Contact us to receive an offer.
| Manufacturer | BROTHER |
|---|---|
| Model | TC-31 A |
| Year | 2000 |
| Location | Switzerland
|
The Brother TC-31 A is a vertical machining center designed for precision machining tasks. It features a total of three axes (X, Y, and Z) with travels of 350 mm, 250 mm, and 350 mm respectively, allowing for versatile machining capabilities. The machine is equipped with two tables, each measuring 500 mm in length and 270 mm in width, and can support a maximum part weight of 80 kg. The table surface includes T-slots for secure mounting of workpieces or fixtures.
This machining center has a single spindle with a BT30 spindle nose, capable of stepless speeds ranging from 22 to 22,000 rpm, providing flexibility for various machining operations. The distance from the spindle nose to the table ranges between 200 mm and 550 mm. The tool changer accommodates up to 26 tools, with a maximum tool diameter of 55 mm, a tool length of 200 mm, and a maximum tool weight of 2 kg. The tool magazine is a carousel type with numbered tool holders, which appear clean and intact.
The machine's feed rate ranges from 5 to 20,000 mm/min, with rapid traverse speeds up to 50 m/min. It requires an air connection of 4 to 6 bar and operates on a 380 Volt, 50 Hz, 3-phase power supply, with a total power requirement of 25 kVA. The machine weighs approximately 2100 kg and has overall dimensions of 2341 mm in length, 1410 mm in width, and 2165 mm in height.
Additional accessories include a coolant system, a tool setter, an electronic handwheel, and rinsing guns. The machine features sliding doors with windows for operator visibility and safety, along with a control panel equipped with multiple buttons, switches, a key lock, and an emergency stop button. Warning and danger labels are placed on the lower front panel for safety compliance.
The machine's exterior shows minor signs of wear and dirt marks, while the table surface exhibits slight wear and discoloration without major damage. Interior surfaces and the enclosure have some wear and residue marks. Wiring and hoses are visible around the machine base area. Overall, the Brother TC-31 A is a robust and well-equipped vertical machining center suitable for various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Number of axis total 3
Number of tables 2
Number of spindles 1
Table length
500 mm
Table width
270 mm
Table load max.
80 kg
Longitudinal travel (X-axis)
350 mm
Transversal travel (y axis)
250 mm
Vertical travel (z axis)
350 mm
Tool changer:
Number of tools
26
Tool diameter max.
55 mm
Tool lenght
200 mm
Max. tool-weight
2 kg
Spindle nose: BT
30
Distance spindle nose to table
200 - 550 mm
Spindle speeds:
stepless
from
22 rpm
up to
22000 rpm
Feed range
5 - 20000 mm/min
Rapid traverse:
50 m/min
Air connect
4 - 6 bar
Voltage 50 Hz 3x
380 Volt
Total power required
25 kVA
Machine's weight about
2100 kg
Overall dimensions machine:
Length
2341 mm
Width
1410 mm
Height
2165 mm
Various accessories:
Coolant system
Tool setter
Handwheel electroinic
Rinsing Guns
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was the BROTHER TC-31 A machining center manufactured?
This BROTHER TC-31 A machining center was manufactured in the year 2000.
Is the BROTHER TC-31 A machining center in good condition?
This BROTHER TC-31 A machining center is in good condition.
Does this machining center have an external hour counter?
This machining center does not have an external hour counter.
Has the machine been cleaned and checked?
The machine has been cleaned and checked by the seller.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 10, 2026 |
Technical data
Number of axis total 3
Number of tables 2
Number of spindles 1
Table length
500 mm
Table width
270 mm
Table load max.
80 kg
Longitudinal travel (X-axis)
350 mm
Transversal travel (y axis)
250 mm
Vertical travel (z axis)
350 mm
Tool changer:
Number of tools
26
Tool diameter max.
55 mm
Tool lenght
200 mm
Max. tool-weight
2 kg
Spindle nose: BT
30
Distance spindle nose to table
200 - 550 mm
Spindle speeds:
stepless
from
22 rpm
up to
22000 rpm
Feed range
5 - 20000 mm/min
Rapid traverse:
50 m/min
Air connect
4 - 6 bar
Voltage 50 Hz 3x
380 Volt
Total power required
25 kVA
Machine's weight about
2100 kg
Overall dimensions machine:
Length
2341 mm
Width
1410 mm
Height
2165 mm
Various accessories:
Coolant system
Tool setter
Handwheel electroinic
Rinsing Guns
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was the BROTHER TC-31 A machining center manufactured?
This BROTHER TC-31 A machining center was manufactured in the year 2000.
Is the BROTHER TC-31 A machining center in good condition?
This BROTHER TC-31 A machining center is in good condition.
Does this machining center have an external hour counter?
This machining center does not have an external hour counter.
Has the machine been cleaned and checked?
The machine has been cleaned and checked by the seller.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Brother TC-31 A is a vertical machining center designed for precision machining tasks. It features a total of three axes (X, Y, and Z) with travels of 350 mm, 250 mm, and 350 mm respectively, allowing for versatile machining capabilities. The machine is equipped with two tables, each measuring 500 mm in length and 270 mm in width, and can support a maximum part weight of 80 kg. The table surface includes T-slots for secure mounting of workpieces or fixtures.
This machining center has a single spindle with a BT30 spindle nose, capable of stepless speeds ranging from 22 to 22,000 rpm, providing flexibility for various machining operations. The distance from the spindle nose to the table ranges between 200 mm and 550 mm. The tool changer accommodates up to 26 tools, with a maximum tool diameter of 55 mm, a tool length of 200 mm, and a maximum tool weight of 2 kg. The tool magazine is a carousel type with numbered tool holders, which appear clean and intact.
The machine's feed rate ranges from 5 to 20,000 mm/min, with rapid traverse speeds up to 50 m/min. It requires an air connection of 4 to 6 bar and operates on a 380 Volt, 50 Hz, 3-phase power supply, with a total power requirement of 25 kVA. The machine weighs approximately 2100 kg and has overall dimensions of 2341 mm in length, 1410 mm in width, and 2165 mm in height.
Additional accessories include a coolant system, a tool setter, an electronic handwheel, and rinsing guns. The machine features sliding doors with windows for operator visibility and safety, along with a control panel equipped with multiple buttons, switches, a key lock, and an emergency stop button. Warning and danger labels are placed on the lower front panel for safety compliance.
The machine's exterior shows minor signs of wear and dirt marks, while the table surface exhibits slight wear and discoloration without major damage. Interior surfaces and the enclosure have some wear and residue marks. Wiring and hoses are visible around the machine base area. Overall, the Brother TC-31 A is a robust and well-equipped vertical machining center suitable for various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 10, 2026 |
BROTHER TC-31 A
Obráběcí centrum - vertikální BROTHER TC-31 A
BROTHER TC-31 A
Gebrauchte BROTHER TC-31 A Bearbeitungszentrum Vertikal
BROTHER TC-31 A
Used BROTHER TC-31 A Machining center - vertical
Centro de mecanizado vertical BROTHER TC-31 A
Centre d'usinage vertical BROTHER TC-31 A
BROTHER TC-31 A
BROTHER TC-31 A
Centro di lavoro verticale BROTHER TC-31 A
BROTHER TC-31 A
BROTHER TC-31 A
Pionowe centrum obróbcze BROTHER TC-31 A
BROTHER TC-31 A
BROTHER TC-31 A
BROTHER TC-31 A Вертикальный обрабатывающий центр
BROTHER TC-31 A
BROTHER TC-31 A
Dikey işleme merkezi BROTHER TC-31 A
EN
- Languages
English (GB)