| Manufacturer | Bridgeport |
|---|---|
| Model | XP3-610 (VMC-610 XP3) |
| Year | 2005 |
| Location | Latvia
|
Bridgeport XP3-610, also identified as the VMC-610 XP3, is a vertical machining centre manufactured in 2005. The listed configuration is a three-axis machine with X-axis travel of 610 mm, Y-axis travel listed as 5,110 mm, and Z-axis travel of 510 mm. The Y-axis figure differs from the 510 mm stated in the earlier description, so this specification should be verified before purchase.
The worktable measures 900 × 500 mm, and the maximum part weight is listed as 500 kg. The machine is specified with 24 tool pockets, a maximum spindle speed of 12,000 rpm, and spindle motor power of 21 kW. Its listed weight is 6,400 kg.
These details describe the machine and specifications provided for this listing. The available information identifies the manufacturer, model, year, axis travels, table dimensions, maximum part weight, tool-pocket count, spindle speed, spindle motor power, and machine weight. No further accessories or condition details are specified. Please note the conflicting Y-axis travel figures when reviewing the machine specifications: the provided field gives 5,110 mm, while the previous description gives 510 mm. The remaining listed figures are stated above as provided, without additional claims about operating condition or performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details.Worktable size: 900 × 500 mm
Max workpiece weight: 500 kg
Rapid traverse (X): 43 m/min
Rapid traverse (Y): 43 m/min
Rapid traverse (Z): 36 m/min
Electrical: 400 V, 3-phase, 50 Hz
Full load current: 50 A
Short circuit interrupt rating: 415 V / 10 kA
Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England
Control Brand: FANUC
Control Model: Series 18i-MB
Machine Weight: 6400 kg
Number of Axes: 3
Tool Stations: 24
Spindle Power: 21 kW
Spindle Speed: 12000 RPM
Table Load: 500 kg
Taper Size: BT 40
X-axis Travel: 610 mm
Y-axis Travel: 5110 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details.Worktable size: 900 × 500 mm
Max workpiece weight: 500 kg
Rapid traverse (X): 43 m/min
Rapid traverse (Y): 43 m/min
Rapid traverse (Z): 36 m/min
Electrical: 400 V, 3-phase, 50 Hz
Full load current: 50 A
Short circuit interrupt rating: 415 V / 10 kA
Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England
Control Brand: FANUC
Control Model: Series 18i-MB
Machine Weight: 6400 kg
Number of Axes: 3
Tool Stations: 24
Spindle Power: 21 kW
Spindle Speed: 12000 RPM
Table Load: 500 kg
Taper Size: BT 40
X-axis Travel: 610 mm
Y-axis Travel: 5110 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Bridgeport XP3-610, also identified as the VMC-610 XP3, is a vertical machining centre manufactured in 2005. The listed configuration is a three-axis machine with X-axis travel of 610 mm, Y-axis travel listed as 5,110 mm, and Z-axis travel of 510 mm. The Y-axis figure differs from the 510 mm stated in the earlier description, so this specification should be verified before purchase.
The worktable measures 900 × 500 mm, and the maximum part weight is listed as 500 kg. The machine is specified with 24 tool pockets, a maximum spindle speed of 12,000 rpm, and spindle motor power of 21 kW. Its listed weight is 6,400 kg.
These details describe the machine and specifications provided for this listing. The available information identifies the manufacturer, model, year, axis travels, table dimensions, maximum part weight, tool-pocket count, spindle speed, spindle motor power, and machine weight. No further accessories or condition details are specified. Please note the conflicting Y-axis travel figures when reviewing the machine specifications: the provided field gives 5,110 mm, while the previous description gives 510 mm. The remaining listed figures are stated above as provided, without additional claims about operating condition or performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център Bridgeport XP3-610 (VMC-610 XP3)
Vertikální obráběcí centrum Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Lodret bearbejdningscenter
Bridgeport XP3-610 (VMC-610 XP3) Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Vertical machining center
Centro de mecanizado vertical Bridgeport XP3-610 (VMC-610 XP3)
Centre d'usinage vertical Bridgeport XP3-610 (VMC-610 XP3)
Vertikalni obradni centar Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Függőleges megmunkáló központ
Centro di lavoro verticale Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Vertikalus apdirbimo centras
Bridgeport XP3-610 (VMC-610 XP3) Verticaal bewerkingscentrum
Pionowe centrum obróbcze Bridgeport XP3-610 (VMC-610 XP3)
Centro de usinagem vertical Bridgeport XP3-610 (VMC-610 XP3)
Centru de prelucrare vertical Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Вертикальный обрабатывающий центр
Vertikalni obradni centar Bridgeport XP3-610 (VMC-610 XP3)
Bridgeport XP3-610 (VMC-610 XP3) Vertikalt bearbetningscenter
Dikey işleme merkezi Bridgeport XP3-610 (VMC-610 XP3)
EN
- Languages
English (GB)