| Manufacturer | DMG MORI |
|---|---|
| Model | UNO 20/40 |
| Year | 2014 |
| Location | Germany
|
| Category | Measure / Control - Measuring units |
| X-axis travel | 202.207 mm |
| Z-axis travel | 404.397 mm |
| Type of measurement | dimensional |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P261102143 |
| Language |
Мерна единица DMG MORI UNO 20/40
Měřící zařízení DMG MORI UNO 20/40
DMG MORI UNO 20/40 Måleenhed
DMG MORI UNO 20/40 Messbänk
Μονάδα μέτρησης DMG MORI UNO 20/40
DMG MORI UNO 20/40 Measuring unit
Banco de medida DMG MORI UNO 20/40
Outil de mesure DMG MORI UNO 20/40
Mjerna jedinica DMG MORI UNO 20/40
DMG MORI UNO 20/40 Mérőegység
Unità di misurazione DMG MORI UNO 20/40
DMG MORI UNO 20/40 Matavimo vienetas
DMG MORI UNO 20/40 Meeteenheid
Urządzenie pomiarowe DMG MORI UNO 20/40
Unidade de medida DMG MORI UNO 20/40
Unitate de masura DMG MORI UNO 20/40
DMG MORI UNO 20/40 Измерительное устройство
Merna jedinica DMG MORI UNO 20/40
DMG MORI UNO 20/40 Mätenhet
Ölçüm ünitesi DMG MORI UNO 20/40
|
DMG MORI UNO 20/40 optical measuring machine, manufactured in 2014, for dimensional measurement. The machine has an X-axis travel of 202.207 mm and a Z-axis travel of 404.397 mm. The listed travel ranges are -50.862 mm to 202.207 mm on the X-axis and 0.102 mm to 404.397 mm on the Z-axis. It is equipped with a manual SK50 spindle with vacuum clamping.
The listed operating requirements are 230 V electrical supply and pneumatic pressure of 6 to 8 bar, with a nominal pressure of 6 +/- 0.5 bar. Maximum power consumption is 650 VA. The machine uses Microvision Version V5.1.8.7 with German-language installation and Windows 7 in German. Installed postprocessors include Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840 and TNC.
Included accessories and equipment are SK50-to-HSK63 and SK50-to-SK40 reduction adapters, an SK50-to-SK50 adapter/calibration arbor, and a calibration arbor with listed dimensions L=74.98 mm, D=5.94 mm and R=2.97 mm. The listing also includes a Terra All-in-One PC with metal table stand and power supply; the PC is defective and does not boot. A USB flash drive with device data backup, USB keyboard and computer mouse are also listed. Four separate circular metal-and-black fixtures are shown on a holder.
Comprehensive service, geometry calibration and buffer battery replacement are listed as completed by HAIMER Microset on 21.10.2025. The beige unit has a white C-shaped measuring arm and circular fixture at the base. Visible surfaces and fixtures have minor scuffs, marks and light wear. The machine is pictured on a wooden pallet.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Optical measurement machine manufactured in 2014. This DMG MORI UNO 20/40 features a travel path of 202.207 mm on the X-axis and 404.397 mm on the Z-axis. It includes a manual SK50 spindle with vacuum clamping and comes with various optional reduction adapters. If you are looking to get high-quality optical measurement capabilities, consider the DMG MORI UNO 20/40 machine we have for sale. Contact us for further details.- Spindle Type: SK50 manual spindle with vacuum clamping
- Travel Path X-Axis (min / max): -50.862 mm / 202.207 mm
- Travel Path Z-Axis (min / max): 0.102 mm / 404.397 mm
- Operating Voltage (U): 230 V
- Power Consumption (Pmax): 650 VA
- Operating Pneumatic Pressure: min. 6 bar – max. 8 bar (Nominal: 6 +/- 0.5 bar)
- Software: Microvision Version V5.1.8.7 (Installed language: German)
- Operating System: Windows 7 (German)
- PC Hardware: Terra All-in-One PC (Serial No.: R3731075) – Note: Defective / Non-booting
- Installed Postprocessors: Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840, TNC
- Calibration / Plug Gauge: Calibration arbor SK50 (DMG Microset, ZTP-1898; L=74.98 mm, D=5.94 mm, R=2.97 mm)
- Optional Reduction Adapters:
* Adapter SK50 to HSK63
* Adapter SK50 to SK40
* Adapter / Calibration arbor SK50 to SK50
- Included Peripherals & Accessories:
* Terra All-in-One PC (defective) with metal table stand and power supply
* USB flash drive with complete device data backup
* Standard USB keyboards and computer mice
- Maintenance History: Comprehensive service, geometry calibration, and buffer battery replacement completed by HAIMER Microset on 21.10.2025
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Optical measurement machine manufactured in 2014. This DMG MORI UNO 20/40 features a travel path of 202.207 mm on the X-axis and 404.397 mm on the Z-axis. It includes a manual SK50 spindle with vacuum clamping and comes with various optional reduction adapters. If you are looking to get high-quality optical measurement capabilities, consider the DMG MORI UNO 20/40 machine we have for sale. Contact us for further details.- Spindle Type: SK50 manual spindle with vacuum clamping
- Travel Path X-Axis (min / max): -50.862 mm / 202.207 mm
- Travel Path Z-Axis (min / max): 0.102 mm / 404.397 mm
- Operating Voltage (U): 230 V
- Power Consumption (Pmax): 650 VA
- Operating Pneumatic Pressure: min. 6 bar – max. 8 bar (Nominal: 6 +/- 0.5 bar)
- Software: Microvision Version V5.1.8.7 (Installed language: German)
- Operating System: Windows 7 (German)
- PC Hardware: Terra All-in-One PC (Serial No.: R3731075) – Note: Defective / Non-booting
- Installed Postprocessors: Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840, TNC
- Calibration / Plug Gauge: Calibration arbor SK50 (DMG Microset, ZTP-1898; L=74.98 mm, D=5.94 mm, R=2.97 mm)
- Optional Reduction Adapters:
* Adapter SK50 to HSK63
* Adapter SK50 to SK40
* Adapter / Calibration arbor SK50 to SK50
- Included Peripherals & Accessories:
* Terra All-in-One PC (defective) with metal table stand and power supply
* USB flash drive with complete device data backup
* Standard USB keyboards and computer mice
- Maintenance History: Comprehensive service, geometry calibration, and buffer battery replacement completed by HAIMER Microset on 21.10.2025
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Measure / Control - Measuring units |
| X-axis travel | 202.207 mm |
| Z-axis travel | 404.397 mm |
| Type of measurement | dimensional |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P261102143 |
| Language |
Мерна единица DMG MORI UNO 20/40
Měřící zařízení DMG MORI UNO 20/40
DMG MORI UNO 20/40 Måleenhed
DMG MORI UNO 20/40 Messbänk
Μονάδα μέτρησης DMG MORI UNO 20/40
DMG MORI UNO 20/40 Measuring unit
Banco de medida DMG MORI UNO 20/40
Outil de mesure DMG MORI UNO 20/40
Mjerna jedinica DMG MORI UNO 20/40
DMG MORI UNO 20/40 Mérőegység
Unità di misurazione DMG MORI UNO 20/40
DMG MORI UNO 20/40 Matavimo vienetas
DMG MORI UNO 20/40 Meeteenheid
Urządzenie pomiarowe DMG MORI UNO 20/40
Unidade de medida DMG MORI UNO 20/40
Unitate de masura DMG MORI UNO 20/40
DMG MORI UNO 20/40 Измерительное устройство
Merna jedinica DMG MORI UNO 20/40
DMG MORI UNO 20/40 Mätenhet
Ölçüm ünitesi DMG MORI UNO 20/40
|
DMG MORI UNO 20/40 optical measuring machine, manufactured in 2014, for dimensional measurement. The machine has an X-axis travel of 202.207 mm and a Z-axis travel of 404.397 mm. The listed travel ranges are -50.862 mm to 202.207 mm on the X-axis and 0.102 mm to 404.397 mm on the Z-axis. It is equipped with a manual SK50 spindle with vacuum clamping.
The listed operating requirements are 230 V electrical supply and pneumatic pressure of 6 to 8 bar, with a nominal pressure of 6 +/- 0.5 bar. Maximum power consumption is 650 VA. The machine uses Microvision Version V5.1.8.7 with German-language installation and Windows 7 in German. Installed postprocessors include Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840 and TNC.
Included accessories and equipment are SK50-to-HSK63 and SK50-to-SK40 reduction adapters, an SK50-to-SK50 adapter/calibration arbor, and a calibration arbor with listed dimensions L=74.98 mm, D=5.94 mm and R=2.97 mm. The listing also includes a Terra All-in-One PC with metal table stand and power supply; the PC is defective and does not boot. A USB flash drive with device data backup, USB keyboard and computer mouse are also listed. Four separate circular metal-and-black fixtures are shown on a holder.
Comprehensive service, geometry calibration and buffer battery replacement are listed as completed by HAIMER Microset on 21.10.2025. The beige unit has a white C-shaped measuring arm and circular fixture at the base. Visible surfaces and fixtures have minor scuffs, marks and light wear. The machine is pictured on a wooden pallet.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
EN
- Languages
English (GB)