| Manufacturer | DECKEL MAHO |
|---|---|
| Model | DMC 65 V |
| Year | 2003 |
| Location | Germany
|
Overview
This listing describes a DECKEL MAHO DMC 65 V vertical machining centre (3-axis) manufactured in 2003. The machine is equipped with a HEIDENHAIN TNC 426 control and is intended for milling applications. Key features include a high-speed spindle and a 30-station tool changer to support a range of production needs.
Main specifications
- Manufacturer / Model: DECKEL MAHO DMC 65 V
- Year of manufacture: 2003
- Control: HEIDENHAIN TNC 426
- Number of axes: 3
- Travels: X = 650 mm, Y = 500 mm, Z = 500 mm
- Spindle speed: 18,000 RPM
- Tool changer: 30 tool stations
Operating hours and electrical
- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h
- Production hours (as listed): 14,085
- Electrical connection (auxiliary): 230 V / 1 A
Optional equipment and accessories (as listed)
- Tool measurement
- Automatic 3D probe
- Chip conveyor
- External cooling system
Known issues (as listed)
- Sensor for control cabinet ventilation does not always turn on.
- Spindle collet may seize after approximately three weeks of inactivity; it typically loosens after about 200 clamping/releasing cycles and operates without issue during continuous use.
Notes
This description only reports the specifications, optional equipment, operating hours and known issues provided in the source information. No additional testing, refurbishment status or warranty claims are stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.
Overview
brand: DECKEL MAHO
year: 2003
MODEL: DMC 65 V
production hours: 14085
application type: Milling
Location: Germany
machine type: Vertical Machining Centre
control unit brand: HEIDENHAIN
Technical Information - DECKEL MAHO DMC 65 V
Control Unit
Control Brand: HEIDENHAIN
Control Model: TNC 426
Movement
Number of Axes: 3
X-axis Travel: 650 mm
Y-axis Travel: 500 mm
Z-axis Travel: 500 mm
Technical Specification
Spindle Speed: 18000 RPM
Tool Stations: 30
Additional Information
- Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system
- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h
- Electrical Connection: 230V / 1A (Auxiliary)
- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2111 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.
Overview
brand: DECKEL MAHO
year: 2003
MODEL: DMC 65 V
production hours: 14085
application type: Milling
Location: Germany
machine type: Vertical Machining Centre
control unit brand: HEIDENHAIN
Technical Information - DECKEL MAHO DMC 65 V
Control Unit
Control Brand: HEIDENHAIN
Control Model: TNC 426
Movement
Number of Axes: 3
X-axis Travel: 650 mm
Y-axis Travel: 500 mm
Z-axis Travel: 500 mm
Technical Specification
Spindle Speed: 18000 RPM
Tool Stations: 30
Additional Information
- Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system
- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h
- Electrical Connection: 230V / 1A (Auxiliary)
- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This listing describes a DECKEL MAHO DMC 65 V vertical machining centre (3-axis) manufactured in 2003. The machine is equipped with a HEIDENHAIN TNC 426 control and is intended for milling applications. Key features include a high-speed spindle and a 30-station tool changer to support a range of production needs.
Main specifications
- Manufacturer / Model: DECKEL MAHO DMC 65 V
- Year of manufacture: 2003
- Control: HEIDENHAIN TNC 426
- Number of axes: 3
- Travels: X = 650 mm, Y = 500 mm, Z = 500 mm
- Spindle speed: 18,000 RPM
- Tool changer: 30 tool stations
Operating hours and electrical
- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h
- Production hours (as listed): 14,085
- Electrical connection (auxiliary): 230 V / 1 A
Optional equipment and accessories (as listed)
- Tool measurement
- Automatic 3D probe
- Chip conveyor
- External cooling system
Known issues (as listed)
- Sensor for control cabinet ventilation does not always turn on.
- Spindle collet may seize after approximately three weeks of inactivity; it typically loosens after about 200 clamping/releasing cycles and operates without issue during continuous use.
Notes
This description only reports the specifications, optional equipment, operating hours and known issues provided in the source information. No additional testing, refurbishment status or warranty claims are stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2111 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DECKEL MAHO DMC 65 V
Vertikální obráběcí centrum DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Lodret bearbejdningscenter
DECKEL MAHO DMC 65 V Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Vertical machining center
Centro de mecanizado vertical DECKEL MAHO DMC 65 V
Centre d'usinage vertical DECKEL MAHO DMC 65 V
Vertikalni obradni centar DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Függőleges megmunkáló központ
Centro di lavoro verticale DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Vertikalus apdirbimo centras
DECKEL MAHO DMC 65 V Verticaal bewerkingscentrum
Pionowe centrum obróbcze DECKEL MAHO DMC 65 V
Centro de usinagem vertical DECKEL MAHO DMC 65 V
Centru de prelucrare vertical DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Вертикальный обрабатывающий центр
Vertikalni obradni centar DECKEL MAHO DMC 65 V
DECKEL MAHO DMC 65 V Vertikalt bearbetningscenter
Dikey işleme merkezi DECKEL MAHO DMC 65 V
EN
- Languages
English (GB)