| Manufacturer | CORREA ANAYAK |
|---|---|
| Model | VH-Plus-4000 HS |
| Year | 2008 |
| Location | Germany
|
This listing is for a CORREA ANAYAK VH-Plus-4000 HS CNC bed milling machine, manufactured in 2008. It features a HEIDENHAIN iTNC 530 control system, offering precise and versatile CNC operation. The machine has substantial traverse paths with a longitudinal (X-axis) movement of 4,000 mm, transverse (Y-axis) movement of 1,700 mm, and vertical (Z-axis) movement of 1,500 mm, suitable for large-scale milling tasks.
The clamping table measures 4,200 mm in length and 1,100 mm in width, with a maximum load capacity of 10,000 kg. It is equipped with seven T-slots sized 22 mm (H12), spaced 150 mm apart, allowing flexible and secure workpiece mounting.
Feed rates are variable from 2 to 10,000 mm/min across all axes, with rapid traverse speeds up to 22,500 mm/min, and maximum feed forces of 31,400 N in X, Y, and Z directions. The machine incorporates a Correa universal NC milling head (UAD) with automatic swiveling of the front and rear planes, high indexing precision (0.02° steps), and a clamping force of approximately 22,000 kg on the internal Hirth coupling. The spindle motor delivers 30 kW power with a maximum torque of 1,500 Nm, supporting speeds from 60 to 6,000 rpm. The tool holder conforms to SK50 DIN 69871 standards.
An automatic tool changer with 60 tool positions is included, supporting tools up to 125/200 mm in diameter, 400 mm in length, and 25 kg in weight. The machine uses high-precision linear guides and preloaded ball screw spindles with direct measuring systems from HEIDENHAIN, ensuring accuracy and dynamic performance.
The coolant system features an internal supply delivering approximately 36 bar at 30 liters/min, supported by a 350-liter tank and belt filter. Chip removal is managed by two conveyors along the table and an ascending conveyor with coolant tank and lifting pump, ejecting chips at about 1,000 mm height.
Physically, the machine is a large CNC bed type milling machine with enclosure and sliding doors. It is equipped with a control panel mounted on an arm with multiple buttons and switches for operator convenience. Metal steps are positioned beside the machine for easy access. The machine shows signs of use with some wear marks but remains in good physical condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC - BED MILLING MACHINE
Make CORREA ANAYAK
Type VH Plus-4000 HS
Control HEIDENHAIN iTNC 530
Year of construction 2008
Traverse paths
Longitudinal movement (X-axis) 4,000 mm
Transverse movement (Y-axis) 1,700 mm
Vertical movement (Z-axis) 1,500 mm
Clamping table
Clamping surface 4,200 x 1,100 mm
Max. Workpiece weight 10,000 kg
Number and size of T-slots 7 x 22 mm H12
Distance between T-slots 150 mm
Feed rates
X-, Y- and Z-axis, infinitely variable 2 - 10,000 mm/min.
Rapid traverse in X / Y / Z 22,500 mm/min
Max. Feed forces X-Y-Z 31,400 N
Correa universal NC milling head UAD
Automatic swivelling front/rear plane
Indexing 0.02 x 0.02 ° = 162 million positions!
Clamping force internal Hirth coupling approx. 22,000 kg
Motor power 30 kW
Max. Max. torque 1,500 Nm
Number of gear stages 2
Max. Gear reduction 1:5.5
Speed range, infinitely variable 60 - 6,000 min-1
Tool holder SK50 DIN 69871
Pull stud DIN 69872-A
Head lubrication Air-oil mixture with separate automatic lubrication pump
Cooling system for spindle bearings yes
Cooling system for gearbox yes
Automatic tool changer
Tool places 60 places
Tool diameter max. 125/200 mm
Tool length max. 400 mm
Tool weight max. 25 kg
Guides, drive and measuring systems
- All axis drives with digital drives from HEIDENHAIN
- Direct measuring systems for X-, Y- and Z-axis Fabr. HEIDENHAIN
- X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
- Precision ball screw spindles with preloaded nuts in X-, Y- and Z-axis
Coolant system with belt filter
- Coolant outlet at the front of the milling head
- Internal coolant supply, approx. 36 bar and 30 litres/min
- Tank volume approx. 350 litres
- Coolant pump with delivery volume approx. 20 l/min at 4 bar
Chip conveyor
- 2 chip conveyors along the machine table
- 1 ascending conveyor with coolant tank and lifting pump to the left of the machine, ejection at the rear, ejection height approx. 1,000 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 29 |
| Last activity | July 19, 2026 |
CNC - BED MILLING MACHINE
Make CORREA ANAYAK
Type VH Plus-4000 HS
Control HEIDENHAIN iTNC 530
Year of construction 2008
Traverse paths
Longitudinal movement (X-axis) 4,000 mm
Transverse movement (Y-axis) 1,700 mm
Vertical movement (Z-axis) 1,500 mm
Clamping table
Clamping surface 4,200 x 1,100 mm
Max. Workpiece weight 10,000 kg
Number and size of T-slots 7 x 22 mm H12
Distance between T-slots 150 mm
Feed rates
X-, Y- and Z-axis, infinitely variable 2 - 10,000 mm/min.
Rapid traverse in X / Y / Z 22,500 mm/min
Max. Feed forces X-Y-Z 31,400 N
Correa universal NC milling head UAD
Automatic swivelling front/rear plane
Indexing 0.02 x 0.02 ° = 162 million positions!
Clamping force internal Hirth coupling approx. 22,000 kg
Motor power 30 kW
Max. Max. torque 1,500 Nm
Number of gear stages 2
Max. Gear reduction 1:5.5
Speed range, infinitely variable 60 - 6,000 min-1
Tool holder SK50 DIN 69871
Pull stud DIN 69872-A
Head lubrication Air-oil mixture with separate automatic lubrication pump
Cooling system for spindle bearings yes
Cooling system for gearbox yes
Automatic tool changer
Tool places 60 places
Tool diameter max. 125/200 mm
Tool length max. 400 mm
Tool weight max. 25 kg
Guides, drive and measuring systems
- All axis drives with digital drives from HEIDENHAIN
- Direct measuring systems for X-, Y- and Z-axis Fabr. HEIDENHAIN
- X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
- Precision ball screw spindles with preloaded nuts in X-, Y- and Z-axis
Coolant system with belt filter
- Coolant outlet at the front of the milling head
- Internal coolant supply, approx. 36 bar and 30 litres/min
- Tank volume approx. 350 litres
- Coolant pump with delivery volume approx. 20 l/min at 4 bar
Chip conveyor
- 2 chip conveyors along the machine table
- 1 ascending conveyor with coolant tank and lifting pump to the left of the machine, ejection at the rear, ejection height approx. 1,000 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
This listing is for a CORREA ANAYAK VH-Plus-4000 HS CNC bed milling machine, manufactured in 2008. It features a HEIDENHAIN iTNC 530 control system, offering precise and versatile CNC operation. The machine has substantial traverse paths with a longitudinal (X-axis) movement of 4,000 mm, transverse (Y-axis) movement of 1,700 mm, and vertical (Z-axis) movement of 1,500 mm, suitable for large-scale milling tasks.
The clamping table measures 4,200 mm in length and 1,100 mm in width, with a maximum load capacity of 10,000 kg. It is equipped with seven T-slots sized 22 mm (H12), spaced 150 mm apart, allowing flexible and secure workpiece mounting.
Feed rates are variable from 2 to 10,000 mm/min across all axes, with rapid traverse speeds up to 22,500 mm/min, and maximum feed forces of 31,400 N in X, Y, and Z directions. The machine incorporates a Correa universal NC milling head (UAD) with automatic swiveling of the front and rear planes, high indexing precision (0.02° steps), and a clamping force of approximately 22,000 kg on the internal Hirth coupling. The spindle motor delivers 30 kW power with a maximum torque of 1,500 Nm, supporting speeds from 60 to 6,000 rpm. The tool holder conforms to SK50 DIN 69871 standards.
An automatic tool changer with 60 tool positions is included, supporting tools up to 125/200 mm in diameter, 400 mm in length, and 25 kg in weight. The machine uses high-precision linear guides and preloaded ball screw spindles with direct measuring systems from HEIDENHAIN, ensuring accuracy and dynamic performance.
The coolant system features an internal supply delivering approximately 36 bar at 30 liters/min, supported by a 350-liter tank and belt filter. Chip removal is managed by two conveyors along the table and an ascending conveyor with coolant tank and lifting pump, ejecting chips at about 1,000 mm height.
Physically, the machine is a large CNC bed type milling machine with enclosure and sliding doors. It is equipped with a control panel mounted on an arm with multiple buttons and switches for operator convenience. Metal steps are positioned beside the machine for easy access. The machine shows signs of use with some wear marks but remains in good physical condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 29 |
| Last activity | July 19, 2026 |
cnc фреза тип легло CORREA ANAYAK VH-Plus-4000 HS
Frézka cnc stolní CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS cnc bed type fræsemaskine
CORREA ANAYAK VH-Plus-4000 HS CNC-Bettfräsmaschine
φρέζα τύπου κρεβατιού cnc CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS cnc bed type milling machine
Fresadora cnc de bancada fija CORREA ANAYAK VH-Plus-4000 HS
Fraiseuse cnc à banc fixe CORREA ANAYAK VH-Plus-4000 HS
CNC glodalica s krevetom CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS cnc ágy típusú marógép
Fresatrice cnc a banco fisso CORREA ANAYAK VH-Plus-4000 HS
cnc lovos tipo frezavimo stakles CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS cnc-bedfreesmachine
Frezarka CNC łożowa CORREA ANAYAK VH-Plus-4000 HS
fresadora tipo cama cnc CORREA ANAYAK VH-Plus-4000 HS
mașină de frezat tip pat cnc CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS Станок с фрезерной станиной с ЧПУ
cnc mašina za glodanje tipa kreveta CORREA ANAYAK VH-Plus-4000 HS
CORREA ANAYAK VH-Plus-4000 HS fräsmaskin av cnc-bäddtyp
Cnc dikey freze makinesi CORREA ANAYAK VH-Plus-4000 HS
EN
- Languages
English (GB)