Price on request
Make an offer| X Axis | 320 mm |
| Y Axis | 220 mm |
| Z Axis | 270 mm |
| Max. workpiece length | 900 mm |
| Max. workpiece width | 520 mm |
| Max. workpiece height | 270 mm |
| Max. workpiece weight | 500 kg |
| CNC Type | |
| Worktank length | 900 mm |
| Worktank width | 520 mm |
| Worktank height | 150 mm |
| ------------------- | |
| Length x width x height | 3400.0 × 2400.0 × 2300.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Datasheet | Charmilles ROBOFIL 2020SI |
| Last availability date | 08/12/2025 |
This Charmilles Robofil 2020SI wire cutting machine, manufactured in 1999, is designed for precision electrical discharge machining (EDM) with wire cutting technology. The machine accommodates workpieces with maximum dimensions of 900 mm in length, 520 mm in width, and 270 mm in height, supporting a maximum table load of 500 kg. It features a longitudinal traverse (X-axis) of 320 mm, a cross traverse (Y-axis) of 220 mm, and a vertical travel (Z-axis) of 270 mm, allowing for versatile machining capabilities. The machine also supports taper cutting with an angle of plus or minus 30 degrees. It uses electrode wires with diameters ranging from 0.25 mm to 0.30 mm.
The main unit is finished in orange and gray, equipped with protective mesh and various hoses essential for operation. The wire cutting area includes metal clamps and hoses, which appear intact with some dust and usage marks. The wire feeding mechanism consists of a wire spool and pulley system, accompanied by a diagram showing wire routing inside the spool compartment. The cooling unit features a fan on top and multiple hoses connected at the bottom, showing signs of use with some dirt and wear on the exterior.
The control panel is separate from the main unit and includes a screen, keyboard, power buttons, a key switch, and an emergency stop button. A handheld remote control device is attached to the side of the control panel, enhancing operational convenience. Both the machine and control panel show signs of usage but no visible damage, indicating they have been maintained in good condition. This robust EDM wire cutting machine is suitable for precise machining tasks requiring reliable performance and versatility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Max. dimensions of work piece:
Length
900 mm
Width
520 mm
Height
270 mm
Table load max.
500 kg
Longitudinal traverse (X-axis)
320 mm
Cross traverse (Y-axis)
220 mm
Vertical travel (Z axis)
270 mm
Taper-cut +/-
30 °
Diameter of electrode wire:
from
0.25 mm
up to
0.30 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Charmilles Robofil 2020SI manufactured?
This Charmilles Robofil 2020SI wire cutting EDM machine was manufactured in 1999.
Is this Charmilles Robofil 2020SI available for inspection?
This Charmilles Robofil 2020SI wire cutting EDM machine is available for inspection.
Is this machine currently under power?
This machine is under power.
What applications is this Charmilles Robofil 2020SI equipped for?
This Charmilles Robofil 2020SI wire cutting EDM machine is equipped for wire erosion applications.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 222 |
| Last activity | March 10, 2026 |
Max. dimensions of work piece:
Length
900 mm
Width
520 mm
Height
270 mm
Table load max.
500 kg
Longitudinal traverse (X-axis)
320 mm
Cross traverse (Y-axis)
220 mm
Vertical travel (Z axis)
270 mm
Taper-cut +/-
30 °
Diameter of electrode wire:
from
0.25 mm
up to
0.30 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Charmilles Robofil 2020SI manufactured?
This Charmilles Robofil 2020SI wire cutting EDM machine was manufactured in 1999.
Is this Charmilles Robofil 2020SI available for inspection?
This Charmilles Robofil 2020SI wire cutting EDM machine is available for inspection.
Is this machine currently under power?
This machine is under power.
What applications is this Charmilles Robofil 2020SI equipped for?
This Charmilles Robofil 2020SI wire cutting EDM machine is equipped for wire erosion applications.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| X Axis | 320 mm |
| Y Axis | 220 mm |
| Z Axis | 270 mm |
| Max. workpiece length | 900 mm |
| Max. workpiece width | 520 mm |
| Max. workpiece height | 270 mm |
| Max. workpiece weight | 500 kg |
| CNC Type | |
| Worktank length | 900 mm |
| Worktank width | 520 mm |
| Worktank height | 150 mm |
| ------------------- | |
| Length x width x height | 3400.0 × 2400.0 × 2300.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Datasheet | Charmilles ROBOFIL 2020SI |
| Last availability date | 08/12/2025 |
This Charmilles Robofil 2020SI wire cutting machine, manufactured in 1999, is designed for precision electrical discharge machining (EDM) with wire cutting technology. The machine accommodates workpieces with maximum dimensions of 900 mm in length, 520 mm in width, and 270 mm in height, supporting a maximum table load of 500 kg. It features a longitudinal traverse (X-axis) of 320 mm, a cross traverse (Y-axis) of 220 mm, and a vertical travel (Z-axis) of 270 mm, allowing for versatile machining capabilities. The machine also supports taper cutting with an angle of plus or minus 30 degrees. It uses electrode wires with diameters ranging from 0.25 mm to 0.30 mm.
The main unit is finished in orange and gray, equipped with protective mesh and various hoses essential for operation. The wire cutting area includes metal clamps and hoses, which appear intact with some dust and usage marks. The wire feeding mechanism consists of a wire spool and pulley system, accompanied by a diagram showing wire routing inside the spool compartment. The cooling unit features a fan on top and multiple hoses connected at the bottom, showing signs of use with some dirt and wear on the exterior.
The control panel is separate from the main unit and includes a screen, keyboard, power buttons, a key switch, and an emergency stop button. A handheld remote control device is attached to the side of the control panel, enhancing operational convenience. Both the machine and control panel show signs of usage but no visible damage, indicating they have been maintained in good condition. This robust EDM wire cutting machine is suitable for precise machining tasks requiring reliable performance and versatility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 222 |
| Last activity | March 10, 2026 |
Charmilles Robofil 2020SI
Elektroerozivní drátová řezačka Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI Drahterodiermaschine
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI Wire cutting edm machine
Máquina de electroerosión por hilo Charmilles Robofil 2020SI
Machine d'électro-érosion par fil Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Elettroerosione a filo Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Wycinarka drutowa Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI Электроэрозионный вырезной станок
Charmilles Robofil 2020SI
Charmilles Robofil 2020SI
Tel erozyon makinesi Charmilles Robofil 2020SI
EN
- Languages
English (GB)