Contact us to receive an offer.
| Manufacturer | Deckel Maho |
|---|---|
| Model | DMU60P |
| Year | 1999 |
| Location | Poland
|
This listing features a Deckel Maho DMU60P vertical machining center manufactured in 1999. It is a 3-axis milling machine with axis travels of 1003 mm in X, 603 mm in Y, and 603 mm in Z, suitable for a variety of machining tasks. The machine is equipped with an electro-spindle capable of speeds ranging from 20 to 8000 rpm, providing flexibility for different machining requirements. The spindle uses an SK-40 tool holding fixture.
The machine includes a chip conveyor system with an attached green chip bin to facilitate efficient chip removal during operation. Tool storage is provided via a carousel capable of holding 24 tools, which are organized and installed as seen. The machining area features a rotary table with T-slots for secure workholding.
Operator interaction is managed through a Siemens 810D control system, featuring a control console with a CRT screen, keyboard, rotary switches, and multiple buttons. The control panel shows signs of wear consistent with use. The machine enclosure is teal and gray with large dual front doors and windows allowing visibility into the machining area.
The machine shows typical surface wear and signs of use both externally and within the machining area, including some metal chips and residue. Hour meters are present but their readings are partially unclear. Documentation is available in German. Delivery is from the warehouse of RAS Poland with availability starting from February 2019.
This Deckel Maho DMU60P is suitable for users seeking a well-equipped vertical machining center with comprehensive tooling and chip management features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
3-axis milling center
Control: Siemens 810D
- year of production 1999
- 1 owner
- documentation in german
- travel in axes x -1003 mm, y -603 mm, z - 603 mm
- electro-spindle speed: 2o-8ooo rpm
- no cooling by the spindle
- chip conveyor
- tool storage - 24 pieces
- manual control panel - handwheel
- machine connected, fully operational, we make for current orders for our customers
- good technical condition of the machine tool
- type of tool holding fixture SK-40
- delivery terms: from the warehouse of RAS Poland
- availability: from 02/2019
- possibility of future cooperation, cooperation, orders
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Oct. 16, 2024 |
3-axis milling center
Control: Siemens 810D
- year of production 1999
- 1 owner
- documentation in german
- travel in axes x -1003 mm, y -603 mm, z - 603 mm
- electro-spindle speed: 2o-8ooo rpm
- no cooling by the spindle
- chip conveyor
- tool storage - 24 pieces
- manual control panel - handwheel
- machine connected, fully operational, we make for current orders for our customers
- good technical condition of the machine tool
- type of tool holding fixture SK-40
- delivery terms: from the warehouse of RAS Poland
- availability: from 02/2019
- possibility of future cooperation, cooperation, orders
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Deckel Maho DMU60P vertical machining center manufactured in 1999. It is a 3-axis milling machine with axis travels of 1003 mm in X, 603 mm in Y, and 603 mm in Z, suitable for a variety of machining tasks. The machine is equipped with an electro-spindle capable of speeds ranging from 20 to 8000 rpm, providing flexibility for different machining requirements. The spindle uses an SK-40 tool holding fixture.
The machine includes a chip conveyor system with an attached green chip bin to facilitate efficient chip removal during operation. Tool storage is provided via a carousel capable of holding 24 tools, which are organized and installed as seen. The machining area features a rotary table with T-slots for secure workholding.
Operator interaction is managed through a Siemens 810D control system, featuring a control console with a CRT screen, keyboard, rotary switches, and multiple buttons. The control panel shows signs of wear consistent with use. The machine enclosure is teal and gray with large dual front doors and windows allowing visibility into the machining area.
The machine shows typical surface wear and signs of use both externally and within the machining area, including some metal chips and residue. Hour meters are present but their readings are partially unclear. Documentation is available in German. Delivery is from the warehouse of RAS Poland with availability starting from February 2019.
This Deckel Maho DMU60P is suitable for users seeking a well-equipped vertical machining center with comprehensive tooling and chip management features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Oct. 16, 2024 |
Обработващ център - вертикален Deckel Maho DMU60P
Obráběcí centrum - vertikální Deckel Maho DMU60P
Deckel Maho DMU60P Bearbejdningscenter - lodret
Deckel Maho DMU60P Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Deckel Maho DMU60P
Deckel Maho DMU60P Machining center - vertical
Centro de mecanizado vertical Deckel Maho DMU60P
Centre d'usinage vertical Deckel Maho DMU60P
Obradni centar - vertikalni Deckel Maho DMU60P
Deckel Maho DMU60P Megmunkáló központ - függőleges
Centro di lavoro verticale Deckel Maho DMU60P
Apdirbimo centras – vertikalus Deckel Maho DMU60P
Deckel Maho DMU60P Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Deckel Maho DMU60P
Centro de usinagem - vertical Deckel Maho DMU60P
Centru de prelucrare - vertical Deckel Maho DMU60P
Deckel Maho DMU60P Вертикальный обрабатывающий центр
Obradni centar - vertikalni Deckel Maho DMU60P
Deckel Maho DMU60P Bearbetningscentrum - vertikalt
Dikey işleme merkezi Deckel Maho DMU60P
EN
- Languages
English (GB)