| Manufacturer | DMG |
|---|---|
| Model | DMC 60 T RS 3 |
| Year | 2007 |
| Location | Germany
|
Universal machining center DMG DMC 60 T RS 3 with Siemens 840 D control. Machine build year: 2007. A new spindle was installed in 2025. The B-axis bearings have been renewed. A geometry check protocol is available. Additional replaced parts listed: new disc and new clamping ring.
Machine type and capabilities
- 5-axis simultaneous machining center (swivel-head configuration)
- B-axis travel: +30° / -120°
- C-axis (indexing/rotation present)
Axes travels
- X: 780 mm
- Y: 560 mm
- Z: 560 mm
Spindle and tooling
- Spindle speed specified: 12.000 1/min. (12,000 rpm)
- Tool holder: SK 40
- Tool magazine: chain magazine
- Number of tool positions: 180
- Maximum tool length listed: 315 mm
Workholding / rotary table
- NC rotary table / pallet system
- Pallet size: 630 x 500 mm
- Number of pallets: 5
Additional equipment and features
- Chip conveyor
- Coolant system
- Internal coolant (IKZ) rated at 40 bar
- Air through spindle center
- Roto Clear
Condition notes
- New spindle (2025) and renewed B-axis bearings are reported. A geometry protocol is available. New disc and new clamping ring are noted in the specification.
No further condition statements (e.g., tested, guaranteed, refurbished) are included beyond the items and documentation explicitly listed above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Universal Bearbeitungszentrum
Maschinentyp: DMG DMC 60 T RS 3
Steuerung: Siemens 840 D
Baujahr: 2007
Neue Spindel: 2025
Neue B-Achslager
Geometrieprotokoll vorhanden
Neue Scheibe
Neuer Klemmring
TECHNISCHE DATEN
5-Achsen-Simultan
Verfahrwege
X-Achse: 780 mm
Y-Achse: 560 mm
Z-Achse: 560 mm
B-Achse: +30 / -120°
C-Achse
Schwenkkopf
Drehzahlbereich: 12.000 1/min.
Werkzeugaufnahme: SK 40
Werkzeugwechsler: Kettenmagazin / chain magazine
Werkzeugplätze: 180
Werkzeuglänge: 315 mm
NC-Rundtisch
Palettengröße: 630 x 500 mm
Palettensystem
Anzahl der Paletten: 5
Ausstattungsmerkmale
Späneförderer
Kühlmittelanlage
Innenkühlung (IKZ): 40 bar
Luft durch Spindelmitte
Roto Clear
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 34 |
| Last activity | Nov. 2, 2026 |
Stenzel GmbH is a leading provider of precision CNC machining solutions based in Germany. With a commitment to excellence and innovation, Stenzel specializes in delivering high-quality components and assemblies tailored to meet the specific needs of various industries, including automotive, aerospace, and medical technology. Their state-of-the-art facilities are equipped with advanced machinery and technology, ensuring that every product meets the highest standards of quality and precision. What sets Stenzel apart is their dedication to customer satisfaction and their ability to adapt to the ever-evolving demands of the market. The company prides itself on its skilled workforce, which is trained to utilize the latest techniques in CNC machining. This expertise allows Stenzel to offer not only standard products but also customized solutions that cater to unique project requirements. Their focus on continuous improvement and innovation ensures that they remain at the forefront of the industry. In addition to their machining capabilities, Stenzel GmbH emphasizes sustainability and efficiency in their operations. By implementing eco-friendly practices and optimizing production processes, they strive to minimize their environmental impact while maximizing productivity. This commitment to sustainability resonates with clients who are looking for responsible partners in their supply chain. Overall, Stenzel GmbH stands as a reliable partner for businesses seeking high-quality CNC machining services. Their blend of advanced technology, skilled craftsmanship, and customer-centric approach makes them an ideal choice for companies looking to enhance their manufacturing capabilities.
Universal Bearbeitungszentrum
Maschinentyp: DMG DMC 60 T RS 3
Steuerung: Siemens 840 D
Baujahr: 2007
Neue Spindel: 2025
Neue B-Achslager
Geometrieprotokoll vorhanden
Neue Scheibe
Neuer Klemmring
TECHNISCHE DATEN
5-Achsen-Simultan
Verfahrwege
X-Achse: 780 mm
Y-Achse: 560 mm
Z-Achse: 560 mm
B-Achse: +30 / -120°
C-Achse
Schwenkkopf
Drehzahlbereich: 12.000 1/min.
Werkzeugaufnahme: SK 40
Werkzeugwechsler: Kettenmagazin / chain magazine
Werkzeugplätze: 180
Werkzeuglänge: 315 mm
NC-Rundtisch
Palettengröße: 630 x 500 mm
Palettensystem
Anzahl der Paletten: 5
Ausstattungsmerkmale
Späneförderer
Kühlmittelanlage
Innenkühlung (IKZ): 40 bar
Luft durch Spindelmitte
Roto Clear
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Universal machining center DMG DMC 60 T RS 3 with Siemens 840 D control. Machine build year: 2007. A new spindle was installed in 2025. The B-axis bearings have been renewed. A geometry check protocol is available. Additional replaced parts listed: new disc and new clamping ring.
Machine type and capabilities
- 5-axis simultaneous machining center (swivel-head configuration)
- B-axis travel: +30° / -120°
- C-axis (indexing/rotation present)
Axes travels
- X: 780 mm
- Y: 560 mm
- Z: 560 mm
Spindle and tooling
- Spindle speed specified: 12.000 1/min. (12,000 rpm)
- Tool holder: SK 40
- Tool magazine: chain magazine
- Number of tool positions: 180
- Maximum tool length listed: 315 mm
Workholding / rotary table
- NC rotary table / pallet system
- Pallet size: 630 x 500 mm
- Number of pallets: 5
Additional equipment and features
- Chip conveyor
- Coolant system
- Internal coolant (IKZ) rated at 40 bar
- Air through spindle center
- Roto Clear
Condition notes
- New spindle (2025) and renewed B-axis bearings are reported. A geometry protocol is available. New disc and new clamping ring are noted in the specification.
No further condition statements (e.g., tested, guaranteed, refurbished) are included beyond the items and documentation explicitly listed above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 34 |
| Last activity | Nov. 2, 2026 |
Stenzel GmbH is a leading provider of precision CNC machining solutions based in Germany. With a commitment to excellence and innovation, Stenzel specializes in delivering high-quality components and assemblies tailored to meet the specific needs of various industries, including automotive, aerospace, and medical technology. Their state-of-the-art facilities are equipped with advanced machinery and technology, ensuring that every product meets the highest standards of quality and precision. What sets Stenzel apart is their dedication to customer satisfaction and their ability to adapt to the ever-evolving demands of the market. The company prides itself on its skilled workforce, which is trained to utilize the latest techniques in CNC machining. This expertise allows Stenzel to offer not only standard products but also customized solutions that cater to unique project requirements. Their focus on continuous improvement and innovation ensures that they remain at the forefront of the industry. In addition to their machining capabilities, Stenzel GmbH emphasizes sustainability and efficiency in their operations. By implementing eco-friendly practices and optimizing production processes, they strive to minimize their environmental impact while maximizing productivity. This commitment to sustainability resonates with clients who are looking for responsible partners in their supply chain. Overall, Stenzel GmbH stands as a reliable partner for businesses seeking high-quality CNC machining services. Their blend of advanced technology, skilled craftsmanship, and customer-centric approach makes them an ideal choice for companies looking to enhance their manufacturing capabilities.
DMG DMG DMC 60 T RS 3 машина за обработка
DMG DMG DMC 60 T RS 3 obráběcí stroj
DMG DMG DMC 60 T RS 3 værktøjsmaskine
DMG DMG DMC 60 T RS 3 Werkzeugmaschine
DMG DMG DMC 60 T RS 3 εργαλειομηχανή
DMG DMG DMC 60 T RS 3 machine tool
DMG DMG DMC 60 T RS 3 máquina herramienta
DMG DMG DMC 60 T RS 3 machine-outil
DMG DMG DMC 60 T RS 3 alatni stroj
DMG DMG DMC 60 T RS 3 szerszámgép
DMG DMG DMC 60 T RS 3 macchina utensile
DMG DMG DMC 60 T RS 3 Įrankių mašina
DMG DMG DMC 60 T RS 3 gereedschapsmachine
DMG DMG DMC 60 T RS 3 maszyna narzędziowa
DMG DMG DMC 60 T RS 3 máquina-ferramenta
DMG DMG DMC 60 T RS 3 Mașină-unelte
DMG DMG DMC 60 T RS 3 станок
DMG DMG DMC 60 T RS 3 Машина алата
DMG DMG DMC 60 T RS 3 verktygsmaskin
DMG DMG DMC 60 T RS 3 takım tezgahı
EN
- Languages
English (GB)