Contact us to receive an offer.
| Manufacturer | CHIRON |
|---|---|
| Model | FZ 08 KS Magnum |
| Year | 2007 |
| Location | Switzerland
|
The CHIRON FZ 08 KS Magnum is a 5-axis machining center manufactured in 2007, designed for high-precision and versatile metalworking applications. It features a total of five axes and a single spindle, with longitudinal (X-axis) travel of 450 mm, transversal (Y-axis) travel of 270 mm, and vertical (Z-axis) travel of 310 mm. The machine supports drilling up to 12 mm in diameter and tapping up to M8.
The tool changer holds 24 tools, accommodating a maximum tool diameter of 47 mm or 100 mm with free adjacent pockets. Tools can be up to 160 mm in length and weigh a maximum of 1.2 kg. Tool change times range from 0.8 to 2.3 seconds, with an average chip-to-chip time of 2.2 seconds. The spindle uses an HSK-A 40 DIN 69893 nose and operates from 0 up to 36,000 rpm, powered by a 7 kW spindle motor.
The machine's rapid traverse speed is 75 m/min. It requires an air supply of 6 bar and operates on a 50 Hz, 3-phase 400 Volt power supply, with total power consumption of 14 kW and 19 kVA.
Overall dimensions are 2308 mm in length, 1405 mm in width, and 2447 mm in height, with a weight of approximately 3400 kg.
Additional features include tool break control, a status light, and a serial RS 232 interface. The switch cabinet is equipped with an air conditioner to maintain optimal operating conditions.
Visible components include an open machining area with a rotary table and 5-axis head, a control panel featuring a GE Fanuc Series 18i-MB5 CNC interface with numerous buttons and switches, a tool changer carousel inside the machine, and a Renishaw probe sensor mounted internally. The spindle area is equipped with coolant nozzles, which show some signs of use. The machine appears clean and well-maintained overall, with intact side panels and no visible damage to rear electrical and hydraulic connections. A ventilation unit is attached to the machine's side.
This machining center is suitable for complex and precise machining tasks in various metal materials, offering robust construction and advanced capabilities for demanding manufacturing environments. Prospective buyers are advised to verify all details during an inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Number of axis total 5
Number of spindles 1
Longitudinal travel (X-axis) 450 mm
Transversal travel (y-axis) 270 mm
Vertical travel (z axis) 310 mm
Drill capacity 12 mm
Max. taping diameter M 8
Tool changer:
Number of tools 24
Tool diameter max. 47 mm
Diameter with free adjacent pockets 100 mm
Tool lenght 160 mm
Max. tool-weight 1.2 kg
Time of tool changing 0.8 / 2.3 sec
Average chip-to-chip time 2.2 sec
Spindle nose: HSK-A 40 DIN 69893
Spindle speeds:
from 0 rpm
up to 36000 rpm
Rapid traverse: 75 m/min
Air connect 6 bar
Voltage 50 Hz 3x 400 Volt
Spindle motor 7 kW
Total power required 14 kW
Total power required 19 kVA
Machine's weight about 3400 kg
Overall dimensions machine:
Length 2308 mm
Width 1405 mm
Height 2447 mm
Various accessories:
Tool break control
Status light
Interface serial port RS 232
Switch cabinet Air conditioner
this extra information is standard for this model. Please always double-check the details during a visit
The Chiron FZ 08 KS Magnum 5-Axis Machining Center, unveiled in 2007, represents the epitome of precision and versatility in metal machining. Renowned for its advanced 5-axis capabilities and robust construction, this machine offers exceptional performance across a wide range of machining applications.
Equipped with a high-speed spindle and advanced CNC controls, the FZ 08 KS Magnum delivers precise and efficient machining on various metal materials, including steel, aluminum, and titanium. Its simultaneous 5-axis machining capability enables complex and intricate part geometries to be produced with exceptional accuracy and speed, reducing setup time and enhancing productivity.
The machine's rigid construction and stable design ensure stability and accuracy during operation, resulting in consistent and precise machining results. Its customizable settings and adjustable parameters allow operators to optimize machining parameters for specific part requirements, maximizing production output and minimizing waste.
Engineered for durability and reliability, the Chiron FZ 08 KS Magnum 5-Axis Machining Center is built to withstand the demands of continuous operation in demanding manufacturing environments. Its user-friendly interface and intuitive controls simplify operation, reducing setup time and minimizing the risk of errors.
With its proven performance and enduring quality, the FZ 08 KS Magnum remains a preferred choice for 5-axis machining applications since its introduction. From aerospace components to automotive parts, this machining center continues to drive efficiency and innovation in metalworking industries worldwide.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this CHIRON FZ 08 KS Magnum manufactured?
This CHIRON FZ 08 KS Magnum was manufactured in 2007.
How many operating hours does the machine have?
This CHIRON FZ 08 KS Magnum has a total of 13,932 hours of operation.
What is the condition of the machine?
This machining center is in very good condition.
In which sector has this CHIRON FZ 08 KS Magnum been used?
This CHIRON FZ 08 KS Magnum has been used in the watchmaking sector.
What type of machining center is this CHIRON FZ 08 KS Magnum?
This CHIRON FZ 08 KS Magnum machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in the year 2007.
What type of machining center is this CHIRON FZ 08 KS Magnum?
This CHIRON FZ 08 KS Magnum machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in the year 2007.
Does this machine have an internal cooling system for the spindle?
This machine does not have an internal cooling system for the spindle.
Is this equipment equipped with a chip extractor?
This equipment is not equipped with a chip extractor.
What is the condition of this machining center?
This machining center is in excellent condition.
Was the unit cleaned and inspected before sale?
The unit has been thoroughly cleaned and inspected by the seller before sale.
Does this equipment have an internal cooling system?
This equipment does not have an internal cooling system through the spindle.
Is a chip extractor included with this machine?
This machine does not include a chip extractor.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 255 |
| Last activity | Oct. 29, 2026 |
Technical data
Number of axis total 5
Number of spindles 1
Longitudinal travel (X-axis) 450 mm
Transversal travel (y-axis) 270 mm
Vertical travel (z axis) 310 mm
Drill capacity 12 mm
Max. taping diameter M 8
Tool changer:
Number of tools 24
Tool diameter max. 47 mm
Diameter with free adjacent pockets 100 mm
Tool lenght 160 mm
Max. tool-weight 1.2 kg
Time of tool changing 0.8 / 2.3 sec
Average chip-to-chip time 2.2 sec
Spindle nose: HSK-A 40 DIN 69893
Spindle speeds:
from 0 rpm
up to 36000 rpm
Rapid traverse: 75 m/min
Air connect 6 bar
Voltage 50 Hz 3x 400 Volt
Spindle motor 7 kW
Total power required 14 kW
Total power required 19 kVA
Machine's weight about 3400 kg
Overall dimensions machine:
Length 2308 mm
Width 1405 mm
Height 2447 mm
Various accessories:
Tool break control
Status light
Interface serial port RS 232
Switch cabinet Air conditioner
this extra information is standard for this model. Please always double-check the details during a visit
The Chiron FZ 08 KS Magnum 5-Axis Machining Center, unveiled in 2007, represents the epitome of precision and versatility in metal machining. Renowned for its advanced 5-axis capabilities and robust construction, this machine offers exceptional performance across a wide range of machining applications.
Equipped with a high-speed spindle and advanced CNC controls, the FZ 08 KS Magnum delivers precise and efficient machining on various metal materials, including steel, aluminum, and titanium. Its simultaneous 5-axis machining capability enables complex and intricate part geometries to be produced with exceptional accuracy and speed, reducing setup time and enhancing productivity.
The machine's rigid construction and stable design ensure stability and accuracy during operation, resulting in consistent and precise machining results. Its customizable settings and adjustable parameters allow operators to optimize machining parameters for specific part requirements, maximizing production output and minimizing waste.
Engineered for durability and reliability, the Chiron FZ 08 KS Magnum 5-Axis Machining Center is built to withstand the demands of continuous operation in demanding manufacturing environments. Its user-friendly interface and intuitive controls simplify operation, reducing setup time and minimizing the risk of errors.
With its proven performance and enduring quality, the FZ 08 KS Magnum remains a preferred choice for 5-axis machining applications since its introduction. From aerospace components to automotive parts, this machining center continues to drive efficiency and innovation in metalworking industries worldwide.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this CHIRON FZ 08 KS Magnum manufactured?
This CHIRON FZ 08 KS Magnum was manufactured in 2007.
How many operating hours does the machine have?
This CHIRON FZ 08 KS Magnum has a total of 13,932 hours of operation.
What is the condition of the machine?
This machining center is in very good condition.
In which sector has this CHIRON FZ 08 KS Magnum been used?
This CHIRON FZ 08 KS Magnum has been used in the watchmaking sector.
What type of machining center is this CHIRON FZ 08 KS Magnum?
This CHIRON FZ 08 KS Magnum machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in the year 2007.
What type of machining center is this CHIRON FZ 08 KS Magnum?
This CHIRON FZ 08 KS Magnum machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in the year 2007.
Does this machine have an internal cooling system for the spindle?
This machine does not have an internal cooling system for the spindle.
Is this equipment equipped with a chip extractor?
This equipment is not equipped with a chip extractor.
What is the condition of this machining center?
This machining center is in excellent condition.
Was the unit cleaned and inspected before sale?
The unit has been thoroughly cleaned and inspected by the seller before sale.
Does this equipment have an internal cooling system?
This equipment does not have an internal cooling system through the spindle.
Is a chip extractor included with this machine?
This machine does not include a chip extractor.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The CHIRON FZ 08 KS Magnum is a 5-axis machining center manufactured in 2007, designed for high-precision and versatile metalworking applications. It features a total of five axes and a single spindle, with longitudinal (X-axis) travel of 450 mm, transversal (Y-axis) travel of 270 mm, and vertical (Z-axis) travel of 310 mm. The machine supports drilling up to 12 mm in diameter and tapping up to M8.
The tool changer holds 24 tools, accommodating a maximum tool diameter of 47 mm or 100 mm with free adjacent pockets. Tools can be up to 160 mm in length and weigh a maximum of 1.2 kg. Tool change times range from 0.8 to 2.3 seconds, with an average chip-to-chip time of 2.2 seconds. The spindle uses an HSK-A 40 DIN 69893 nose and operates from 0 up to 36,000 rpm, powered by a 7 kW spindle motor.
The machine's rapid traverse speed is 75 m/min. It requires an air supply of 6 bar and operates on a 50 Hz, 3-phase 400 Volt power supply, with total power consumption of 14 kW and 19 kVA.
Overall dimensions are 2308 mm in length, 1405 mm in width, and 2447 mm in height, with a weight of approximately 3400 kg.
Additional features include tool break control, a status light, and a serial RS 232 interface. The switch cabinet is equipped with an air conditioner to maintain optimal operating conditions.
Visible components include an open machining area with a rotary table and 5-axis head, a control panel featuring a GE Fanuc Series 18i-MB5 CNC interface with numerous buttons and switches, a tool changer carousel inside the machine, and a Renishaw probe sensor mounted internally. The spindle area is equipped with coolant nozzles, which show some signs of use. The machine appears clean and well-maintained overall, with intact side panels and no visible damage to rear electrical and hydraulic connections. A ventilation unit is attached to the machine's side.
This machining center is suitable for complex and precise machining tasks in various metal materials, offering robust construction and advanced capabilities for demanding manufacturing environments. Prospective buyers are advised to verify all details during an inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 255 |
| Last activity | Oct. 29, 2026 |
Обработващ център - 5 ос CHIRON FZ 08 KS Magnum
Obráběcí centrum - 5 osé CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum Bearbejdningscenter - 5 akset
CHIRON FZ 08 KS Magnum Bearbeitungszentrum 5-Achsen
Κέντρο μηχανικής κατεργασίας - 5 άξονες CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum Machining center - 5 axis
Centro de mecanizado 5 ejes CHIRON FZ 08 KS Magnum
Centre d'usinage 5 axes CHIRON FZ 08 KS Magnum
Obradni centar - 5 osi CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum Megmunkáló központ - 5 tengely
Centro di lavoro 5 assi CHIRON FZ 08 KS Magnum
Apdirbimo centras – 5 ašių CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum Bewerkingscentrum - 5 assen
Centrum obróbcze 5osi CHIRON FZ 08 KS Magnum
Centro de usinagem - 5 eixos CHIRON FZ 08 KS Magnum
Centru de prelucrare - 5 axe CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum 5-осевой обрабатывающий центр
Obradni centar - 5 os CHIRON FZ 08 KS Magnum
CHIRON FZ 08 KS Magnum Bearbetningscentrum - 5-axligt
5 eksenli işleme merkezi CHIRON FZ 08 KS Magnum
EN
- Languages
English (GB)