| Manufacturer | CRP Robots |
|---|---|
| Model | CRP-RH20-10 |
| Year | |
| Location | Russia
|
This listing is for a CRP Robots gear hobbing machine, model CRP-RH20-10. The machine is designed for machining large cylindrical gears with a maximum diameter of up to 2000 mm. It can accommodate a wide range of gear tooth modules, including hobbing cutters up to module 20, disk cutters up to module 25, and finger cutters up to module 30. The machine supports machining gears with a tooth line inclination angle of ±45 degrees.
The machine features a table diameter of 1800 mm and can handle workpieces with a maximum mass of 20,000 kg, including fastening elements. It supports hobbing cutters with a maximum diameter of 300 mm and a maximum length of 500 mm. The number of teeth that can be cut ranges from 10 to 1800.
Operational parameters include spindle speeds from 8 to 125 rpm, axial feed rates during running-in from 0.02 to 510 mm/min, and radial feeds from 0.013 to 328 mm/min. The spindle torque is rated at a minimum of 2.5 kN·m. The machine is powered by a three-phase alternating current supply with a nominal voltage of 380 V and frequency of 50 Hz. The main drive power is at least 20 kW. The total weight of the machine is approximately 32,040 kg.
The machine is currently offered without testing due to a power outage at the plant. The price is quoted as being on the foundation. The seller is open to considering various cooperation options.
Additionally, images show a blue industrial robotic arm labeled 'CROBOTP' mounted on a blue base, equipped with multiple motors and joints for articulation. The arm has an attached welding torch or similar tool on its end effector. The robot and surrounding workshop area appear dusty but intact, with no visible external damage. Nearby metal work tables with clamps and fixtures are visible, suitable for holding workpieces. Visible cables and connectors are attached to the robot arm. These components may be related equipment or accessories available in the same workshop environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Gear hobbing machine without testing, power outage at the plant. Price on the foundation.
The largest diameter of machined cylindrical gears, mm 2000.
We will consider all options for cooperation.
The largest module of the machined wheel (not less than), mm:
- hobbing cutter 20
- disk cutter 25
- finger cutter 30*
The largest angle of inclination of the tooth line of the machined gears, degrees ± 45o
Table diameter, mm 1800
The largest mass of the installed workpiece (taking into account the mass of the fastening elements), kg 20000
The largest diameter of the installed hobbing cutters, mm 300
The largest length of the installed hobbing cutters, mm 500
Limits of the number of cut teeth 10...1800
Limits of the spindle speed, rpm 8...125
Limits of axial feeds, mm/min:
- during running-in 0.02…510
Limits of radial feeds, mm/min 0.013…328
Maximum spindle torque (not less than), kN.m 2.5
Type of power supply network current Three-phase alternating
Nominal frequency, Hz 50**
Nominal voltage, V 380**
Main drive power (not less than), kW 20
Machine weight, kg 32040
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Private person / Without company |
| Active since | 2025 |
| Offers online | 5 |
| Last activity | Aug. 28, 2026 |
Gear hobbing machine without testing, power outage at the plant. Price on the foundation.
The largest diameter of machined cylindrical gears, mm 2000.
We will consider all options for cooperation.
The largest module of the machined wheel (not less than), mm:
- hobbing cutter 20
- disk cutter 25
- finger cutter 30*
The largest angle of inclination of the tooth line of the machined gears, degrees ± 45o
Table diameter, mm 1800
The largest mass of the installed workpiece (taking into account the mass of the fastening elements), kg 20000
The largest diameter of the installed hobbing cutters, mm 300
The largest length of the installed hobbing cutters, mm 500
Limits of the number of cut teeth 10...1800
Limits of the spindle speed, rpm 8...125
Limits of axial feeds, mm/min:
- during running-in 0.02…510
Limits of radial feeds, mm/min 0.013…328
Maximum spindle torque (not less than), kN.m 2.5
Type of power supply network current Three-phase alternating
Nominal frequency, Hz 50**
Nominal voltage, V 380**
Main drive power (not less than), kW 20
Machine weight, kg 32040
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a CRP Robots gear hobbing machine, model CRP-RH20-10. The machine is designed for machining large cylindrical gears with a maximum diameter of up to 2000 mm. It can accommodate a wide range of gear tooth modules, including hobbing cutters up to module 20, disk cutters up to module 25, and finger cutters up to module 30. The machine supports machining gears with a tooth line inclination angle of ±45 degrees.
The machine features a table diameter of 1800 mm and can handle workpieces with a maximum mass of 20,000 kg, including fastening elements. It supports hobbing cutters with a maximum diameter of 300 mm and a maximum length of 500 mm. The number of teeth that can be cut ranges from 10 to 1800.
Operational parameters include spindle speeds from 8 to 125 rpm, axial feed rates during running-in from 0.02 to 510 mm/min, and radial feeds from 0.013 to 328 mm/min. The spindle torque is rated at a minimum of 2.5 kN·m. The machine is powered by a three-phase alternating current supply with a nominal voltage of 380 V and frequency of 50 Hz. The main drive power is at least 20 kW. The total weight of the machine is approximately 32,040 kg.
The machine is currently offered without testing due to a power outage at the plant. The price is quoted as being on the foundation. The seller is open to considering various cooperation options.
Additionally, images show a blue industrial robotic arm labeled 'CROBOTP' mounted on a blue base, equipped with multiple motors and joints for articulation. The arm has an attached welding torch or similar tool on its end effector. The robot and surrounding workshop area appear dusty but intact, with no visible external damage. Nearby metal work tables with clamps and fixtures are visible, suitable for holding workpieces. Visible cables and connectors are attached to the robot arm. These components may be related equipment or accessories available in the same workshop environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Private person / Without company |
| Active since | 2025 |
| Offers online | 5 |
| Last activity | Aug. 28, 2026 |
Индустриален робот CRP Robots CRP-RH20-10
Industrialní robot CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Industriel robot
CRP Robots CRP-RH20-10 Industrieroboter
Βιομηχανικό ρομπότ CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Industrial Robot
Robotica industrial CRP Robots CRP-RH20-10
Robot industriel CRP Robots CRP-RH20-10
Industrijski robot CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Ipari robot
Robot industriale CRP Robots CRP-RH20-10
Pramoninis robotas CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Industriële robot
Robot CRP Robots CRP-RH20-10
Robô Industrial CRP Robots CRP-RH20-10
Robot industrial CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Промышленный робот
Industrial Robot CRP Robots CRP-RH20-10
CRP Robots CRP-RH20-10 Industrirobot
Endüstriyel robot CRP Robots CRP-RH20-10
EN
- Languages
English (GB)