Contact us to receive an offer.
| Manufacturer | Demag |
|---|---|
| Model | 330T ERGOTECH SYSTEM 3300-1450 |
| Year | 1998 |
| Location | France
|
This Demag 330T Ergotech System 3300-1450 injection molding machine, manufactured in 1998, offers robust performance for industrial plastic molding applications. The machine features a clamping force of 330 tons (3300 kN), suitable for medium to large mold sizes. The platen measures 1040 mm in length and 950 mm in width, with a tie bar spacing of 710 mm horizontally and 630 mm vertically, accommodating molds with a thickness ranging from 330 mm to 710 mm. The maximum distance between the tray is 1385 mm, providing ample space for various mold configurations.
The injection unit is equipped with a 60 mm diameter screw, delivering a calculated injection volume of 763 cm³ and a pressure on the material of 1905 bar. It has a length-to-diameter ratio of 20 L/D and a PS plasticization capacity of 690 kg/h, ensuring efficient material processing. The machine includes three heating zones to maintain precise temperature control during operation.
Power requirements include a heat output of 55 kW and a total installed power of 78 kW, supported by an oil quantity of 700 liters for hydraulic functions. The equipment is fitted with an NC4 control system, featuring a control panel with a display screen, keypad, and multiple function buttons for operational management.
Additional features include an electric motor on the metering unit, integrated hot ducts, and hydraulic cores compliant with EUROMAP 3 standards: three hydraulic cores, three sequential cores, and one air core. The machine's general dimensions are 6500 mm in length, 2300 mm in width, and 2000 mm in height, with a weight of 14,300 kg.
Visually, the machine is in clean condition with no visible damage. It has a protective transparent cover on the central section and a well-maintained control panel. The rear hydraulic and electrical components, including multiple hoses, cables, valves, and tubes, appear intact and clean without signs of leaks or damage. The mold area shows clean metal tie bars and platen surfaces free from rust or damage, indicating good maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
INJECTION UNIT
Screw diameter: 60 mm
Calculated injection volume: 763 cm³
Length / diameter ratio: 20 L / D
Pressure on the material: 1905 bars
PS plasticization capacity: 690 Kg / h
CLOSING UNIT
Closing force: 3300 kN
Mold thickness Mini / Max: 330/710 mm
Max distance between tray: 1385 mm
Passage between columns: 710 x 630 mm
Tray size: 1040 x 950 mm
GENERAL
Heat output: 55 kW
Total installed power: 78 kW
Quantity of oil: 700 l.
EQUIPMENT
- NC4 control
- Electric motor on metering
- Integrated hot ducts
- EUROMAP - 3 Hydraulic cores
- 3 Sequential cores
- 1 Air core
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this DEMAG 330T ERGOTECH SYSTEM 3300-1450 manufactured?
This DEMAG 330T ERGOTECH SYSTEM 3300-1450 injection moulding machine was manufactured in 1998.
What type of motor does this DEMAG 330T ERGOTECH SYSTEM 3300-1450 have?
This DEMAG 330T ERGOTECH SYSTEM 3300-1450 injection moulding machine is equipped with an electric motor on the dosing unit.
What is the condition of the machine?
The machine is in good condition.
Is this equipment available for inspection?
This equipment is available for inspection in France, near Geneva.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Nov. 2, 2026 |
INJECTION UNIT
Screw diameter: 60 mm
Calculated injection volume: 763 cm³
Length / diameter ratio: 20 L / D
Pressure on the material: 1905 bars
PS plasticization capacity: 690 Kg / h
CLOSING UNIT
Closing force: 3300 kN
Mold thickness Mini / Max: 330/710 mm
Max distance between tray: 1385 mm
Passage between columns: 710 x 630 mm
Tray size: 1040 x 950 mm
GENERAL
Heat output: 55 kW
Total installed power: 78 kW
Quantity of oil: 700 l.
EQUIPMENT
- NC4 control
- Electric motor on metering
- Integrated hot ducts
- EUROMAP - 3 Hydraulic cores
- 3 Sequential cores
- 1 Air core
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this DEMAG 330T ERGOTECH SYSTEM 3300-1450 manufactured?
This DEMAG 330T ERGOTECH SYSTEM 3300-1450 injection moulding machine was manufactured in 1998.
What type of motor does this DEMAG 330T ERGOTECH SYSTEM 3300-1450 have?
This DEMAG 330T ERGOTECH SYSTEM 3300-1450 injection moulding machine is equipped with an electric motor on the dosing unit.
What is the condition of the machine?
The machine is in good condition.
Is this equipment available for inspection?
This equipment is available for inspection in France, near Geneva.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Demag 330T Ergotech System 3300-1450 injection molding machine, manufactured in 1998, offers robust performance for industrial plastic molding applications. The machine features a clamping force of 330 tons (3300 kN), suitable for medium to large mold sizes. The platen measures 1040 mm in length and 950 mm in width, with a tie bar spacing of 710 mm horizontally and 630 mm vertically, accommodating molds with a thickness ranging from 330 mm to 710 mm. The maximum distance between the tray is 1385 mm, providing ample space for various mold configurations.
The injection unit is equipped with a 60 mm diameter screw, delivering a calculated injection volume of 763 cm³ and a pressure on the material of 1905 bar. It has a length-to-diameter ratio of 20 L/D and a PS plasticization capacity of 690 kg/h, ensuring efficient material processing. The machine includes three heating zones to maintain precise temperature control during operation.
Power requirements include a heat output of 55 kW and a total installed power of 78 kW, supported by an oil quantity of 700 liters for hydraulic functions. The equipment is fitted with an NC4 control system, featuring a control panel with a display screen, keypad, and multiple function buttons for operational management.
Additional features include an electric motor on the metering unit, integrated hot ducts, and hydraulic cores compliant with EUROMAP 3 standards: three hydraulic cores, three sequential cores, and one air core. The machine's general dimensions are 6500 mm in length, 2300 mm in width, and 2000 mm in height, with a weight of 14,300 kg.
Visually, the machine is in clean condition with no visible damage. It has a protective transparent cover on the central section and a well-maintained control panel. The rear hydraulic and electrical components, including multiple hoses, cables, valves, and tubes, appear intact and clean without signs of leaks or damage. The mold area shows clean metal tie bars and platen surfaces free from rust or damage, indicating good maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Nov. 2, 2026 |
Машина за леене под налягане Demag 330T ERGOTECH SYSTEM 3300-1450
Vstřikolis Demag 330T ERGOTECH SYSTEM 3300-1450
Sprøjtestøbemaskine Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Injection moulding machine
Inyectora de plástico Demag 330T ERGOTECH SYSTEM 3300-1450
Presse à injecter Demag 330T ERGOTECH SYSTEM 3300-1450
Stroj za injekcijsko prešanje Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Fröccsöntő gép
Pressa ad iniezione Demag 330T ERGOTECH SYSTEM 3300-1450
Įpurškimo formavimo mašina Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Spuitgietmachine
Wtryskarka Demag 330T ERGOTECH SYSTEM 3300-1450
Máquina de moldagem por injeção Demag 330T ERGOTECH SYSTEM 3300-1450
Mașină de turnat prin injecție Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Термопластавтомат
Mašina za brizganje Demag 330T ERGOTECH SYSTEM 3300-1450
Demag 330T ERGOTECH SYSTEM 3300-1450 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Demag 330T ERGOTECH SYSTEM 3300-1450
EN
- Languages
English (GB)