Price on request
View price| Strength | 100 T |
| Folding length | 3100 mm |
| Distance between uprights | 2550 mm |
| CNC | Cybelec DNC 8805 |
| Vertical stroke | 200 mm |
| Engine Power | 11 kW |
| ------------------- | |
| Length x width x height | 5200.0 × 2100.0 × 2900.0 |
| Weight | 9000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Bystronic EP II 31-100 |
| Last availability date | 09/06/2026 |
This listing features a BYSTRONIC EP II 31-100 CNC press brake manufactured in 2006. The machine offers a pressing force of 100 tons and is designed for precise bending operations. It has a folding length of 3100 mm and a stand width of 2550 mm, with a vertical stroke of 200 mm. The overall dimensions of the press brake measure approximately 5200 mm in length, 2100 mm in width, and 2900 mm in height, with a machine weight of around 9000 kg.
The press brake is equipped with an 11 kW engine power and a total connected load of 15 kW. It features a Cybelec DNC 8805 control system, providing user-friendly operation through a control panel mounted on the right side of the machine. The control panel includes a screen and multiple buttons, as well as an emergency stop button and key switch for safety.
Safety is further enhanced by the presence of safety guard panels surrounding the bending area on both sides, complemented by a yellow safety sensor or light curtain device mounted on the guard panel. The machine includes hydraulic crowning and a 2-axis back gauge (X and R axes) to ensure accurate bending results.
The tooling includes various upper tools; however, no lower tool is included. The tooling and clamps show signs of use but appear intact. The rear of the machine reveals motor and hydraulic components, including hydraulic cylinders and piping, all housed within an industrial workshop environment.
The electrical cabinet is open and shows organized and clean wiring, relays, and circuit breakers. The machine's surfaces exhibit signs of wear, scratches, and some dirt, particularly on the front and back panels, consistent with typical usage in an industrial setting. Manuals are included with the machine.
Please note that the technical condition is as inspected where inspected, and no claims are made regarding the machine's operational status beyond the provided specifications and visible components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: BYSTRONIC
Model: EP II 31-100
Year of construction: 2006
Pressure: 100 t
folding length: 3100 mm
Stand width: 2550 mm
Stand projection: 400 mm
Table height: 925 mm
Stroke: 200 mm
Control: Cybelec DNC 8805
Power: 11 kW
Total connected load: 15 kW
Machine weight: approx. 9.0 t
Dimensions (L-W-H): 5.2 x 2.1 x 2.9 m
Technical condition: as inspected, where inspected
Description: Used CNC press brake with 2-axis back gauge, various tools, upper tools (no lower tool), IR safety device, manuals, hydraulic crowning, 2-axis back gauge X + R.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this BYSTRONIC EP II 31-100 press brake manufactured?
This BYSTRONIC EP II 31-100 press brake was manufactured in 2006.
Is this BYSTRONIC EP II 31-100 press brake available for inspection?
This BYSTRONIC EP II 31-100 press brake is available for inspection under power.
What type of equipment is this?
This equipment is a CNC/NC press brake.
What type of machine is this BYSTRONIC EP II 31-100?
This BYSTRONIC EP II 31-100 press brake is a CNC/NC machine.
When was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 16 |
| Last activity | June 9, 2026 |
Manufacturer: BYSTRONIC
Model: EP II 31-100
Year of construction: 2006
Pressure: 100 t
folding length: 3100 mm
Stand width: 2550 mm
Stand projection: 400 mm
Table height: 925 mm
Stroke: 200 mm
Control: Cybelec DNC 8805
Power: 11 kW
Total connected load: 15 kW
Machine weight: approx. 9.0 t
Dimensions (L-W-H): 5.2 x 2.1 x 2.9 m
Technical condition: as inspected, where inspected
Description: Used CNC press brake with 2-axis back gauge, various tools, upper tools (no lower tool), IR safety device, manuals, hydraulic crowning, 2-axis back gauge X + R.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this BYSTRONIC EP II 31-100 press brake manufactured?
This BYSTRONIC EP II 31-100 press brake was manufactured in 2006.
Is this BYSTRONIC EP II 31-100 press brake available for inspection?
This BYSTRONIC EP II 31-100 press brake is available for inspection under power.
What type of equipment is this?
This equipment is a CNC/NC press brake.
What type of machine is this BYSTRONIC EP II 31-100?
This BYSTRONIC EP II 31-100 press brake is a CNC/NC machine.
When was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Strength | 100 T |
| Folding length | 3100 mm |
| Distance between uprights | 2550 mm |
| CNC | Cybelec DNC 8805 |
| Vertical stroke | 200 mm |
| Engine Power | 11 kW |
| ------------------- | |
| Length x width x height | 5200.0 × 2100.0 × 2900.0 |
| Weight | 9000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Bystronic EP II 31-100 |
| Last availability date | 09/06/2026 |
This listing features a BYSTRONIC EP II 31-100 CNC press brake manufactured in 2006. The machine offers a pressing force of 100 tons and is designed for precise bending operations. It has a folding length of 3100 mm and a stand width of 2550 mm, with a vertical stroke of 200 mm. The overall dimensions of the press brake measure approximately 5200 mm in length, 2100 mm in width, and 2900 mm in height, with a machine weight of around 9000 kg.
The press brake is equipped with an 11 kW engine power and a total connected load of 15 kW. It features a Cybelec DNC 8805 control system, providing user-friendly operation through a control panel mounted on the right side of the machine. The control panel includes a screen and multiple buttons, as well as an emergency stop button and key switch for safety.
Safety is further enhanced by the presence of safety guard panels surrounding the bending area on both sides, complemented by a yellow safety sensor or light curtain device mounted on the guard panel. The machine includes hydraulic crowning and a 2-axis back gauge (X and R axes) to ensure accurate bending results.
The tooling includes various upper tools; however, no lower tool is included. The tooling and clamps show signs of use but appear intact. The rear of the machine reveals motor and hydraulic components, including hydraulic cylinders and piping, all housed within an industrial workshop environment.
The electrical cabinet is open and shows organized and clean wiring, relays, and circuit breakers. The machine's surfaces exhibit signs of wear, scratches, and some dirt, particularly on the front and back panels, consistent with typical usage in an industrial setting. Manuals are included with the machine.
Please note that the technical condition is as inspected where inspected, and no claims are made regarding the machine's operational status beyond the provided specifications and visible components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 16 |
| Last activity | June 9, 2026 |
Прес спирачка cnc/nc BYSTRONIC EP II 31-100
Ohraňovací lis cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Trykbremse cnc/nc
BYSTRONIC EP II 31-100 Abkantpresse CNC/NC
Πατήστε φρένο cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Press brake cnc/nc
Prensa plegadora cnc/nc BYSTRONIC EP II 31-100
Presse-plieuse à cnc/nc BYSTRONIC EP II 31-100
Press kočnica cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Nyomja meg a cnc/nc féket
Pressa piegatrice cnc/nc BYSTRONIC EP II 31-100
Paspauskite stabdį cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Kantbank cnc/nc
Prasa krawędziowa CNC/NC BYSTRONIC EP II 31-100
Prensa freio cnc/nc BYSTRONIC EP II 31-100
Presa frana cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Листогибочный пресс с ЧПУ
Pritisnite kočnicu cnc/nc BYSTRONIC EP II 31-100
BYSTRONIC EP II 31-100 Tryckbroms cnc/nc
Cnc / NC abkant pres BYSTRONIC EP II 31-100
EN
- Languages
English (GB)