| Manufacturer | CMG |
|---|---|
| Model | 55/75/55LHE – SW 2200 TA |
| Year | 2018 |
| Location | Bulgaria
|
| Category | Complete lines - Plastic extrusion |
| Screw diameter | 55 mm |
| Output | 275 kg/h |
| Type | Single screw |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 19/08/2026 |
| Product id | P221110068 |
| Language |
CMG 55/75/55LHE – SW 2200 TA
Vytlačovací linka CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Extrusionsanlage
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Extrusion line
Línea de extrusión CMG 55/75/55LHE – SW 2200 TA
Ligne d'extrusion CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Linea di estrusione CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Linia do wytłaczania CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Экструзионная линия
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Ekstrüzyon hattı CMG 55/75/55LHE – SW 2200 TA
|
This is a CMG coextrusion blow film line model 55/75/55LHE – SW 2200 TA, manufactured in 2018. It is designed for producing 3-layer blown films with a nominal output capacity of up to 275 kg/h.
The line includes three single screw extruders: Extruder A and C both have a screw diameter of 55 mm with a length-to-diameter (L/D) ratio of 30:1, powered by 66 kW AC drives, each capable of a nominal output of 130 kg/h for LDPE with MFI 1.0. Extruder B features a larger 75 mm screw diameter, also with a 30:1 L/D ratio, driven by a 118 kW AC motor, reaching a nominal output of 275 kg/h under the same LDPE conditions. Each extruder is equipped with a lever-type screen changer.
The coextrusion die is a 3-layer CBH500 F/3S-IBC model with a diameter of 275 mm, suitable for LDPE and featuring a gap of 1.6 mm. The system includes an internal bubble cooling system with introduction and extraction air fans rated at 7.5 kW each, and an ultrasonic control system with three sensors for diameter monitoring.
Cooling is enhanced by a double flow high-performance air ring with integrated automatic thickness control (CR350/2 KARAT 2) and a 15 kW blower with inverter and heat exchanger battery. The line is controlled by a DOTECO batch gravimetric dosing and extrusion control system, featuring three gravimetric dosing units with four components each, resin hopper loaders with a centralized vacuum pump, and controls for haul-off speed, extruder speed, and thickness in g/m, kg/h, or microns.
Material handling includes a Basket 2200 RA with carbon rolls that have motorized opening, closing, and vertical movement, all remotely controlled from the operator interface. The horizontal oscillating take-off unit HO 2200/Rev-C supports a nominal width of 2200 mm and film width of 2100 mm, with a water-cooled nip roller, AC motor with inverter-controlled oscillation speed, and motorized gusseting triangles and layflat panels.
Additional features include a web center guide Erhardt Leimer EL2200, an in-line hot knife cut and seal device, and a single station automatic winder TA 2200 SW with a nominal width of 2200 mm, film width of 2100 mm, core diameter of 76 mm (3”), speed range of 0-100 m/min, and maximum roll diameter of 800 mm.
The images show a large roll of black film material on the winding machine, a control panel with screen and buttons on the right side, and a sturdy metal frame structure supporting the rolls, indicating the line is equipped with standard operational components for film production and winding.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA
Year of production 2018
1. Extruder A – Single screw extruder 5530/LHE
- Screw diameter 55 mm
- L/D ratio 30/1
- Extruder drive – 66 kW AC
- Nominal output in LDPE MFI 1.0 130 kg/h
- Lever type screen changer
2. Extruder B – Single screw extruder 7530/LHE
- Screw diameter 75 mm
- L/D ratio 30/1
- Extruder drive – 118 kW AC
- Nominal output in LDPE MFI 1.0 275 kg/h
- Lever type screen changer
3. Extruder C – Single screw extruder 5530/LHE
- Screw diameter 55 mm
- L/D ratio 30/1
- Extruder drive – 66 kW AC
- Nominal output in LDPE MFI 1.0 130 kg/h
- Lever type screen changer
4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm
5. Internal bubble cooling system
- Introduction air fan 7,5 kW with heat exchanger battery
- Extraction air fan 7.5 kW
- Ultrasonic control system with 3 sensors for diameter control
6. Double flow high performance Air ring with integrated automatic thickness control type CR350/2 KARAT 2
- KUNDIG capacitive head for thickness reading installed on railways
- Blower for cooling ring 15 kW with inverter and heat exchanger battery
7. Batch gravimetric dosing and extrusion control system DOTECO
- 3 gravimetric dosing units GRADO ADROIT with 4 components each
- resin hopper loaders on each component with centralized vacuum pump
- control of haul-off speed
- control of individual extruder speed
- control in g/m, kg/h or micron
8. Basket 2200 RA with carbon rolls with motorised opening and closing and up – down moving with remote control from operator’s interface
9. Horizontal oscillating take-off unit HO 2200/Rev-C
- Nominal width 2200 mm
- Film width 2100 mm
- Nip roller with water cooling
- Oscillation - AC motor with inverter controlled speed
- Gusseting triangles with motorised opening and closing with remote control from operator’s interface
- Layflat pannels with motorised opening and closing with remote control from operator’s interface
10. Web center guide Erhardt Leimer EL2200
11. In line hot knife cut and seal device
12. Single station automatic winder TA 2200 SW
- Nominal width 2200 mm
- Film width 2100 mm
- Core diameter 76 mm (3”)
- Speed range 0-100 m/min
- Max roll diameter 800 mmx
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2017 |
| Offers online | 13 |
| Last activity | Nov. 3, 2026 |
Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA
Year of production 2018
1. Extruder A – Single screw extruder 5530/LHE
- Screw diameter 55 mm
- L/D ratio 30/1
- Extruder drive – 66 kW AC
- Nominal output in LDPE MFI 1.0 130 kg/h
- Lever type screen changer
2. Extruder B – Single screw extruder 7530/LHE
- Screw diameter 75 mm
- L/D ratio 30/1
- Extruder drive – 118 kW AC
- Nominal output in LDPE MFI 1.0 275 kg/h
- Lever type screen changer
3. Extruder C – Single screw extruder 5530/LHE
- Screw diameter 55 mm
- L/D ratio 30/1
- Extruder drive – 66 kW AC
- Nominal output in LDPE MFI 1.0 130 kg/h
- Lever type screen changer
4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm
5. Internal bubble cooling system
- Introduction air fan 7,5 kW with heat exchanger battery
- Extraction air fan 7.5 kW
- Ultrasonic control system with 3 sensors for diameter control
6. Double flow high performance Air ring with integrated automatic thickness control type CR350/2 KARAT 2
- KUNDIG capacitive head for thickness reading installed on railways
- Blower for cooling ring 15 kW with inverter and heat exchanger battery
7. Batch gravimetric dosing and extrusion control system DOTECO
- 3 gravimetric dosing units GRADO ADROIT with 4 components each
- resin hopper loaders on each component with centralized vacuum pump
- control of haul-off speed
- control of individual extruder speed
- control in g/m, kg/h or micron
8. Basket 2200 RA with carbon rolls with motorised opening and closing and up – down moving with remote control from operator’s interface
9. Horizontal oscillating take-off unit HO 2200/Rev-C
- Nominal width 2200 mm
- Film width 2100 mm
- Nip roller with water cooling
- Oscillation - AC motor with inverter controlled speed
- Gusseting triangles with motorised opening and closing with remote control from operator’s interface
- Layflat pannels with motorised opening and closing with remote control from operator’s interface
10. Web center guide Erhardt Leimer EL2200
11. In line hot knife cut and seal device
12. Single station automatic winder TA 2200 SW
- Nominal width 2200 mm
- Film width 2100 mm
- Core diameter 76 mm (3”)
- Speed range 0-100 m/min
- Max roll diameter 800 mmx
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Complete lines - Plastic extrusion |
| Screw diameter | 55 mm |
| Output | 275 kg/h |
| Type | Single screw |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 19/08/2026 |
| Product id | P221110068 |
| Language |
CMG 55/75/55LHE – SW 2200 TA
Vytlačovací linka CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Extrusionsanlage
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Extrusion line
Línea de extrusión CMG 55/75/55LHE – SW 2200 TA
Ligne d'extrusion CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Linea di estrusione CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Linia do wytłaczania CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA Экструзионная линия
CMG 55/75/55LHE – SW 2200 TA
CMG 55/75/55LHE – SW 2200 TA
Ekstrüzyon hattı CMG 55/75/55LHE – SW 2200 TA
|
This is a CMG coextrusion blow film line model 55/75/55LHE – SW 2200 TA, manufactured in 2018. It is designed for producing 3-layer blown films with a nominal output capacity of up to 275 kg/h.
The line includes three single screw extruders: Extruder A and C both have a screw diameter of 55 mm with a length-to-diameter (L/D) ratio of 30:1, powered by 66 kW AC drives, each capable of a nominal output of 130 kg/h for LDPE with MFI 1.0. Extruder B features a larger 75 mm screw diameter, also with a 30:1 L/D ratio, driven by a 118 kW AC motor, reaching a nominal output of 275 kg/h under the same LDPE conditions. Each extruder is equipped with a lever-type screen changer.
The coextrusion die is a 3-layer CBH500 F/3S-IBC model with a diameter of 275 mm, suitable for LDPE and featuring a gap of 1.6 mm. The system includes an internal bubble cooling system with introduction and extraction air fans rated at 7.5 kW each, and an ultrasonic control system with three sensors for diameter monitoring.
Cooling is enhanced by a double flow high-performance air ring with integrated automatic thickness control (CR350/2 KARAT 2) and a 15 kW blower with inverter and heat exchanger battery. The line is controlled by a DOTECO batch gravimetric dosing and extrusion control system, featuring three gravimetric dosing units with four components each, resin hopper loaders with a centralized vacuum pump, and controls for haul-off speed, extruder speed, and thickness in g/m, kg/h, or microns.
Material handling includes a Basket 2200 RA with carbon rolls that have motorized opening, closing, and vertical movement, all remotely controlled from the operator interface. The horizontal oscillating take-off unit HO 2200/Rev-C supports a nominal width of 2200 mm and film width of 2100 mm, with a water-cooled nip roller, AC motor with inverter-controlled oscillation speed, and motorized gusseting triangles and layflat panels.
Additional features include a web center guide Erhardt Leimer EL2200, an in-line hot knife cut and seal device, and a single station automatic winder TA 2200 SW with a nominal width of 2200 mm, film width of 2100 mm, core diameter of 76 mm (3”), speed range of 0-100 m/min, and maximum roll diameter of 800 mm.
The images show a large roll of black film material on the winding machine, a control panel with screen and buttons on the right side, and a sturdy metal frame structure supporting the rolls, indicating the line is equipped with standard operational components for film production and winding.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2017 |
| Offers online | 13 |
| Last activity | Nov. 3, 2026 |
EN
- Languages
English (GB)