Contact us to receive an offer.
| Manufacturer | Demag |
|---|---|
| Model | EL EXIS S 300 / 720 -1450 |
| Year | 2006 |
| Location | France
|
This Demag EL EXIS S 300 / 720 - 1450 is an all-electric injection moulding machine manufactured in 2006. It features a clamping force of 300 tonnes, with an opening stroke of 670 mm. The tie bar spacing measures 710 mm horizontally and 830 mm vertically, providing ample space for mold installation. The platen dimensions are 1380 mm in length and 1500 mm in width, suitable for various mold sizes.
The injection unit is equipped with a 60 mm diameter screw, delivering a shot volume of 763 cm³ under a maximum pressure of 1970 bar. This machine has a substantial footprint, measuring 6500 mm in length, 2000 mm in width, and 2300 mm in height, and weighs approximately 16 tonnes.
Control is managed via the Demag NC4 system, visible on the integrated control panel featuring a screen with multiple buttons and indicators for precise operation. The machine includes transparent protective covers on the front side, allowing visibility into internal components such as metal tubes and other mechanisms.
Additional visible components include large cylindrical motor or pump units with attached hoses and cables, as well as two sizable vertical cylindrical tanks or filters painted grey, accompanied by electrical and piping connections. The machine's exterior and control panel appear clean and well-maintained, with only minor dust on the transparent covers and slight wear on some components.
This equipment is suitable for industrial applications requiring reliable and precise injection molding capabilities, combining robust clamping force with advanced electronic controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine: DEMAG EL EXIS S 300 / 720 -1450
Year: 2006
Control type: NC4
Number of hours: 42,000
Closing
Closing force: 300 T
Opening stroke: 670 mm
Between columns: 710 x 830 mm
Mini/maxi mold: 330mm
Max distance between trays: 1380/1500 mm
Injection:
Screw diameter: 60 mm
cm3: 763
Bars: 1970
General:
Injection weight: 16 tonnes
Length dimensions: 6.50 m
Width dimensions: 2.0 m
Height dimensions: 2.30 m
Options:
Cores: 1
2 BLOWS, 2 batteries on injection
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the capacity of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 injection molding machine has a capacity of 300 tons.
What is the screw diameter of the machine?
This injection molding machine features a screw diameter of 60 mm.
What is the maximum distance between columns for this model?
This Demag EL EXIS S 300 / 720 -1450 has a maximum distance between columns of 710 x 830 mm.
What is the injection volume of this equipment?
This equipment has an injection volume of 763 cm³.
What is the injection pressure of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 operates at an injection pressure of 1970 bar.
What is the platen size of the machine?
This injection molding machine has a platen size of 1380 x 1500 mm.
What is the clamping stroke of this equipment?
This equipment has a clamping stroke of 675 mm.
What is the length of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 has a machine length of 6500 mm.
What is the width of the machine?
This injection molding machine has a width of 2000 mm.
What is the height of this equipment?
This equipment has a height of 2300 mm.
What is the weight of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 weighs 16000 kg.
How many hours has the machine operated?
This injection molding machine has operated for 42000 hours.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 53 |
| Last activity | Oct. 31, 2026 |
Machine: DEMAG EL EXIS S 300 / 720 -1450
Year: 2006
Control type: NC4
Number of hours: 42,000
Closing
Closing force: 300 T
Opening stroke: 670 mm
Between columns: 710 x 830 mm
Mini/maxi mold: 330mm
Max distance between trays: 1380/1500 mm
Injection:
Screw diameter: 60 mm
cm3: 763
Bars: 1970
General:
Injection weight: 16 tonnes
Length dimensions: 6.50 m
Width dimensions: 2.0 m
Height dimensions: 2.30 m
Options:
Cores: 1
2 BLOWS, 2 batteries on injection
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the capacity of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 injection molding machine has a capacity of 300 tons.
What is the screw diameter of the machine?
This injection molding machine features a screw diameter of 60 mm.
What is the maximum distance between columns for this model?
This Demag EL EXIS S 300 / 720 -1450 has a maximum distance between columns of 710 x 830 mm.
What is the injection volume of this equipment?
This equipment has an injection volume of 763 cm³.
What is the injection pressure of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 operates at an injection pressure of 1970 bar.
What is the platen size of the machine?
This injection molding machine has a platen size of 1380 x 1500 mm.
What is the clamping stroke of this equipment?
This equipment has a clamping stroke of 675 mm.
What is the length of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 has a machine length of 6500 mm.
What is the width of the machine?
This injection molding machine has a width of 2000 mm.
What is the height of this equipment?
This equipment has a height of 2300 mm.
What is the weight of this Demag EL EXIS S 300 / 720 -1450?
This Demag EL EXIS S 300 / 720 -1450 weighs 16000 kg.
How many hours has the machine operated?
This injection molding machine has operated for 42000 hours.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Demag EL EXIS S 300 / 720 - 1450 is an all-electric injection moulding machine manufactured in 2006. It features a clamping force of 300 tonnes, with an opening stroke of 670 mm. The tie bar spacing measures 710 mm horizontally and 830 mm vertically, providing ample space for mold installation. The platen dimensions are 1380 mm in length and 1500 mm in width, suitable for various mold sizes.
The injection unit is equipped with a 60 mm diameter screw, delivering a shot volume of 763 cm³ under a maximum pressure of 1970 bar. This machine has a substantial footprint, measuring 6500 mm in length, 2000 mm in width, and 2300 mm in height, and weighs approximately 16 tonnes.
Control is managed via the Demag NC4 system, visible on the integrated control panel featuring a screen with multiple buttons and indicators for precise operation. The machine includes transparent protective covers on the front side, allowing visibility into internal components such as metal tubes and other mechanisms.
Additional visible components include large cylindrical motor or pump units with attached hoses and cables, as well as two sizable vertical cylindrical tanks or filters painted grey, accompanied by electrical and piping connections. The machine's exterior and control panel appear clean and well-maintained, with only minor dust on the transparent covers and slight wear on some components.
This equipment is suitable for industrial applications requiring reliable and precise injection molding capabilities, combining robust clamping force with advanced electronic controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 53 |
| Last activity | Oct. 31, 2026 |
Demag EL EXIS S 300 / 720 -1450
Elektrický vstřikovací lis Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450 Eine elektrische Spritzgießmaschine
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450 Electric injection moulding machine
Inyectora de plástico eléctrica Demag EL EXIS S 300 / 720 -1450
Presse à injecter électrique Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Pressa ad iniezione elettrica Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Wtryskarka elektryczna Demag EL EXIS S 300 / 720 -1450
Máquina injetora elétrica Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450 Электрический станок для литья под давлением
Demag EL EXIS S 300 / 720 -1450
Demag EL EXIS S 300 / 720 -1450
Bütün elektrikli enjeksiyon kalıplama makinesi Demag EL EXIS S 300 / 720 -1450
EN
- Languages
English (GB)