Contact us to receive an offer.
| Manufacturer | DMG |
|---|---|
| Model | DMU 40 Mono Block |
| Year | 2008 |
| Location | Netherlands
|
This DMG DMU 40 Mono Block 5-axis machining center, manufactured in 2008, features a robust design with a machine weight of 7000 kg. It offers a working envelope with travel distances of 450 mm on the X axis, 400 mm on the Y axis, and 400 mm on the Z axis, suitable for a wide range of precision machining tasks. The spindle is capable of reaching speeds up to 24,000 rpm and uses an HSK63A tool interface. The machine is equipped with a 16-pocket HSK63A tool changer, allowing for efficient tool management and reduced downtime during operations.
The control system is a Heidenhain Mill Plus V600, located on a control panel positioned to the right side of the machine, facilitating operator access and machine programming. The machining center includes a front protective enclosure with a large window and circular handle, providing safety while allowing good visibility into the machining area.
Inside the machining area, the spindle and tool holder are installed, along with a worktable that has a fixture mounted for securing workpieces. Vertical and horizontal guide rails are visible, supporting precise and stable movement during machining. Some metal chips and dirt are present inside the machining area, indicating previous use.
Additional features include a 40 bar internal cooling system and a 250-liter refrigerant tank to support temperature control during machining. A clamping conveyor is also part of the setup, aiding in chip removal and workspace cleanliness. The machine is currently located indoors in an industrial environment, with visible cables and hoses connected, along with hydraulic or coolant systems at the rear.
This DMG DMU 40 Mono Block is a versatile and well-equipped machining center suitable for complex 5-axis milling operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control: Heidenhain Mill Plus V600
X axis: 450 mm , Y axis: 400 mm , Z axis: 400 mm
Weight: 7000 kg
Other: 24000 rpm HSK63A , 16x HSK63A Changer , 40 bar internal cooling , 250 liters Refrigerant tank , clamping conveyor , Machine comes at the end of May !
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machining center is this DMG DMU 40 Mono Block?
This DMG DMU 40 Mono Block is a 5-axis machining center.
When was this equipment manufactured?
This equipment was manufactured in 2008.
What type of machining center is this DMG DMU 40 Mono Block?
This DMG DMU 40 Mono Block is a 5-axis machining center.
What year was this machining center manufactured?
This machining center was manufactured in the year 2008.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 63 |
| Last activity | Oct. 31, 2026 |
Control: Heidenhain Mill Plus V600
X axis: 450 mm , Y axis: 400 mm , Z axis: 400 mm
Weight: 7000 kg
Other: 24000 rpm HSK63A , 16x HSK63A Changer , 40 bar internal cooling , 250 liters Refrigerant tank , clamping conveyor , Machine comes at the end of May !
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machining center is this DMG DMU 40 Mono Block?
This DMG DMU 40 Mono Block is a 5-axis machining center.
When was this equipment manufactured?
This equipment was manufactured in 2008.
What type of machining center is this DMG DMU 40 Mono Block?
This DMG DMU 40 Mono Block is a 5-axis machining center.
What year was this machining center manufactured?
This machining center was manufactured in the year 2008.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This DMG DMU 40 Mono Block 5-axis machining center, manufactured in 2008, features a robust design with a machine weight of 7000 kg. It offers a working envelope with travel distances of 450 mm on the X axis, 400 mm on the Y axis, and 400 mm on the Z axis, suitable for a wide range of precision machining tasks. The spindle is capable of reaching speeds up to 24,000 rpm and uses an HSK63A tool interface. The machine is equipped with a 16-pocket HSK63A tool changer, allowing for efficient tool management and reduced downtime during operations.
The control system is a Heidenhain Mill Plus V600, located on a control panel positioned to the right side of the machine, facilitating operator access and machine programming. The machining center includes a front protective enclosure with a large window and circular handle, providing safety while allowing good visibility into the machining area.
Inside the machining area, the spindle and tool holder are installed, along with a worktable that has a fixture mounted for securing workpieces. Vertical and horizontal guide rails are visible, supporting precise and stable movement during machining. Some metal chips and dirt are present inside the machining area, indicating previous use.
Additional features include a 40 bar internal cooling system and a 250-liter refrigerant tank to support temperature control during machining. A clamping conveyor is also part of the setup, aiding in chip removal and workspace cleanliness. The machine is currently located indoors in an industrial environment, with visible cables and hoses connected, along with hydraulic or coolant systems at the rear.
This DMG DMU 40 Mono Block is a versatile and well-equipped machining center suitable for complex 5-axis milling operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 63 |
| Last activity | Oct. 31, 2026 |
5-осен обработващ център DMG DMU 40 Mono Block
5osé obráběcí centrum DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5-akset bearbejdningscenter
DMG DMU 40 Mono Block 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5-axis machining center
Centro de mecanizado de 5 ejes DMG DMU 40 Mono Block
Centre d'usinage 5 axes DMG DMU 40 Mono Block
5-osni obradni centar DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi DMG DMU 40 Mono Block
5 ašių apdirbimo centras DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe DMG DMU 40 Mono Block
Centro de maquinação de 5 eixos DMG DMU 40 Mono Block
Centru de prelucrare cu 5 axe DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5-осевой обрабатывающий центр
5-osni obradni centar DMG DMU 40 Mono Block
DMG DMU 40 Mono Block 5-axligt bearbetningscenter
5 eksenli işleme merkezi DMG DMU 40 Mono Block
EN
- Languages
English (GB)