| Manufacturer | De Lema |
|---|---|
| Model | DLST/L |
| Year | 2018 |
| Location | USA
|
De Lema DLST/L dry heat steriliser / depyrogenation unit paired with a Hosokawa Micron dispensing isolator. Manufacturer: De Lema. Model: DLST/L. Year manufactured: 2018. The De Lema dry heat steriliser is specified at 250 °C for the depyrogenation of dry aluminium canisters, with an approximate depyrogenation cycle time of 7 hours. Tray capacity is listed as between 15 and 35 canisters per tray depending on canister size. The Hosokawa Micron isolator section is described for powder filling of canisters, including closure and bagging operations; dispensing time is given as approximately 1.33 kg/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan for the filling/closing/bagging sequence is stated as between 22.9 and 29 minutes depending on product and canister size. The system was installed and commissioned but has never been operated on any products, per the provided information. Supported canister sizes the system was designed to handle: 2.5 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 144 mm); 6.25 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 309 mm); 12.5 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 383 mm); 32 L (neck Ø 116 mm, body Ø 300 mm, height w/o closure 539 mm). Included components and notable accessories/condition: a stainless steel pass-through oven/autoclave with sliding vertical doors; a left-side control cluster with four circular gauges above a touchscreen/control display; an interior stainless chamber with multiple horizontal slot rails and internal racks for trays; an orange/red door gasket on the chamber opening; a stainless isolator/glovebox with multiple glove ports, two side-by-side access chambers and an isolator-mounted control panel; several stainless steel racks and trolleys on casters and mobile stainless worktables; a stainless worktable with three cylindrical canisters and an orange handheld tool; a black power supply/electronic unit with cabling. Exterior and interior are described as generally clean, with no obvious dents or major external damage and only minor surface marks on the chamber rear wall. Buyers should verify operational status and all specifications prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. The system was designed to handle the following size canisters: 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm; 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm; 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm; 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm. System installed and commissioned but has never been operated on any products.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 192 |
| Last activity | Nov. 8, 2026 |
Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. The system was designed to handle the following size canisters: 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm; 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm; 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm; 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm. System installed and commissioned but has never been operated on any products.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
De Lema DLST/L dry heat steriliser / depyrogenation unit paired with a Hosokawa Micron dispensing isolator. Manufacturer: De Lema. Model: DLST/L. Year manufactured: 2018. The De Lema dry heat steriliser is specified at 250 °C for the depyrogenation of dry aluminium canisters, with an approximate depyrogenation cycle time of 7 hours. Tray capacity is listed as between 15 and 35 canisters per tray depending on canister size. The Hosokawa Micron isolator section is described for powder filling of canisters, including closure and bagging operations; dispensing time is given as approximately 1.33 kg/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan for the filling/closing/bagging sequence is stated as between 22.9 and 29 minutes depending on product and canister size. The system was installed and commissioned but has never been operated on any products, per the provided information. Supported canister sizes the system was designed to handle: 2.5 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 144 mm); 6.25 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 309 mm); 12.5 L (neck Ø 116 mm, body Ø 175 mm, height w/o closure 383 mm); 32 L (neck Ø 116 mm, body Ø 300 mm, height w/o closure 539 mm). Included components and notable accessories/condition: a stainless steel pass-through oven/autoclave with sliding vertical doors; a left-side control cluster with four circular gauges above a touchscreen/control display; an interior stainless chamber with multiple horizontal slot rails and internal racks for trays; an orange/red door gasket on the chamber opening; a stainless isolator/glovebox with multiple glove ports, two side-by-side access chambers and an isolator-mounted control panel; several stainless steel racks and trolleys on casters and mobile stainless worktables; a stainless worktable with three cylindrical canisters and an orange handheld tool; a black power supply/electronic unit with cabling. Exterior and interior are described as generally clean, with no obvious dents or major external damage and only minor surface marks on the chamber rear wall. Buyers should verify operational status and all specifications prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 192 |
| Last activity | Nov. 8, 2026 |
Промишлен автоклав De Lema DLST/L
Průmyslový autokláv De Lema DLST/L
De Lema DLST/L Industriel autoklave
De Lema DLST/L Industrieautoklav
Βιομηχανικό αυτόκλειστο De Lema DLST/L
De Lema DLST/L Industrial autoclave
Autoclave industrial De Lema DLST/L
Autoclave industriel De Lema DLST/L
Industrijski autoklav De Lema DLST/L
De Lema DLST/L Ipari autokláv
Autoclave industriale De Lema DLST/L
De Lema DLST/L Pramoninis autoklavas
De Lema DLST/L Industriële autoclaaf
Autoklaw przemysłowy De Lema DLST/L
Autoclave industrial De Lema DLST/L
Autoclavă industrială De Lema DLST/L
De Lema DLST/L Промышленный автоклав
Industrijski autoklav De Lema DLST/L
De Lema DLST/L Industriell autoklav
Endüstriyel otoklav De Lema DLST/L
EN
- Languages
English (GB)