | 660 mm |
|---|---|
| Ø above the bed | 650 mm |
| Length between centers | 660 mm |
| X-axis | 260 mm |
| Spindle taper | A2-6 |
| Number of turrets | 1 |
| Number of rotating tools | 15 |
| Spindle motor power | 11 kW |
| Turning Ø | 400 mm |
|---|---|
| Ø above transversing slide | 360 mm |
| Type of CNC | SIEMENS 828D + Shopturn |
| Z-axis | 830 mm |
| Spindle bore | 66 mm |
| Number of tools on turret | 15 |
| Turning speed | 4200 rpm |
| Tailstock | yes |
Turkey
2011
| Turning length | 450 mm |
|---|---|
| Type of CNC | |
| Tailstock | no |
| Turning Ø | 200 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
Turkey
2009
| Turning length | 1050 mm |
|---|---|
| Ø above the bed | 465 mm |
| Length between centers | 1050 mm |
| X-axis | 300 mm |
| Spindle taper | |
| Number of tools on turret | 12 |
| Turning speed | 3250 rpm |
| Tailstock | no |
| Turning Ø | 465 mm |
|---|---|
| Ø above transversing slide | 465 mm |
| Type of CNC | Siemens |
| Z-axis | 1050 mm |
| Spindle bore | 76 mm |
| Number of rotating tools | 12 |
| Spindle motor power | 7.5 kW |
| Bar feeder | no |
Turkey
2017
| Turning Ø | 280 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
| Type of CNC | Haas |
|---|---|
| Tailstock | no |
Turkey
2010
| Turning length | 210 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
| Type of CNC | Siemens |
|---|---|
| Tailstock | no |
Turkey
2011
| Turning length | 450 mm |
|---|---|
| Ø above the bed | 330 mm |
| Type of CNC | Siemens |
| Z-axis | 450 mm |
| Spindle bore | 51 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Tailstock | no |
| Turning Ø | 200 mm |
|---|---|
| Ø above transversing slide | 260 mm |
| X-axis | 160 mm |
| Spindle taper | |
| Number of turrets | 1 |
| Number of rotating tools | 10 |
| Spindle motor power | 11 kW |
| Bar feeder | no |
Italy
2019
| Turning length | 1655 mm |
|---|---|
| Ø above the bed | 525 mm |
| Type of CNC | fanuc oitf |
| Spindle bore | 119 mm |
| Turning speed | 2500 rpm |
| Tailstock | no |
| Turning Ø | 520 mm |
|---|---|
| Ø above transversing slide | 520 mm |
| Spindle taper | |
| Number of tools on turret | 12 |
| Spindle motor power | 26 kW |
| Bar feeder | no |
Italy
2009
| Type of CNC | FANUC 18i-tb |
|---|---|
| Spindle bore | 65 mm |
| Number of tools on turret | 12 |
| Tailstock | no |
| Spindle taper | |
|---|---|
| Number of turrets | 1 |
| Number of rotating tools | 12 |
| Bar feeder | yes |
Italy
2011
| Turning length | 450 mm |
|---|---|
| Type of CNC | |
| Z-axis | 450 mm |
| Turning speed | 5000 rpm |
| Bar feeder | no |
| Turning Ø | 200 mm |
|---|---|
| X-axis | 160 mm |
| Spindle taper | |
| Tailstock | no |
Italy
2011
| Turning length | 450 mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | 160 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | 5000 rpm |
| Turning Ø | 200 mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | 450 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Italy
2006
| Turning length | 345 mm |
|---|---|
| Ø above the bed | 250 mm |
| Length between centers | 580 mm |
| X-axis | 220 mm |
| Spindle taper | |
| Number of turrets | 2 |
| Number of rotating tools | 12 |
| Spindle motor power | 20 kW |
| Turning Ø | 120 mm |
|---|---|
| Ø above transversing slide | 200 mm |
| Type of CNC | siemens 840 D |
| Z-axis | 320 mm |
| Spindle bore | 65 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Tailstock | yes |
Germany
2015
| Turning length | 100 mm |
|---|---|
| Spindle taper | |
| Spindle motor power | 15 kW |
| Bar feeder | no |
| Type of CNC | |
|---|---|
| Spindle bore | 45 mm |
| Tailstock | no |
Italy
2002
| Turning length | 500 mm |
|---|---|
| Type of CNC | |
| Z-axis | 32 mm |
| Spindle bore | 60 mm |
| Spindle motor power | 12 kW |
| Bar feeder | no |
| Turning Ø | 230 mm |
|---|---|
| X-axis | 160 mm |
| Spindle taper | ASA 5 |
| Number of tools on turret | 5000 |
| Tailstock | no |
Italy
2006
| Turning length | 345 mm |
|---|---|
| Ø above the bed | 250 mm |
| Length between centers | 900 mm |
| X-axis | 220 mm |
| Spindle taper | |
| Number of turrets | 2 |
| Number of rotating tools | 12 |
| Spindle motor power | 20 kW |
| Turning Ø | 100 mm |
|---|---|
| Ø above transversing slide | 200 mm |
| Type of CNC | SIEMENS 84 D |
| Z-axis | 320 mm |
| Spindle bore | 65 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Tailstock | yes |
Germany
2003
| Turning length | 1585 mm |
|---|---|
| Ø above the bed | 640 mm |
| Type of CNC | SINUMERIK 840 D |
| Z-axis | 1870 mm |
| Spindle taper | |
| Number of turrets | 1 |
| Spindle motor power | 13.2 kW |
| Bar feeder | no |
| Turning Ø | 390 mm |
|---|---|
| Length between centers | 400 mm |
| X-axis | 605 mm |
| Max workpiece weight | 10 kg |
| Spindle bore | 65 mm |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Turning length | 705 mm |
|---|---|
| Ø above the bed | 920 mm |
| Type of CNC | DMG MORI MAPPS |
| Z-axis | 795 mm |
| Spindle bore | 91 mm |
| Number of tools on turret | 12 |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Turning Ø | 366 mm |
|---|---|
| Length between centers | 799 mm |
| X-axis | 260 mm |
| Spindle taper | JIS A2-8 |
| Number of turrets | 1 |
| Number of rotating tools | 12 |
| Spindle motor power | 18.5 kW |
| Bar feeder | yes |
Italy
2004
| Turning Ø | 590 mm |
|---|---|
| Length between centers | 1000 mm |
| Spindle taper | |
| Turning speed | 1300 rpm |
| Tailstock | no |
| Ø above transversing slide | 320 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 85 mm |
| Spindle motor power | 20 kW |
| Bar feeder | no |
Germany
2014
| Turning length | 750 mm |
|---|---|
| Type of CNC | Fanuc Oi-Td |
| Number of tools on turret | 12 |
| Spindle motor power | 30 kW |
| Bar feeder | no |
| Turning Ø | 800 mm |
|---|---|
| Spindle taper | |
| Turning speed | 2000 rpm |
| Tailstock | no |
Germany
2017
| Turning length | 500 mm |
|---|---|
| Spindle taper | |
| Number of tools on turret | 16 |
| Spindle motor power | 34 kW |
| Bar feeder | no |
| Type of CNC | Heidenhain CNCpilot 640 |
|---|---|
| Spindle bore | 77 mm |
| Turning speed | 5000 rpm |
| Tailstock | no |
Germany
2000
| Turning length | 1000 mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | rpm |
| Turning Ø | 475 mm |
|---|---|
| Ø above transversing slide | 260 mm |
| Type of CNC | |
| Z-axis | mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
CNC струг DMG NLX 2500/1250 SY
CNC soustruh DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY CNC-drejebænk
DMG NLX 2500/1250 SY CNC-Drehmaschine
Τόρνος CNC DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY CNC lathe
Torno CNC DMG NLX 2500/1250 SY
Tour CNC DMG NLX 2500/1250 SY
CNC tokarski stroj DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY CNC esztergagép
Tornio CNC DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY CNC tekinimo staklės
DMG NLX 2500/1250 SY CNC-draaibank
Tokarka CNC DMG NLX 2500/1250 SY
Torno CNC DMG NLX 2500/1250 SY
Strung CNC DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY Токарный станок с ЧПУ
CNC strug DMG NLX 2500/1250 SY
DMG NLX 2500/1250 SY CNC-svarv
CNC torna DMG NLX 2500/1250 SY
Romania
Sweden
USA
EN
- Languages
English (GB)