| Manufacturer | DMG |
|---|---|
| Model | DMC 100 V hi-dyn |
| Year | 2000 |
| Location | Germany
|
DMG DMC 100 V hi-dyn vertical machining centre, manufactured in 2000. The machine has 3 axes, an X-axis travel of 1,000 mm, a maximum spindle speed of 18,000 rpm, an SK 40 taper and a 30-position tool changer. The current description lists a power capacity of up to 15 kW.
Recorded operating times are: Control On Time 23,425 h; Machine On Time 107,121 h; Program Run Time 32,257 h; and Spindle Working Hours 30,374 h. These are recorded hour figures and do not indicate the machine’s current operating condition.
The listed included items are a touch probe and various spare parts, including filters, wipers, belts and springs. Tool holders and cutting tools are also shown on a storage rack, including a holder with a probe; their inclusion in the sale is not specified. The machine is shown with a machine vise on the table, and another view shows two vises. A control console with display, keypad and emergency-stop button is present. A fluid tank with pump and connected hoses is also shown beside the machine.
Visible signs of use include chips on the worktable, wear and staining on interior surfaces, and dirt and scuffs around the inspection window. The tank exterior has scuffs and rust staining near its lower edge. The listing does not state that the machine has been tested or confirm its operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DMG DMC 100 V hi-dyn was manufactured in 2000. It features a high-speed spindle with a maximum speed of 18,000 rpm and a tool changer with 30 positions. The machine is equipped with a robust control unit from DMG and has a power capacity of up to 15 kW. If you are looking to get high-quality machining capabilities, consider the DMG DMC 100 V hi-dyn vertical machining centre we have for sale. Contact us for further details.- Control On Time (Steuerung ein): 23425 h
- Machine On Time (Maschine ein): 107121 h
- Program Run Time (Programmlauf): 32257 h
- Spindle Working Hours (Spindellaufzeit): 30374h
- Included: touch probe, various spare parts (filters, wipers, belts, springs)
Number of Axes: 3
Spindle Speed: 18000 RPM
Taper Size: SK 40
X-axis Travel: 1000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DMG DMC 100 V hi-dyn was manufactured in 2000. It features a high-speed spindle with a maximum speed of 18,000 rpm and a tool changer with 30 positions. The machine is equipped with a robust control unit from DMG and has a power capacity of up to 15 kW. If you are looking to get high-quality machining capabilities, consider the DMG DMC 100 V hi-dyn vertical machining centre we have for sale. Contact us for further details.- Control On Time (Steuerung ein): 23425 h
- Machine On Time (Maschine ein): 107121 h
- Program Run Time (Programmlauf): 32257 h
- Spindle Working Hours (Spindellaufzeit): 30374h
- Included: touch probe, various spare parts (filters, wipers, belts, springs)
Number of Axes: 3
Spindle Speed: 18000 RPM
Taper Size: SK 40
X-axis Travel: 1000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DMG DMC 100 V hi-dyn vertical machining centre, manufactured in 2000. The machine has 3 axes, an X-axis travel of 1,000 mm, a maximum spindle speed of 18,000 rpm, an SK 40 taper and a 30-position tool changer. The current description lists a power capacity of up to 15 kW.
Recorded operating times are: Control On Time 23,425 h; Machine On Time 107,121 h; Program Run Time 32,257 h; and Spindle Working Hours 30,374 h. These are recorded hour figures and do not indicate the machine’s current operating condition.
The listed included items are a touch probe and various spare parts, including filters, wipers, belts and springs. Tool holders and cutting tools are also shown on a storage rack, including a holder with a probe; their inclusion in the sale is not specified. The machine is shown with a machine vise on the table, and another view shows two vises. A control console with display, keypad and emergency-stop button is present. A fluid tank with pump and connected hoses is also shown beside the machine.
Visible signs of use include chips on the worktable, wear and staining on interior surfaces, and dirt and scuffs around the inspection window. The tank exterior has scuffs and rust staining near its lower edge. The listing does not state that the machine has been tested or confirm its operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DMG DMC 100 V hi-dyn
Vertikální obráběcí centrum DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Lodret bearbejdningscenter
DMG DMC 100 V hi-dyn Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Vertical machining center
Centro de mecanizado vertical DMG DMC 100 V hi-dyn
Centre d'usinage vertical DMG DMC 100 V hi-dyn
Vertikalni obradni centar DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Függőleges megmunkáló központ
Centro di lavoro verticale DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Vertikalus apdirbimo centras
DMG DMC 100 V hi-dyn Verticaal bewerkingscentrum
Pionowe centrum obróbcze DMG DMC 100 V hi-dyn
Centro de usinagem vertical DMG DMC 100 V hi-dyn
Centru de prelucrare vertical DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Вертикальный обрабатывающий центр
Vertikalni obradni centar DMG DMC 100 V hi-dyn
DMG DMC 100 V hi-dyn Vertikalt bearbetningscenter
Dikey işleme merkezi DMG DMC 100 V hi-dyn
EN
- Languages
English (GB)