Challenge CMT-330 Three knife trimmer

Top seller

Price on request

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer Challenge
Model CMT-330
Year 2005
Location Netherlands NL
Loick
Your dedicated contact
Loick L.

Automatic description (AI-Generated)

The Challenge CMT-330 is a three-knife trimmer designed for in-line use, particularly suitable for integration with perfect binders. Manufactured in 2005, this model offers precise trimming capabilities with a maximum untrimmed sheet size of 330 x 330 mm and a maximum trimmed size of 307 x 328 mm. The machine accommodates minimum untrimmed sizes of 178 x 127 mm and minimum trimmed sizes down to 148 x 100 mm, allowing for versatile trimming options. It supports a stack height of 51 mm and trim widths ranging from a minimum of 2.5 mm up to a maximum of 152 mm, making it adaptable to various trimming requirements. The CMT-330 operates at speeds of up to 400 cycles per hour in single stream mode and features memory storage for up to 99 set-ups, facilitating efficient production runs and quick changeovers. Changeover times are fully automatic and can be completed within 20 seconds, enhancing operational efficiency.

This machine is equipped with a 56600 tilt in-feed conveyor, a 56421 cooling down elevator, and a 56420 exit conveyor, which support smooth material handling throughout the trimming process. The unit is mounted on a wooden pallet for ease of transport and positioning. It features a control panel with buttons and a display for operation management, as well as pressure gauges visible on the side to monitor system status. Safety is addressed with emergency stop buttons located on both the front and side panels, along with shock hazard warning labels and UL listing for graphic arts equipment. The main body includes a window that provides an internal view of the trimming area, allowing operators to observe the process.

The machine appears clean and intact, with some minor surface wear and dirt consistent with normal industrial use. Electrical specifications include 230/250 V, 25 A, 3 phase power requirements. Overall, the Challenge CMT-330 is a robust and well-equipped three-knife trimmer suitable for various trimming applications in print finishing environments.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Three knife trimmer - in-line

Make Challenge
Model CMT-330
Year 2005
Serial 05010048
Min untrimmed size 178 x 127 mm
Min trimmed size 148 x 100 mm
Max untrimmed size 330 x 330 mm
Max trimmed size 307 x 328 mm
Stack height 51 mm
Min trim 2.5 mm
Max trim 152 mm
Speed up to 400 cycles per hour in single stream mode
Memory up to 99 set-ups
Change over time Fully automatic within 20 seconds
Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder
Available direct

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Machinery dealer
Active since 2010
Offers online 73
Last activity Nov. 18, 2026

Seller's description

Three knife trimmer - in-line

Make Challenge
Model CMT-330
Year 2005
Serial 05010048
Min untrimmed size 178 x 127 mm
Min trimmed size 148 x 100 mm
Max untrimmed size 330 x 330 mm
Max trimmed size 307 x 328 mm
Stack height 51 mm
Min trim 2.5 mm
Max trim 152 mm
Speed up to 400 cycles per hour in single stream mode
Memory up to 99 set-ups
Change over time Fully automatic within 20 seconds
Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder
Available direct

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.



Automatic description (AI-Generated)

The Challenge CMT-330 is a three-knife trimmer designed for in-line use, particularly suitable for integration with perfect binders. Manufactured in 2005, this model offers precise trimming capabilities with a maximum untrimmed sheet size of 330 x 330 mm and a maximum trimmed size of 307 x 328 mm. The machine accommodates minimum untrimmed sizes of 178 x 127 mm and minimum trimmed sizes down to 148 x 100 mm, allowing for versatile trimming options. It supports a stack height of 51 mm and trim widths ranging from a minimum of 2.5 mm up to a maximum of 152 mm, making it adaptable to various trimming requirements. The CMT-330 operates at speeds of up to 400 cycles per hour in single stream mode and features memory storage for up to 99 set-ups, facilitating efficient production runs and quick changeovers. Changeover times are fully automatic and can be completed within 20 seconds, enhancing operational efficiency.

This machine is equipped with a 56600 tilt in-feed conveyor, a 56421 cooling down elevator, and a 56420 exit conveyor, which support smooth material handling throughout the trimming process. The unit is mounted on a wooden pallet for ease of transport and positioning. It features a control panel with buttons and a display for operation management, as well as pressure gauges visible on the side to monitor system status. Safety is addressed with emergency stop buttons located on both the front and side panels, along with shock hazard warning labels and UL listing for graphic arts equipment. The main body includes a window that provides an internal view of the trimming area, allowing operators to observe the process.

The machine appears clean and intact, with some minor surface wear and dirt consistent with normal industrial use. Electrical specifications include 230/250 V, 25 A, 3 phase power requirements. Overall, the Challenge CMT-330 is a robust and well-equipped three-knife trimmer suitable for various trimming applications in print finishing environments.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2010
Offers online 73
Last activity Nov. 18, 2026

Here is a selection of similar machines - Challenge CMT-330


Used Printing Machines in the Netherlands for Sale

Browse used printing machines located in the Netherlands on Exapro: Heidelberg and Komori offset presses, Canon and Océ production printers, label presses, die-cutters and finishing equipment from Dutch printers. Filter by format, configuration and counters.

Challenge CMT-330 Three knife trimmer