Contact us to receive an offer.
| Manufacturer | DISKUS |
|---|---|
| Model | DDS 600 RAM |
| Year | 1972 |
| Location | Germany
|
This DISKUS DDS 600 RAM is a double disc surface grinding machine manufactured in 1972. It features grinding wheels with a diameter of 600 mm and an approximate bore and height of 75 mm and 150 mm respectively. The upper grinding wheel operates at speeds ranging from 95 to 955 rpm, while the lower wheel runs at 765 rpm. Each grinding spindle is powered by a 30 kW drive.
The machine is designed to handle workpieces with a grinding width or diameter between approximately 20 and 120 mm, and a maximum grinding height of 50 mm. It incorporates a hydraulic infeed impulse system with a range from 0.0025 to 0.05 mm and a total feed way of 150 mm. The workpiece carrier disk has an external diameter of 810 mm, and the rotary workpiece feed system offers infinitely variable feed rates from 25 to 241 mm/s.
Electrical specifications include a total electrical load of approximately 50 kW, operating at 380 V and 50 Hz. The machine weighs around 8,000 kg.
The grinding table is round with segmented slots and multiple clamps for secure workpiece holding. A central spindle or arbor is present for mounting the grinding wheels. The control panel, located on the right side, includes multiple buttons and dials, complemented by a monitor mounted on an articulated arm for operational control.
Hydraulic or pneumatic lines and fittings are visible around the grinding table area, along with multiple valves and pipes for coolant or lubrication distributed across the machine. The machine base houses electrical motors and wiring, while a separate control box or hydraulic unit is positioned next to the machine on a wooden pallet.
The machine appears clean and stable with no visible damage or rust. Surface paint shows minor wear consistent with use but no major defects. It is situated indoors on a concrete floor with minimal dust and minor stains, indicating a well-maintained environment. Overall, the DISKUS DDS 600 RAM presents as a robust and comprehensive surface grinding solution.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Double Disc Surface Grinding Machine
Manufacturer: DISKUS
Model: DDS 600 RAM
Year of Manufacture: 1972 (modernized in 2002)
Technical Condition: as-is, where-is
Grinding Wheels:
- Diameter: 600 mm
- Bore x Height: approx. 75 / 150 mm
Grinding Wheel Speeds:
- Upper Wheel: 95 – 955 rpm (3-30 m/s)
- Lower Wheel: 765 rpm (24 m/s)
Grinding Spindle Drive:
- Power: each 30 kW
Workpiece Dimensions:
- Grinding Width (or Workpiece Diameter): approx. 20 - 120 mm
- Maximum Grinding (Workpiece) Height: 50 mm
Hydraulic Infeed Impulse:
- Range: 0.0025 – 0.05 mm
- Total Feed Way: 150 mm
Workpiece Carrier Disk:
- External Diameter: 810 mm
Rotary Workpiece Feed System:
- Feeds: infinitely variable 25 – 241 mm/s
Electrical Specifications:
- Total Electrical Load: approx. 50 kW
- Voltage: 380 V
- Frequency: 50 Hz
Weight: approx. 8,000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 164 |
| Last activity | Nov. 7, 2026 |
Double Disc Surface Grinding Machine
Manufacturer: DISKUS
Model: DDS 600 RAM
Year of Manufacture: 1972 (modernized in 2002)
Technical Condition: as-is, where-is
Grinding Wheels:
- Diameter: 600 mm
- Bore x Height: approx. 75 / 150 mm
Grinding Wheel Speeds:
- Upper Wheel: 95 – 955 rpm (3-30 m/s)
- Lower Wheel: 765 rpm (24 m/s)
Grinding Spindle Drive:
- Power: each 30 kW
Workpiece Dimensions:
- Grinding Width (or Workpiece Diameter): approx. 20 - 120 mm
- Maximum Grinding (Workpiece) Height: 50 mm
Hydraulic Infeed Impulse:
- Range: 0.0025 – 0.05 mm
- Total Feed Way: 150 mm
Workpiece Carrier Disk:
- External Diameter: 810 mm
Rotary Workpiece Feed System:
- Feeds: infinitely variable 25 – 241 mm/s
Electrical Specifications:
- Total Electrical Load: approx. 50 kW
- Voltage: 380 V
- Frequency: 50 Hz
Weight: approx. 8,000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This DISKUS DDS 600 RAM is a double disc surface grinding machine manufactured in 1972. It features grinding wheels with a diameter of 600 mm and an approximate bore and height of 75 mm and 150 mm respectively. The upper grinding wheel operates at speeds ranging from 95 to 955 rpm, while the lower wheel runs at 765 rpm. Each grinding spindle is powered by a 30 kW drive.
The machine is designed to handle workpieces with a grinding width or diameter between approximately 20 and 120 mm, and a maximum grinding height of 50 mm. It incorporates a hydraulic infeed impulse system with a range from 0.0025 to 0.05 mm and a total feed way of 150 mm. The workpiece carrier disk has an external diameter of 810 mm, and the rotary workpiece feed system offers infinitely variable feed rates from 25 to 241 mm/s.
Electrical specifications include a total electrical load of approximately 50 kW, operating at 380 V and 50 Hz. The machine weighs around 8,000 kg.
The grinding table is round with segmented slots and multiple clamps for secure workpiece holding. A central spindle or arbor is present for mounting the grinding wheels. The control panel, located on the right side, includes multiple buttons and dials, complemented by a monitor mounted on an articulated arm for operational control.
Hydraulic or pneumatic lines and fittings are visible around the grinding table area, along with multiple valves and pipes for coolant or lubrication distributed across the machine. The machine base houses electrical motors and wiring, while a separate control box or hydraulic unit is positioned next to the machine on a wooden pallet.
The machine appears clean and stable with no visible damage or rust. Surface paint shows minor wear consistent with use but no major defects. It is situated indoors on a concrete floor with minimal dust and minor stains, indicating a well-maintained environment. Overall, the DISKUS DDS 600 RAM presents as a robust and comprehensive surface grinding solution.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 164 |
| Last activity | Nov. 7, 2026 |
Плоскошлифовъчна машина DISKUS DDS 600 RAM
Rovinná bruska DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Planslibemaskine
DISKUS DDS 600 RAM Flachschleifmaschine
Επιπεδοτική μηχανή λείανσης DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Surface grinding machine
Rectificadora tangencial DISKUS DDS 600 RAM
Rectifieuse plane DISKUS DDS 600 RAM
Ravna brusilica DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Sík köszörűgép
Rettificatrice tangenziale DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Plokštuminio šlifavimo staklės
DISKUS DDS 600 RAM Vlakslijpmachine
Szlifierka do płaszczyzn DISKUS DDS 600 RAM
Retificadora plana DISKUS DDS 600 RAM
Mașină de rectificat plană DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Плоскошлифовальный станок
Ravna brusilica DISKUS DDS 600 RAM
DISKUS DDS 600 RAM Planslipmaskin
Yüzey taşlama makinesi DISKUS DDS 600 RAM
EN
- Languages
English (GB)