Contact us to receive an offer.
| Manufacturer | Darley |
|---|---|
| Model | EHP 230 43 37 |
| Year | 2008 |
| Location | Netherlands
|
Darley EHP 230 43 37 CNC press brake, manufactured in 2008. The machine has a listed pressing strength of 230 tonnes and a folding length of 4,300 mm. It is equipped with a Delem DA-69T CNC control system and six controlled axes: Y1, Y2, X, R, Z1 and Z2. The control console is mounted on the left side of the machine. The display is dark in the available view, so no control interface is shown.
The press brake has hydraulic Wila New Standard top clamping and pneumatic Wila 13 mm bottom clamping. Long upper and lower tooling is fitted along the bed. A LazerSafe-marked sensor unit is mounted beside the tooling area. A rear linear rail assembly with two adjustable carriage or support units is also present.
The machine has blue side covers, with the left cover marked EHP 230. Its exterior surfaces, including the front housing, lower bed and tooling, show visible scuffs, scratches and paint wear. Protective mesh fencing is visible alongside the machine. A red emergency-stop button is positioned beside the control display, with a rotary control, key switch and pushbutton below it.
This Darley press brake combines a 230-tonne listed strength with a 4,300 mm folding length, CNC control and Wila clamping equipment. The visible surface wear should be taken into account when assessing its cosmetic condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity: 4,300 x 230 metric tons
New Delem DA69T control system
Y1, Y2, X, R, Z1, and Z2 CNC-controlled
Hydraulic Wila New Standard top clamping
Pneumatic Wila 13 mm bottom clamping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 199 |
| Last activity | Oct. 22, 2026 |
Capacity: 4,300 x 230 metric tons
New Delem DA69T control system
Y1, Y2, X, R, Z1, and Z2 CNC-controlled
Hydraulic Wila New Standard top clamping
Pneumatic Wila 13 mm bottom clamping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Darley EHP 230 43 37 CNC press brake, manufactured in 2008. The machine has a listed pressing strength of 230 tonnes and a folding length of 4,300 mm. It is equipped with a Delem DA-69T CNC control system and six controlled axes: Y1, Y2, X, R, Z1 and Z2. The control console is mounted on the left side of the machine. The display is dark in the available view, so no control interface is shown.
The press brake has hydraulic Wila New Standard top clamping and pneumatic Wila 13 mm bottom clamping. Long upper and lower tooling is fitted along the bed. A LazerSafe-marked sensor unit is mounted beside the tooling area. A rear linear rail assembly with two adjustable carriage or support units is also present.
The machine has blue side covers, with the left cover marked EHP 230. Its exterior surfaces, including the front housing, lower bed and tooling, show visible scuffs, scratches and paint wear. Protective mesh fencing is visible alongside the machine. A red emergency-stop button is positioned beside the control display, with a rotary control, key switch and pushbutton below it.
This Darley press brake combines a 230-tonne listed strength with a 4,300 mm folding length, CNC control and Wila clamping equipment. The visible surface wear should be taken into account when assessing its cosmetic condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 199 |
| Last activity | Oct. 22, 2026 |
CNC абкант преса Darley EHP 230 43 37
CNC ohraňovací lis Darley EHP 230 43 37
Darley EHP 230 43 37 CNC-kantpresse
Darley EHP 230 43 37 CNC-Abkantpresse
CNC στραντζόπρεσα Darley EHP 230 43 37
Darley EHP 230 43 37 CNC press brake
Prensa plegadora CNC Darley EHP 230 43 37
Presse plieuse CNC Darley EHP 230 43 37
CNC abkant preša Darley EHP 230 43 37
Darley EHP 230 43 37 CNC él-hajlító prés
Piegatrice CNC Darley EHP 230 43 37
Darley EHP 230 43 37 CNC lenkimo presas
Darley EHP 230 43 37 CNC-kantpers
Prasa krawędziowa CNC Darley EHP 230 43 37
Prensa dobradeira CNC Darley EHP 230 43 37
Presă abkant CNC Darley EHP 230 43 37
Darley EHP 230 43 37 Листогибочный пресс с ЧПУ
CNC abkant presa Darley EHP 230 43 37
Darley EHP 230 43 37 CNC-kantpress
CNC abkant pres Darley EHP 230 43 37
EN
- Languages
English (GB)