| Manufacturer | Deckel Maho |
|---|---|
| Model | DMC 80 |
| Year | 2009 |
| Location | Germany
|
For sale is a used Deckel Maho DMC 80 5-axis machining center, manufactured in 2009. This machine features a Siemens 840D-Powerline CNC controller, known for its precision and reliability in complex machining tasks. The machine offers travel of 800 mm along the X, Y, and Z axes, complemented by a C-axis with 360° rotation and a B-axis adjustable from 0 to 190°, enabling versatile 5-axis machining capabilities.
The machining center is equipped with a rotary table inside the machining area, supporting two pallets with table dimensions of 800 mm diameter by 630 mm width. It can accommodate workpieces up to 1000 kg, with the table rotating at speeds up to 800 rpm and delivering a maximum torque of 980 Nm.
The spindle is powered by a 44 kW motor, capable of reaching speeds up to 10,000 rpm, with spindle torque rated at 288 Nm (40% duty cycle) and 187 Nm continuous. The tool system includes an HSK-A 100 tool holder with a magazine capacity of 180 tool pockets, allowing efficient tool changes with a chip-to-chip time of 4.5 seconds.
Additional equipment includes an electronic handwheel, chip conveyor, infrared probe, rinsing gun, and a paper band filter. The machine interface supports the FASTEMS system, and features a signal lamp and 3D QuickSET for enhanced operation. Cooling is facilitated through the spindle center bar, with a tank capacity of 980 liters.
The machine measures 4956 mm in length, 5064 mm in width, and 2900 mm in height, weighing approximately 14,000 kg. Visual inspection shows the machine to be clean and well-maintained, with no visible damage. The control panel is mounted on a stand adjacent to the machine and includes various control buttons, an emergency stop button, knobs, and a key switch, with a DMG SIEMENS interface visible on the screen. The control panel shows signs of use but no damage. The floor area around the machine shows typical wear consistent with industrial use.
Running times are recorded as 47,443 hours under power and 22,963 hours spindle working time. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: Used Deckel Maho DMC 80 5-axis Machining Center
Manufacturer: Deckel Maho
Model: DMC 80
Year of Manufacture: 2009
Technical Condition: As-is, where-is
CNC Controller: Siemens 840D-Powerline
Axes:
X-axis Travel: 800 mm
Y-axis Travel: 800 mm
Z-axis Travel: 800 mm
C-axis: 360º (0.001)
B-axis: 0-190º
Feed Rates:
Feed Rates: 60 m/min
Rapid Traverse: 60 m/min
Milling/Turning Table:
Number of Pallets: 2
Table Dimensions: Ø800 × 630 mm
Max. Workpiece Weight: 1000 kg
Table Rotation Speed: 800 rpm
Max. Torque: 980 Nm
Spindle:
Spindle Speed: 10000 rpm
Spindle Drive Power: 44/32 kW (40% ED/cont)
Spindle Torque: 288/187 Nm
Cooling:
Cooling Through the Spindle Center Bar: 40
Tank Capacity: 980
Tool System:
Tool Holder: HSK-A 100
Tool Magazine Slots: 180
Chip-to-Chip Time: 4.5 s
Equipment:
Electronic Handwheel
Chip Conveyor
Infrared Probe
Rinsing Gun
Operating Mode: 4 Blowing Air Through Spindle Center Selectable via M-function
Signal Lamp
3D QuickSET
Machine Interface for FASTEMS System
Paper Band Filter
Machine Running Times:
Under Power: 47443 hours
Spindle Working: 22963 hours
Basic Machine Dimensions / Weight:
Length: 4956 mm
Width: 5064 mm
Height: 2900 mm
Weight: 14000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Deckel Maho DMC 80 5-axis machining center used?
This Deckel Maho DMC 80 5-axis machining center is used.
Is this Deckel Maho DMC 80 5-axis machining center under power?
This Deckel Maho DMC 80 5-axis machining center is under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 52 |
| Last activity | Nov. 2, 2026 |
Offer Title: Used Deckel Maho DMC 80 5-axis Machining Center
Manufacturer: Deckel Maho
Model: DMC 80
Year of Manufacture: 2009
Technical Condition: As-is, where-is
CNC Controller: Siemens 840D-Powerline
Axes:
X-axis Travel: 800 mm
Y-axis Travel: 800 mm
Z-axis Travel: 800 mm
C-axis: 360º (0.001)
B-axis: 0-190º
Feed Rates:
Feed Rates: 60 m/min
Rapid Traverse: 60 m/min
Milling/Turning Table:
Number of Pallets: 2
Table Dimensions: Ø800 × 630 mm
Max. Workpiece Weight: 1000 kg
Table Rotation Speed: 800 rpm
Max. Torque: 980 Nm
Spindle:
Spindle Speed: 10000 rpm
Spindle Drive Power: 44/32 kW (40% ED/cont)
Spindle Torque: 288/187 Nm
Cooling:
Cooling Through the Spindle Center Bar: 40
Tank Capacity: 980
Tool System:
Tool Holder: HSK-A 100
Tool Magazine Slots: 180
Chip-to-Chip Time: 4.5 s
Equipment:
Electronic Handwheel
Chip Conveyor
Infrared Probe
Rinsing Gun
Operating Mode: 4 Blowing Air Through Spindle Center Selectable via M-function
Signal Lamp
3D QuickSET
Machine Interface for FASTEMS System
Paper Band Filter
Machine Running Times:
Under Power: 47443 hours
Spindle Working: 22963 hours
Basic Machine Dimensions / Weight:
Length: 4956 mm
Width: 5064 mm
Height: 2900 mm
Weight: 14000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Deckel Maho DMC 80 5-axis machining center used?
This Deckel Maho DMC 80 5-axis machining center is used.
Is this Deckel Maho DMC 80 5-axis machining center under power?
This Deckel Maho DMC 80 5-axis machining center is under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
For sale is a used Deckel Maho DMC 80 5-axis machining center, manufactured in 2009. This machine features a Siemens 840D-Powerline CNC controller, known for its precision and reliability in complex machining tasks. The machine offers travel of 800 mm along the X, Y, and Z axes, complemented by a C-axis with 360° rotation and a B-axis adjustable from 0 to 190°, enabling versatile 5-axis machining capabilities.
The machining center is equipped with a rotary table inside the machining area, supporting two pallets with table dimensions of 800 mm diameter by 630 mm width. It can accommodate workpieces up to 1000 kg, with the table rotating at speeds up to 800 rpm and delivering a maximum torque of 980 Nm.
The spindle is powered by a 44 kW motor, capable of reaching speeds up to 10,000 rpm, with spindle torque rated at 288 Nm (40% duty cycle) and 187 Nm continuous. The tool system includes an HSK-A 100 tool holder with a magazine capacity of 180 tool pockets, allowing efficient tool changes with a chip-to-chip time of 4.5 seconds.
Additional equipment includes an electronic handwheel, chip conveyor, infrared probe, rinsing gun, and a paper band filter. The machine interface supports the FASTEMS system, and features a signal lamp and 3D QuickSET for enhanced operation. Cooling is facilitated through the spindle center bar, with a tank capacity of 980 liters.
The machine measures 4956 mm in length, 5064 mm in width, and 2900 mm in height, weighing approximately 14,000 kg. Visual inspection shows the machine to be clean and well-maintained, with no visible damage. The control panel is mounted on a stand adjacent to the machine and includes various control buttons, an emergency stop button, knobs, and a key switch, with a DMG SIEMENS interface visible on the screen. The control panel shows signs of use but no damage. The floor area around the machine shows typical wear consistent with industrial use.
Running times are recorded as 47,443 hours under power and 22,963 hours spindle working time. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 52 |
| Last activity | Nov. 2, 2026 |
Използван 5-осев обработващ център Deckel Maho DMC 80
Použité 5osé obráběcí centrum Deckel Maho DMC 80
Brugt Deckel Maho DMC 80 5-akset bearbejdningscenter
Gebrauchte 5-Achs-Bearbeitungszentrum Deckel Maho DMC 80
Μεταχειρισμένο κέντρο κατεργασίας 5 αξόνων Deckel Maho DMC 80
Used Deckel Maho DMC 80 5-axis machining center
Centro de mecanizado de 5 ejes Deckel Maho DMC 80 usado
Centre d'usinage 5 axes Deckel Maho DMC 80 d'occasion
Polovni Deckel Maho DMC 80, 5-osni centar za obradu
Használt Deckel Maho DMC 80 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi Deckel Maho DMC 80 usato
Naudotas Deckel Maho DMC 80 5 ašių apdirbimo centras
Gebruikt Deckel Maho DMC 80 5-assig bewerkingscentrum
Używane 5-osiowe centrum obróbcze Deckel Maho DMC 80
Centro de usinagem Deckel Maho DMC 80 de 5 eixos usado
Centru de prelucrare cu 5 axe Deckel Maho DMC 80 second hand
Б/у 5-осевой обрабатывающий центр Deckel Maho DMC 80
Korišćeni Dekel Maho DMC 80 5-osni centar za obradu
Begagnat Deckel Maho DMC 80 5-axligt bearbetningscenter
Kullanılmış Deckel Maho DMC 80 5 eksenli işleme merkezi
EN
- Languages
English (GB)